Used Convection Dryers for sale (1,830)

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Lsdpfxezba Nys Al Nsac Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 380 V, We are offering two used Adelco DL 180G-3 Dual 72 double dryers, manufactured in 2018 & 2019. The dryers can also be purchased individually. Please send a private message. Manufacturer: Adelco Laodpfxezai Tfe Al Nec Model: DL 180G-3 Dual 72 Year of manufacture: 2018 & 2019 Condition: used Voltage: 380 V Frequency: 50/60 Hz Power consumption Pmax: 7 kW Max. rated burner heat capacity per burner: 75 / 65 kW Heat output per burner: 250,000 / 225,000 B.T.U. Gas connection pressure (natural gas): 20 mbar Gas connection pressure (propane): 37 mbar Gas connection connection (natural gas): 3/4" Gas connection connection (propane): 1/4" Burner operating pressure (natural gas): 2.6 / 6.6 mbar Burner operating pressure (propane): 2.1 / 10 mbar If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 49,000 h, functionality: fully functional, volume flow: 600 m³/h, pressure: 10 bar, operating pressure: 10 bar, input voltage: 400 V, pressure (max.): 10 bar, nominal power: 55 kW (74.78 HP), Equipment: compressor, type plate available, Well-functioning Ingersoll-Rand frequency-controlled screw compressor, 55 kW, 10 m³/min, max. 10 bar. Lsdpfey Sv Rijx Al Neac

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant dryer Manufacturer: Motan Type: ADC 200/10/20 Connection power: 5.6 kW Dry air flow rate: 200 m3/h 5 material silos Manufacturer: Motan Type: BC-30 Ltr. Additional heating: 1.55 kW 5 material conveying units Manufacturer: Motan Type: HLS-06-1-A000-0 Lodpfx Asyvfibjl Noac With vacuum pump VACOM Type: VC 340-720 Power: 4.6 kW With central filter and control system by Motan PRICE REDUCTION FROM 6500 TO 5500 EUR!!!

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection power: 6 kW Dry air flow rate: 200 m3/h With vacuum pump VACOM Type: VC 340-720 Power: 4.6 kW Ledpoyvfkrefx Al Noac With central filter and control system from Motan Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 pieces PRICE REDUCTION FROM 8,500 TO 7,500 EUR!!!

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, construction height: 1,120 mm, drive type: Lithium-Ionen, construction width: 890 mm, Scrubber Dryer Chassis Number: NR810NEU Condition: New unit Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 24V Battery Capacity: 200Ah Battery Type: Waterless Battery Year of Manufacture: 2025 Battery Condition: New Description: Ledpfxoy Uph Hs Al Noac - Delivers efficient cleaning performance of up to 4,860 m² per hour. - Compact design with a low center of gravity, tight turning radius, and flexible operation. - Integrated waterproof touch panel with LCD display for showing operating parameters and error codes; facilitates parameter adjustment and fault diagnosis. - Three speed settings and adjustable water flow. - Proprietary controller featuring protection against motor overload and low battery, effectively extending the life of both motor and battery. - ECO mode to reduce suction motor power and noise level, ideal for noise-sensitive environments. - Electric one-touch lift function for brush and squeegee holders; squeegee holder is automatically lifted when reversing for safe and efficient operation. - Dual brush/pad design with innovative quick-connect system for brushes or pads, making them easy to load and unload. - 120-liter fresh and dirty water tank capacity reduces the frequency of filling and emptying. Automatic alarm when clean water tank is empty or dirty water tank is full. - Large opening reversible dirty water tank with tool-free disassembly for easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to stop automatically when the operator leaves the seat. - Non-slip, durable tyres for reliable traction and optimal grip, even on smooth or wet floors.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: imopLiteNEU, total length: 340 mm, sweeping width: 368 mm, empty load weight: 17 kg, fuel type: electric, construction height: 1,200 mm, drive type: Elektro, construction width: 430 mm, Scrubber dryer Chassis number: imopLiteNEU Condition: New device Technical condition: New Front tyres condition: New Rear tyres condition: New Battery voltage: 18V Battery capacity: 12Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Laodoy Uphajpfx Al Noc Battery condition: New Description: - Productivity (per hour), theoretical max: 1,400 sqm - Battery runtime (100% charge), max. runtime in min.: 70 - Battery charging time (100% charge), max. charging time in hrs: 3.5 - The device is offered including battery and matching charger.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: imopXLPlusNEU, total length: 351 mm, sweeping width: 460 mm, empty load weight: 27 kg, fuel type: electric, construction height: 1,199 mm, drive type: Elektro, construction width: 480 mm, Scrubber dryer machine Chassis number: imopXLPlusNEU Condition: New unit Technical condition: New Front tyre condition: New Rear tyre condition: New Battery voltage: 24V Battery capacity: 9Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: - Productivity (per hour) theoretical max: 1,800 sqm - Battery runtime (100% charge), max. operating time in min.: 85 - Battery charging time (100% charge) – max. time in hours: 5 - The machine is offered including battery and suitable charger Ljdpfey Upg Nox Al Noac

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ANB510NEU, total length: 1,030 mm, sweeping width: 580 mm, empty load weight: 220 kg, fuel type: electric, construction height: 1,045 mm, drive type: Elektro, construction width: 580 mm, Scrubber Dryer Chassis Number: ANB510NEU Condition: New Technical Condition: New Front Tyre Type: Polyurethane Front Tyre Condition: New Rear Tyre Type: Polyurethane Rear Tyre Condition: New Battery Voltage: 24V Battery Capacity: 120Ah Battery Type: Lithium-ion Battery Year: 2025 Battery Condition: New Ledpfx Aey Upg Ael Neac Description: - Theoretical cleaning performance: 2,570 m² per hour - AI-based scrubber dryer robot for commercial areas - Autonomous navigation with advanced 3D LiDAR technology - Powerful NVIDIA Xavier AI edge computing chip for intelligent route planning and environment adaptation - High level of safety with 360° sensor technology - Robust, durable construction - Low-maintenance and updatable via OTA without technician

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR1060NEU, total length: 1,800 mm, sweeping width: 1,060 mm, empty load weight: 477 kg, construction height: 1,350 mm, drive type: Lithium-Ionen, construction width: 1,150 mm, Scrubber Dryer Chassis Number: NR1060NEU Condition: New Equipment Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 36V Lasdpfx Aley Upgve Noc Battery Capacity: 200Ah Battery Type: Waterless Battery Year: 2025 Battery Condition: New Description: The NR1060 is a medium to large front-wheel drive scrubber dryer with twin brushes. - Delivers an efficient cleaning performance of 6,890 m² per hour. - The coarse dirt basket in the waste water tank effectively filters large debris to prevent drain blockages. - The entire machine features a modular and compact design for enhanced manoeuvrability and flexibility. - The low centre of gravity, thanks to the water tank and battery positioning, ensures high driving safety and easy maintenance. - Integrated waterproof touch panel design for intuitive operation: adjust driving speed, water flow, raise/lower brushes, etc. - Large LCD display shows machine settings and simplifies fault diagnostics and maintenance. - Standard electronic water level indicators for fresh and waste water tanks; intuitive and convenient display. Automatic alarm and shutdown when waste water tank is full. - One-touch soft start for the motor with overcurrent and undervoltage protection for the control electronics. - Patented disc brush quick-release design allows for easy automatic loading and unloading of brushes at the push of a button. - ECO mode reduces energy consumption and noise level – ideal for low-noise work environments. - Operating time of 5–6 hours per charge. - Non-slip, durable tyres ensure secure grip and optimal traction, even on smooth or damp floors.

Condition: defective spare-parts repository (used), Year of construction: 2009, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: 870420, Electrically heated recirculation oven. Control system is defective. Repair offer is available. The control system needs to be repaired and the seals need to be replaced. Dimensions: width 2700 x length 2500 x height 1200 mm. Usable volume: 7.4 m3. Steam chamber: 10 m3. Heating capacity: 180 kW. Maximum temperature: 600°C. Max. air volume flow: 5000 m3/h. The oven also features a car bottom for loading/unloading and a wide, split door. The oven has seen little use. It is currently dismantled and in storage. Ljdpfx Aexnx E Sol Nsac

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Ledpfodzqn Ujx Al Noac Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Lsdjx R D Efepfx Al Noac Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, Equipment: documentation/manual, Giardina high-temperature dryer, manufactured in 2007. Function: Drying of water-based coatings on door panels. Lasdpfjzcnu Hox Al Nec Paternoster system.

Condition: used, Year of construction: 1998, Technical details: total power requirement: 0,16 kw dryer Buran Buran DSM, YOM 1998; capacity 0,16kW, possible pressure 16bar, Filter-Ultramat Typ AG 0009, with internal safety against overpressure - with oil separator Ljdpfxeu Nzxfo Al Njac *

Condition: like new (used), Year of construction: 2023, Like-new screw compressor with a 3.5 kW motor, manufactured in 2022. Includes an air dryer made by Airtec, model Pro 1100, also like new, manufactured in 2023. 0.38 kW, with a 220 V plug. Lsdpfx Aezdcdrol Noac

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse Lsdpfx Alsy Ragfj Neac - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: good (used), Year of construction: 2020, operating hours: 22 h, Internal Article No.: 25019 Scrubber Dryer Laedpfswq Nd Tjx Al Noc Nilfisk BA 751 Serial No.: 3510172302 101 Year: approx. 2020 / 2021 (not visible) Only approx. 21.5 operating hours! The machine works perfectly and will continue to be used until sold. Therefore, additional operating hours may be added.

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 20005261297, Schneider tradesman compressor complete system with integrated dryer mounted on steel pallet. Very good condition! Equipped with ready-to-connect star-delta switch, see picture. The dryer is mounted on the rear side of the tank! Ljdsy Atutjpfx Al Neac

Condition: used, Year of construction: 1987, Compressor Make : Ingersol Rand Type : Centac C60Mx2 Centrifugal Original YOC : 1987 Lodpfx Aljy Spnus Neac Our supplier bought the mc in 1997, fully reconditioned from Ingersol Rand in Belgium , only used for 2 years in 1 shift, thereafter serviced & stored . User was Picanol demo project in Belgium. See below pictures to see condition & completeness of the unit. Air dryer Hiross MDA65 is included in the package. Intake Pressure : 98 kPa Intake Temperature : 15 °C Relative Humidity : 60% Delivered Capacity : 61 m3/min Discharge Pressure : 800 kPa Cooling water temp : 15 °C Cooling water flow : 450 l/min Rated speed : 2970 n/min Motor rating : 430 kW

Condition: excellent (used), functionality: fully functional, Buffer belt, stainless steel dryer 3-piece buffer belt Belt width: 1500 mm Ledpswb Sqwjfx Al Noac Stainless steel Length: approx. 17.5 meters Width: 2500 mm Height: 3050 mm Weight according to specification: approx. 8000 KG Elements under the belt are not included

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Ledpfx Aley Tiyaj Neac A total of four dryers of this model are available.

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Feature Details Rotor Diameter 500 mm Rotor Length 3000 mm Rotor Speed 1000 rpm Drive Power 18.5 kW Screen Hole Size Standard: 2.5 mm; Max: 3 mm Housing Material Stainless Steel Rotor Material Mild Steel Bearing Type Flange Bearing Throughput (HDPE) Up to 3.5 tonnes per hour Throughput (PET) Up to 3.5 tonnes per hour Throughput (LDPE) Up to 2 tonnes per hour • Inclined cylindrical trough design for efficient washing and transport • High-speed paddle rotor generates friction to clean contaminants • Replaceable screen with automatic rinsing/self-cleaning system • Water injection system for enhanced cleaning performance • Easy maintenance with accessible rotor and screen Lajdpfx Alowm I S Is Njc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 0.2 kW (0.27 HP), total length: 205 mm, total width: 280 mm, total height: 380 mm, overall weight: 11 kg, number of chambers: 1, Equipment: CE marking, Container volume: 6 L Maximum power consumption: 200 W Air consumption: 3 Nm3/h Laedpfezc Rcyox Al Njc Pressure range: 6-10 bar Total weight: 11 kg

Condition: used, Year of construction: 2026, operating hours: 987 h, functionality: fully functional, machine/vehicle number: 31681614, overall weight: 415 kg, power: 8 kW (10.88 HP), volume flow: 1.14 m³/h, operating pressure: 10 bar, noise level: 81 dB, Equipment: refrigerant dryer, used prototype (immediately available): RENNER Riko 1400/500 M-KT Piston Compressor with 2 x 4.0 kW piston compressors with RENNERtronic Touch control (base load change control + runtime limitation) wall mounting box with galvanized 500-liter tank standing with refrigerant dryer (DTP +3°C) and timed condensate drain with automatic level-controlled tank drainage Year of manufacture: 2026 Operating hours per compressor: 987 h Technical data: Motor power: 2 x 4.0 kW Rated voltage: 400 V Maximum pressure: 10 bar Delivery volume at 7 bar: 1140 l/min Cylinders / stages: 2/2 Noise level: 81 dB(A) Compressed air tank volume: 500 liters Dimensions L x W x H: 1890 x 712 x 1446 mm Weight: 415 kg Lodozb Etdepfx Al Neac Shipping possible at extra cost. Leasing offer from our house bank possible for businesses. Takeover at the end of the term by payment of a final installment possible. Creditworthiness required. We always have a large selection of new and used compressors in stock! Immediately available.