Used Copper Granules for sale (1,073)

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W Iiedpfx Agsk Egrts Nsh - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Equipment and technical data: Working dimensions Workpiece thickness: 8–60 mm Workpiece width: from 70 mm Edge height: up to 8 mm Edge thickness for roll material: up to 3 mm Feed Speed adjustable from 8 to 14 m/min, stepless regulation Gluing technology Glue system for granulate Glue pot located above the feed Interchangeable pot HOMAG QA 65 N Designed for EVA and PUR processing Quick-change function Units Jointing milling unit Pre-heating zone Pressure station, NC-controlled Front and end trimming with two motors Station for flush, radius, and bevel processing Corner rounding unit with two motors Scraper blades: profile and flat scraper Buffing unit Additional equipment and operator features Integrated spraying device Air cushion table for workpiece support PU pressure rollers Mechanical infeed barrier HOMAG powerTouch operator interface Right-hand machine version CE-compliant Iiedpfx Aoxizuljg Noh Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: approx. December 2025 Location: North Rhine-Westphalia (NRW)

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: Isdpfx Aeu Th S Ssg Njih one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: not inspected (used), Brewery tanks comprising: Moeschle mash tun, 9,000 litre Moeschle stainless steel copper kettle, 12,350 litre Moeschle cold liquor tank, 18,000 litre 2 - Moeschle square fermentation vessels, each 11,700 litre STB Engineering fermentation vessel, 11,800 litre, 2400mm square Eastfield Process stainless steel tank, advised circa 5,000 litre 4 - Moeschle racking / conditioning vessels, 8,850 litre / 8,950 litre Iisdpfxjwifdte Ag Noh

Condition: excellent (used), Year of construction: 2020, operating hours: 759 h, Edgebander Akron 1130 J Year of manufacture: 2020, recently serviced - 7.1 kW, 7 bar - Edge thickness: max. 5 mm - Panel thickness: max. 50 mm - Coil material thickness: max. 3 mm - Workpiece length: min. 150 mm; Workpiece width: min. 85 mm - Feed speed: max. 9 m/min - Glue system: Granulate, lower glue pot; BIESSE glue system SP 01, quick-change glue pot - Strip magazine, spray unit - With BIESSE jointing unit RT 01 - Preheating zone, end trimming unit: 1 motor, BIESSE end trimming unit IT 01 - Flush/radius/chamfer units: 1 BIESSE fine milling unit RF 01 - Corner rounding unit: 1 motor, BIESSE corner rounding unit AR 01 - Scraper unit: profile scraper, flat scraper - Buffing unit - Nesting package: flush/radius/chamfer units, profile scraper - Execution: left-handed machine - Machine length: 4,215 mm; Weight: 1,000 kg - Total operating hours: 759.48 h; Total processed length: 46,284 m MACHINE AVAILABLE APPROX. FROM WEEK 42/2025!! Iiodpfxswzycne Ag Neh

Condition: refurbished (used), Year of construction: 2017, EDGEBANDER WITH NUMERICAL SETTINGS WITH EDGE DRESSER (ROUTER) & ROUNDING UNIT Brand: SCM Type (Model): K 360 HP-T-ER1 Serial no.: AH/120944 Ref: 123304 Year: 2017 (Photos taken before overhaul, before functional tests & before cleaning) MACHINING CAPACITIES : - Height of panel to be machined: 8 - 58 mm Thickness 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum width of panel to be machined: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - StarTouch control - Predisposition for barcode reading - Ø800 mm unwind tray - Front extension - Easy size: digital positioning of infeed guide and feed height - Non-stick spray unit - Edge straightener (RT-V) 12000 rpm - Infrared panel preheating at infeed - Gluing unit (VC-VM) with interchangeable glue container for 1 kg granules. Heating time 12 minutes Pneumatic pre-cutter Digitized positioning (pressing) with 3 rollers Iisdpferx S Ipjx Ag Njh including 1 motorized and timed roller - Tilting butt-cutting aggregate 0-20° 12000 rpm - Digitized positionning top/bottom trimming unit with copying. Milling cutter 1/4 round 2 mm (or chamfer) 12000 rpm - R2mm rounding aggregate 12000 rpm with digitized positionn. - Scrapers R1&2 mm top/bottom with digitized positions - Straight scrapers top/bottom - Edge finishing spray device (Nebulization) OTHER FEATURES : - Grinder motors: 2x2 kW - Cutting motors: 2x 0.19kW - Up/down motor: 0.30 kW - Drive motor: 1.1 kW - Milling motor group: 2x 0.65kW - CE marking - Lockable contactor, Mushroom stops - Power supply: 380v. Three-phase 50 Hz - Pneumatic supply: 8-10 bars (max), dry air - Suction: 1x Ø100 and 5x Ø80 mm Heads: 780 m3/h Trimming 360 m3/h Scrapers 2x360m3/h Max. foreseeable footprint in running order : 10.80 x 2.40 m Transport dimensions (WxDxH) : 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with assembled tools, manual, spare parts list and drawings. On order, the machine will be overhauled and brought up to standard, with inspection and dynamic functional testing.

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 6000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 21 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel Iiedpfxsgvq D Uj Ag Neh - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - d 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Year of construction: 2002, operating hours: 20,204 h, condition: ready for operation (used), Control Unit Brand BATTENFELD Iisdpexmbyisfx Ag Neh This Battenfeld Vertical R60 125H was manufactured in 2002. It includes a Simar granulate dryer, enhancing its functionality. An optional package offers an Easychill water cooler and two single temperature control units for an additional cost. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), overall weight: 1,760 kg, Year of construction: 2011, Vespa granulator available immediately. The machine is currently disconnected at the customer's site and has been removed in working condition. The installation is complete with blower and conveying system. Technical specifications: Output: 250 - 400 kg/h Rotor diameter: 400 mm Rotor knives: 6 x 300 (pcs x mm) Stator knives: 4 x 300 (pcs x mm) Power: 30 kW Weight: 1,760 kg Transport dimensions of granulator: 2,420 x 1,520 x 1,230 mm Iisdpfx Aexln Ikjg Njh

Condition: used, Uniloy UR110 16 Head Reciprocating Screw Blow Moulding Machines (2x 2012) With Ancillary Equipment Each with: Uniloy Milacron RTM 4 trimmer (2012) Isdsxn N Abjpfx Ag Nsih Uniloy Milacron leakage control 5x Moretto hopper loaders 2x Moretto FC400PB filter units Shared between Uniloy blow moulders 3x Beccaria TV 2500 granule mixer dryer, 2,500L capacity Maguire WSB-940T gravimetric blender Moretto TLC 05S3 manifold Moretto VTS1120W60 side channel suction unit Tria BM90-42 granulator with acoustic enclosure (2014) Demag pillar jib crane

Condition: excellent (used), Year of construction: 2014, IFE eddy current separators are used for separating non-ferrous metals (aluminium, copper, brass, etc.) from all types of bulk material. IFE eddy current separator, central system INP including discharge hood, feeder tray, support frame, and control unit. Working width: 2000 mm Rotational speed: 2500 rpm Main drive: 11 kW Conveyor drive: 2.2 kW Iiodpfx Agswxfqre Nsh Weight approx. 3200 kg Dimensions incl. discharge hood: L = 4300 mm W = 2900 mm incl. main drive H = 1250 mm incl. discharge hood IFE feeder tray, type: UE-1900x2000 F-2LM865T Working length = 2000 mm Working width = 1900 mm 2x vibration motors Dimensions LxWxH 2230 x 2200 x 1900 mm Weight approx. 1300 kg Support frame made of steel girders, platforms, stairs, discharge plate. Very well-maintained control cabinet with control system available. Machine available immediately.

Condition: good (used), Year of construction: 2000, Colortronic CTT 30 Granule Dryer For climate- and air-independent drying of thermoplastic granules and regrind prior to processing, removing residual moisture from both the inside and outside of the granules. Colortronic dry-air dryers operate according to the absorption principle. Instead of heating the air, the moisture is absorbed and removed in the drying hopper. Ijdpexlrdcefx Ag Noih Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Main fuse: 25 A Year of manufacture: 7/2000 Find more items - new and used - in our shop! International shipping costs on request!

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Iedsr I E Exopfx Ag Nsih * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Year of construction: 2012, operating hours: 7,357 h, condition: ready for operation (used), Movement X-Axis Movement 600 Y-Axis Movement 420 Z-Axis Movement 370 Additional Equipment Replaceable paper filter / SEC-10 (C-axis) / SGF2 Nano Wear Unit / Fire Extinguisher / TMM3 Power Generator / Dielectric Cooling Unit / 15" TFT Touch Screen / Lowerable Work Container Linear motor (X-, Y-, Z-axes) / Glass scales in X-, Y-, Z-axes / Ceramic work area / Remote control Accessories include electrodes (graphite, tungsten, and copper), electrode holders, and jigs with documentation. / Some electrode holders with electrodes are still in the machine. This Sodick AG60L Die-sink EDM machine was manufactured in 2012. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine includes a linear motor, glass scales, and a remote control for enhanced precision and ease of use. Consider the opportunity to buy this Sodick AG60L die-sink EDM machine. Contact us for more information about this machine. Iiedpfxow Nlbqo Ag Nsh Application Types EDM

Year of construction: 2020, condition: new, Feeding for granulate and powder Iisdpfxjfmn Ufe Ag Nsh

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 4000 x 2000 x 270 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Ijdpfx Agev Uz Tis Neih Max. workpiece weight: 3000 kg Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. brass: 20 mm Length: 12500 mm Width: 3650 mm Height: 2620 mm Machine weight: 18000 kg

Condition: good (used), Year of construction: 2006, VERY POWERFUL GRANULATOR WITH HIGH CAPACITY Technical data: Rotor Length 4 000 mm Rotor Diameter 1 200 mm Power 500 kW Iiedoxfrqispfx Ag Nsh Weight approx. 35 tons The machine is dismantled on stock.

Year of construction: 2012, condition: good (used), Colortronic Dry-Flex M400 Granule Dryer For sale is a used Dry-Flex M400 granule dryer from Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (Germany) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating power: 33 kW Iodpfexlqztex Ag Njih Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granule dryer / plastic dryer Area of ​​application: Plastics processing, injection molding, extrusion Condition: Used, functional Buy Colortronic Dry-Flex M400 granule dryers and other items at a great price – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for Iiedpfx Ajk Uqhaeg Neh workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Machine number: 133 Machine has been completely overhauled New Glue Jet 301 gluing system (top section, 1 mm) All units inspected All cutters re-sharpened All knives replaced - Electrical system for stepless feed, 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 jointing cutters for trimming panel edges - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit 1801 / 1802 - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit 1801 / 1802 - Edge feed 1901 fully automatic - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - Granulate supply hopper - Pressure unit 1913 MOT - Pneumatic end trimming unit 1918 (60 mm) - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profiling unit 1833 MOT4 - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2 - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) Iiedpfx Agjwka Iis Nsh - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2022, This price applies exclusively to the demonstration machine only. Machine Dimensions: • (L x W x H) 5308 mm x 2810 mm x 1860 mm, length with filter 6582 mm. Technical Details: • Year of manufacture: 2022 • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 2 kW • Z-axis travel: 125 mm • Max. synchronized speed (X-Y): 141 m/min • Max. acceleration (X-Y): 14 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm • Cutting capacity: • Steel: 12 mm • Stainless steel: 6 mm Iedpjd R Uzrefx Ag Noih • Aluminium (AlMg3): 6 mm • Brass: 6 mm • Copper: 3 mm Standard Equipment: • Control unit: Bosch Rexroth • Laser head: Precitec light Cutter F 125 Focus (manual) • Sheet metal detection and measuring system • Positioning laser diode • Central lubrication unit • Chip tray • Software: Lantek or Metalix CAD/CAM software with auto-nesting • Remote control: Remote maintenance • Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline The machine can be viewed and demonstrated at any time by appointment in our demonstration center in Staufenberg. Additional machines are available for demonstration in Staufenberg. We are happy to provide further information upon request.

Year of construction: 1996, condition: used, functionality: unexamined, Used Schwaben Liquid Silo – Tank 5000 Liters Connections for cooling/heating water (external) for circulation via internal copper piping Manufacturer: Schwaben Kunststoff GmbH Material: PE-HD Plastic Iodpfxsxiwi Ee Ag Noih Max volume: 5.0 m³ Manufactured: 1996 Cylinder height: 3000 mm

Condition: used, Year of construction: 2001, Dimensions (LxBxH): 80 x 90 x 130 cm Iisdpfx Ajvlzf Hsg Njh Manufacturer : Frewitt Model: MG-123 Year : 2001 ATEX Classification: EExe Type : Oscillating granulator Materials : Stainless steel Overall dimensions : 80 x 90 x 130 cm Motor power : 0,37 KW Motorisation : Stober Rotor: 100 mm x 80 mm Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Various grids supplied with equipment

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection Iodpfx Agsppgcys Njih - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: used, Year of construction: 1993, Power: 1 kW (2 HP) Empty weight: 450 kg Current frequency: 50 Hz Iiedpfx Aewxzhteg Noh Voltage: 380 Rotational speed: 3000 Manufacturer : Glatt Model : VG-25 Year : 1993 Type: Universal high shear granulator / mixer Capacity : 25 Litres Useful capacity: 5 – 18 Litres Empty weight: 450 Kg Compressed air: 6 – 10 bar Jacketed: yes Water pressure: 2 – 6 bar Main mixer: 30 – 600 rpm Power : 5,5 KW Chopper: 300 – 3000 rpm Power : 1,5 KW Variable speed drive: electric x2 Liquid spraying : Watson Marlow peristaltic pump Discharge valve: Manual Mobile chassis: 4 wheels Video :