Used Concentricity Test Instrument for sale (12,495)

Condition: excellent (used), Here we offer Vötsch shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -80°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions Width 470 mm Depth 650 mm Height 410 mm External dimensions Width 930 mm Depth 2115 mm Height 1970 mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VT 7012 S2 Chjdpfx Asn Arc Asflef Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 Csdpfsxanrxjx Aflehf . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: used, Year of construction: 1983, longitudinal travel 1 mm Chedpju Sbc Aefx Aflsf cross travel 1 mm table length 1 mm weight of the machine ca. 0,5 t dimensions of the machine ca. 1,5x0,8x1,9 m

Year of construction: 2011, operating hours: 3,210 h, condition: excellent (used), Climate test chamber, climate chamber, temperature test chamber WKL 34/40 by Weiss Umwelttechnik Test chamber volume approx. 34 liters Chjdpfx Asw U U Nheflof Internal dimensions approx. 340 x 310 x 280 mm 1 shelf Test chamber lighting: halogen Power: 1.8 kW, 230 volts 0.8 kg refrigerant R404A Temperature range: -40 to +180°C Humidity range: 10 to 98% rH Water tank for 13 liters of demineralized water Simpati control system, color touch display Test programs in automatic mode or manual for temperature and humidity only CE mark Very well-maintained heating chamber from prototype production in the motorsport department of a Wolfsburg-based automobile manufacturer. Only 3,210 operating hours. Unfortunately, no key available. Dimensions approx. 580 x 950 x 980 mm (L x W x H). Weight approx. 190 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'More offers from this seller.'

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Codpjxqqyysfx Aflehf Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here we offer you a RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force 2158 N max. speed 1,3 ms Power amplifier TGA 1500 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Chodpfx Afegkaibjljf Written order possible by email or fax

Condition: excellent (used), CTS Climatic test chamber T-70/600 water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: -Microprocessor-controlled control and monitoring system Simple, user-friendly terminal built into the door. -Digital temperature setpoint and actual value display Simple variation via +/- button -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible Chsdpevaxq Nofx Aflsf -RS 232 interface -2 free switching channels for on-site test material control Insert grid: Stainless steel, contact surface 820 x 710 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Cooling unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to+ 180 °C Temperature deviation ±0.1 to 10.3 K in time Rate of temperature change according to DIN 50 011, part 12 measured in the center of the test room Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x Dx H) External dimensions 1050 x 1850 x 1900 mm (W x DxH) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VT³ 4150 Vötsch temperature test chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Csdju Nh Rbspfx Aflshf

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system Codpfx Afjxdi Ezelshf - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests Csdpfx Asxg Hrkeflehf - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Huda Technology HUD-G809 Drop Shock Test System The system is also suitable for testing batteries. Max load: 100 kg Chjdpfx Asxmiilefljf Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: excellent (used), RMS Type: SW 3509 + amplifier TGD 6000-000.00 and fan Test Manager SWR 900 Power amplifier: TGD 6000 Vibration exciter: SW 3709 High-pressure fan HVM 80-100 GL 270 RMS electrodynamic vibration test system: Technical data system: Performance data Max. Vector force sine 7.5 kN Max. Vector force noise 6.75 kN Max. Vector force shock 13.1 kN Frequency range 0 - 3000 Hz Mass of the vibrating system (Dyn.) 9 kg Main resonance (unloaded) 2.5 kHz Max. Amplitude (sine) 18 mm (noise, shock) 26 mm Max. speed (sine) 1.5 m/s (noise, shock) 2.5 m/s Max. Acceleration sine vibrating system unloaded 833 m/s² Additional load 10 kg 394 m/s² Additional load 30 kg 192 m/s² Additional load 50 kg 127 m/s² Max. Acceleration noise Additional load 30 kg 173 m/s² Max. Acceleration shock vibrating system unloaded 1450 m/s² Chsdpfx Afou Tud Hjljf Additional load 30 kg 335 m/s² Stray field Stray field without counter field coil On the table surface 20 mT 120mm above the table surface 7 mT Stray field with counter field coil On the table surface 10 mT 120mm above the table surface 2 mT Vibration isolator Operating range vertical/ horizontal Resonant frequency 2.7 Hz Operating air pressure 5 bar Pneumatic weight compensation Max. Weight compensation 250 kg Operating air pressure 2.3 bar Cooling Vibration exciter air min. Cooling air volume 9 m/min Max. exhaust air temperature (based on room temperature 35°C) 80°C Power booster air Heat dissipation to room air 1.5 kw Emission: Sound pressure level 1m - distance at a height of 1.6m 105 dBA Electromagnetic field SW 3709 typ. 1.5 mT ( 50Hz) typ. 0.5 mT (100Hz) Electromagnetic field TGD 3000 typ. 150 HT (50Hz) Dimensions / Weights Table diameter / insert thread 224mm / M8 Vibration exciter with integrated isolators 970 × 695 x 950 mm (W x D x H) Weight: 1200 kg Power amplifier 550 x 700 x 2075 mm (W x D x H) Weight: 270 kg Cooling fan 839 x 582 x 900 mm (W x D x H) Weight: 80 kg Connection values: Mains voltage +6/-10% 3 x 400V, 50Hz Connected load 18 KVA Power consumption (sweep mode sine wave) 12 kW Total weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Vötsch Model: VC 0018 Air-cooled climate test chamber Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm Housing dimensions: Width 865 x Depth 1150 x Height 1780 mm Test chamber volume: approx. 190 liters Performance data for temperature tests: Temperature range: -10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.5 K Codpfxow Swrts Afljhf spatially ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 0.6 K/min. Cooling: 0.3 K/min. Heat compensation in the range +20 °C to +50 °C: 200 W Calibration values: +4 °C and +90 °C Performance data for climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Electrical connection: Rated voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.7 kW Rated current: 9.5 A (Neutral conductor plug: loaded) Schuko approx. connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R-134A Buyer Information for Your Safety! The following procedures are carried out on our climate chambers prior to sale: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Technical specifications and information subject to change and errors! Feel free to call us with any further questions.

Condition: excellent (used), Vötsch Model: VT³ 4150 Vötsch Temperature Test Chamber, Air-Cooled Temperature Testing Temperature Range: -40°C to +180°C Rate of Change: Cooling approx. 2.5 K/min Rate of Change: Heating approx. 3.5 K/min External Dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test Chamber Dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 11.5 kW Rated Current: 22.0 A Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information: We perform the following steps on all chambers offered: Chodpfx Afsw Ehutslsf 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: Chodpfx Aoxu I D Djflef 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Chodpfx Aoxr A R Tjflsf Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Chedpsw U Awmefx Aflef Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: good (used), Weiss Type: WK3-600/70 Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatially: ±0.5 to ±1.5 K Heat compensation max.: 2,500 W Specifications for Climate Testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98 % rH Chjdpfow Inmmox Afljf Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % rH Temperature uniformity (spatial): ±0.5 to ±1.0 K Heat compensation max.: 500 W Test chamber volume: 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1,998 mm, Width 1,000 mm, Depth 1,745 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R404A & R23 Weight: 680 kg Important information for you as the buyer: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change. Errors and omissions excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment Chsdpfjv Sr Hzjx Aflof R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Cjderbiyfopfx Aflohf Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Codpfsiu H Hcsx Aflohf Control voltage: 24 VDC Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Zwick / Roell Type: Mflow Area of application With increasing test volumes, the need for a higher degree of automation also increases (compared to the Cflow). The Mflow is a modularly expandable device, with which you can determine the melt mass and melt volume flow rate. The basic version of the Mflow extrusion plastometer is designed for MFR tests according to method A and can be upgraded for MVR tests according to method B. Tests according to the following standards are possible: - Methods A and B according to ISO 1133 - Methods A, B and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 As an option, you can equip the Mflow with the pneumatic weight lift with and without cleaning function, for example. without cleaning function or weight staking. The Mflow can be operated both stand-alone via a modern touch display, as well as with the ZwickRoell testing software on a PC. Technical data Test load: 0.325 - 21.6 kg Compressed air, lubricated, dry: 6 - 10 bar Dimensions Height: 510 mm Width: 360 mm Depth: 419 mm Weight: approx. approx.: 43 kg Test temperature: +50°C - +450°C Display: Capacitive touch display Resolution of the temperature display: < 0.1 K Number of storable parameter sets: >100 Csdpfxjtq Em To Afljhf Temperature accuracy in the range 0 - 75 mm above the nozzle in the temperature range 50°C - 450°C: < 0,3 K Time measurement Error limit (method A): ± 0.02 (with automatic cut-off device) Error limit (method B): ± 0.01 Displacement measurement Error limit (method B): ±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D 1238) Resolution: < 0.005 Multi-device operation on one PC: Available working memory, min.: 1.54 GB Clock frequency: 3 GHz Connectable Mflow extrusion plastometers per PC: 6 Mains connection: 220 - 240 V, 1L/PE/N Power consumption: 2.6 A Mains frequency: 50/60 Hz SW version: V4.2 Year of manufacture: 2021 Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Chsdpfjtrf Ulsx Aflef Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Chodpfet Igc Sex Aflof Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), Vötsch Type: VC 7330/S Water-cooled climate chamber Room volume: 3300 liters Data for temperature tests: Temperature range: -70°C to +180°C Spatial temperature deviation: ± 1 to ± 2 K (corresponds to temperature gradient) (2 to 4) Temperature fluctuation over time in the center of the usable space: ± 0.5 - 1 K Temperature change rate (according to IEC 60068-3-5) Heating: 1.5 K/min Cooling: 1.5 K/min Data for climate tests: Temperature range: +10 to +90°C Chjdpfxeu Au Ere Aflof Humidity range: 10% RH up to 98% RH Temperature fluctuation over time ± 0.2 to -0.5 K Humidity fluctuation over time ± 1% RH to ± 3% RH Dew point range +5°C to +89°C Mechanical load data: of the test chamber floor 150 kg Maximum chamber floor load 250 kg Dimensions of the test chamber: Width 2000 mm x Depth 1150 mm x Height 1510 mm External dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating data: Test chamber lighting: Halogen bulb 12 V, 20 W Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power 15 kW, Rated current 34 A External control via the RS 232 interface is of course possible. Refrigerant: R404A / R23 Weight: 1550 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.