Used Copy Lathe for sale (5,838)

Condition: good (used), Year of construction: 1972, functionality: fully functional, Swing diameter over bed: 1,650 mm Swing diameter over support: 1,350 mm Turning length: 10,000 mm Bed width: 1,120 mm Spindle speed range: 1.4 - 280 rpm Max. torque, approx.: 20,000 Nm Workpiece weight between centers, max.: 10,000 kg With 1 steady rest / follow rest: 12,500 kg Equipment 3-axis digital readout: ACU RITE 1 steady rest 1 roller support Lsdjy Dtd Rjpfx Alnsaa

Condition: used, Year of construction: 2007, centre distance 200 mm max. workpiece diameter 25 mm Travel path of front cross slide 70 mm Travel path of rear cross slide 60 mm Travel path main slide 100 mm spindle turning speed range 1.180/1.830/2.750 U/min Number of tool holders 5 pos. Cutting device shaft size 12 mm shaft 16 mm tailstock quill diameter 30 mm tailstock quill stroke 90 mm Quill mount MK 2 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Lodpfxsy Dh U Rj Alnjaa Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 570 mm turning speeds 45 - 1800 U/min centre height 210 mm Lajdpfxjy Ehxxj Alnea spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 3,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Laedpfsxmd Sujx Alnja Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Year of construction: 2014, condition: used, Empty weight: 4.050 kg Laedoy D Ex Tspfx Alnea Dimensions (LxBxH): 299 x 178 x 275 cm Serial number: ML0032-000444 Swing diameter above bed: 651 mm Swing diameter above slide: 461 mm Recommended swivel diameter: 254 mm Max. Turning diameter: 370 mm Max. Turning length: 712 mm Hollow spindle: 76 mm X-axis displacement: 255 mm ( 185 + 70) Z-axis displacement: 790 mm Spindle speed: 3500 rpm Tool changer: 12 positions Rapid traverse (X/Z axis): 30 / 24 m/min Control system: Siemens Sinumerik 828D Weight: 4050 kg Dimensions (LxWxH): 2993x1785x2750 mm Equipped with: tool setting device, parts catcher, chip removal, oil mist extraction and documentation Online auction of well maintained metalworking machines (a.o. 2015 DOOSAN LYNX, 2015 DOOSAN DNM500-II, UNISIGN, GILDEMEISTER, MORI SEIKI, KELLENBERGER, OKUMA, SUNNEN etc.), grinders, (overhead) cranes and rolling stock (a.o. 2x HYSTER forklifts) originating from the recent bankruptcy of NPL Machinefabriek BV, manufacturer of gears and technical components for machine building, in Hengelo, The Netherlands. The online auction opens Wednesday 1 April and closes Thursday 23 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 17 April Pickup days are on: - Monday 4 May - Tuesday 5 May Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Empty weight: 4.980 kg Dimensions (LxBxH): 285 x 170 x 174 cm Serial number: 2021 Swing diameter over the bed: 530mm Swing diameter over the carriage: 340mm Distance between centers: 520mm Maximum turning diameter: 340mm Maximum turning length: 500mm Number of axes: 2 X-axis displacement: 520mm Z-axis displacement: 260mm Spindle type: JIS A2-6 Spindle speeds from/to: 45-4500rpm Hole spindle: 62mm Number of places on turret: 12 Lasdoy D Exyopfx Alnsa Control system: Okuma OPS7000L Equipped with: tool presetter, counter center, workpiece catcher preparation, 205mm 3-jaw kitagawa chuck, mayfran chip discharge, documentation. Dimensions LxWxH: 2850x1700x1745mm Machine weight: 4980kg Online auction of well maintained metalworking machines (a.o. 2015 DOOSAN LYNX, 2015 DOOSAN DNM500-II, UNISIGN, GILDEMEISTER, MORI SEIKI, KELLENBERGER, OKUMA, SUNNEN etc.), grinders, (overhead) cranes and rolling stock (a.o. 2x HYSTER forklifts) originating from the recent bankruptcy of NPL Machinefabriek BV, manufacturer of gears and technical components for machine building, in Hengelo, The Netherlands. The online auction opens Wednesday 1 April and closes Thursday 23 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 17 April Pickup days are on: - Monday 4 May - Tuesday 5 May Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, functionality: fully functional, Herbert 9C-30 Turret Lathe Type of chuck: 4 jaw Diameter over bed (Max): 762mm Diameter over cross slide (Max): 535mm Lajdpfx Aoyudgvelnja Diameter in front of cross slide (max) : 737mm Length between chuck face & turret face (Max): 1505mm Travel of turret: 1066mm Diameter of hole through spindle: 125mm

Condition: good (used), Year of construction: 1999, Ref. -No.: 10638 Manufacturer: TOS HULIN Type: SKA 12 CNC Year of construction: 1999 Type of control: CNC Control: Sinumerik 840 C Storage location: Halberstadt Country of origin: Czech Republic Turning Diameter: 1450 mm Turning Height: 1450 mm Tool Taper: SK50 Power Capacity: 60 kW Planar disk: 630 RPM Planar disk: Ø 1250 mm Ljdsy Ed Suopfx Alnjaa Head Magazine: 30 academic subject Plate magazine: 24 academic subject Further information: - Hydraulically operated power chuck - Drive for rotary tools - Third controlled C-axis - Heidenhain linear scales in X and Z - Chip conveyor and extraction system - Renishaw for tool control The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10623 Manufacturer: WEILER Type: E90 x 4500 Year of construction: 2000 Type of control: CNC Control: SIEMENS D1 - Zyklen Storage location: Halberstadt Country of origin: Germany Bed width: 600 mm Turning Length: 4500 mm Swing Diameter Over Bed Slide: 900 mm Spindle Bore: 128 mm Max. Torque: 6000 Nm Feed Capacity - Z: 20000 kN Feed Capacity - X: 20000 kN Rapid Speed: 10/5 RPM Tailstock Quill Diameter: 140 mm Tailstock Quill Stroke: 300 mm Lathe tool dimensions: 32 x 25 mm Front bearing diameter: 178 mm Circumferential diameter over facing slide: 530 mm Spindle head according to DIN 55027 (size): Gr. 11 Tailstock inner cone: MK 6 / 140 Type Machine length: 6900 mm Machine width: 2600 mm Machine Height: 2150 mm Weight Of The Machine Ca.: 10,5 t Further information: The machine can be viewed while powered up. Lasdpey Ed Rqofx Alnsa

Condition: good (used), Year of construction: 2024, Ref. -No.: 10605 Manufacturer: VDF WOHLENBERG Type: E 1000 Year of construction: 2024 Type of control: CNC Control: Sinumerik Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX Turning Diameter Over Bed: 1500 mm Lasdpey Ed Nasfx Alnja Turning Diameter Over Slide Rest: 1150 mm Centre Height: 750 mm Centre Distance: 9000 mm Faceplate Diameter: 1000 mm Spindle Bore: 80 mm Spindle Speed Min.: 1,4 - 280 RPM Turning diameter over cross slide: 800 mm Swing diameter over cross slide: 800 mm Space requirement: 13000 x 2650 x 2250 mm Power Capacity: 320 kW Weight Of The Machine Ca.: 8 t Max. turning diameter (in the offset): 2000 mm Size of the inner cone: metr. Kegel 1:20 quill cone: 80 O Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Ljdey Ed Ezopfx Alnsaa Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Lodpfx Ajy Ed Ebslnsaa Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning diameter: 3,600 mm, Table diameter: 3000 mm Max. turning diameter: 3600 mm Max. distance from table to tool holder: 2640 mm Ram cross-section: 240 x 240 mm Ram vertical travel: 1500 mm Slide horizontal travel left/right from table axis: 1930 / 2250 mm (+920 mm for tool change) Cross-slide travel: 1800 mm Table rotation speed: 200 rpm (2-speed gearbox) Lsdpfxoy Ep Dye Alnoaa Main spindle power: 80 kW Feed rate: up to 4000 mm/min Rapid traverse: 10,000 mm/min Max. workpiece weight: 30 tons Tool changer: 45 stations, 20 of which for Capto-C8 holders High-pressure coolant Overall dimensions: 10,570 x 8,445 x 7,375 mm Machine weight: 72,000 kg

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Laedpfsy Ed Ddex Alnea Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Lodey Ed Ayjpfx Alnjaa Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Lsdpfx Aey Ed Atslnjaa Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Lsdpfxey Edz Aj Alneaa Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 2004, control Heidenhain turning length 1.000 mm turning diameter over bed 500 mm turning dia. over slide 290 mm centre distance 1.500 mm x-axis 260 mm z-axis 1.000 mm spindle bore 70 mm spindle tunring speed 3.000 U/min spindle motor 12 kW Laedpfsy A Tdbjx Alnea In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, centre distance 1.270 mm turning diameter over bed 380 mm turning dia. over slide 230 mm centre height 190 mm spindle tunring speed 45 - 2.000 U/min bed width 200 mm Bed height 2.120 mm bed length 305 mm spindle bore 52 mm dimensions 2,70 x 1,00 x 1,60 m machine weight ab. 1.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 3-axis digital readout - 3-jaw chuck with internal and external grips - 2 live centers Lsdpfjy A Tc Rsx Alneaa - 1 fixed center - 4 quick-change tool post - 1 steady rest - Drill chuck - Machine feet Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, functionality: fully functional, spindle bore: 65 mm, turning diameter over bed slide: 520 mm, Lead and feed screw lathe Manufacturer: Heidenreich & Harbeck, Model: VDF Technical data Brand: Heidenreich & Harbeck Model: VDF Lasdpjy A H Akjfx Alnja Year of manufacture: unknown Control: conventional Centre distance: 1,500 mm Swing over bed: 520 mm Spindle bore: 65 mm Dimensions: L 3.60 x W 1.20 x H 1.50 m Machine weight: approx. 4 t Equipment - 2-axis digital readout - 1,500 mm scale not included All data without guarantee. A powered demonstration can be arranged at any time in our exhibition hall.

Condition: used, Year of construction: 1974, turning diameter over bed 1320 mm turning diameter over slide rest 820 mm turning length 4400 mm faceplate 1200 mm bed width 800 mm spindle passage 167 mm steady 480 control IMS total power requirement 76 kW Maschinen Nr.: 3987 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Ljdpfeyqu Szex Alnoaa than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), clearance 88mm Lajdpfx Alsw Rch Renoa diameter of rotation without chuck 1000mm with chuck 700mm machine dimensions: l2500mm x w1400mm x h1540 rpm 11.2 / 1000rpm automatic feed on X and Z axis

Condition: good (used), spindle bore 80 mm distance between centers 2500 mm weight approx. 4500 kg swing diameter 880 mm Lajdpfxew Rcgmj Alnsa 4.5/900 rpm length 490 cm height 145 cm width 150 cm digital readout on X and Z axes rapid traverse sold with 3-jaw chuck, 4-jaw chuck, and steady rest

Condition: good (used), Year of construction: 2014, Swing over bed 660mm, maximum machining diameter 380mm, maximum machining length 510mm, Ljdpfjyt H Ruox Alnsaa bar capacity 80mm, spindle speed 4,000rpm, 12 station turret, Mazatrol Smart control, swarf conveyor, & 3 jaw chuck

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, turning length: 1,330 mm, turning diameter: 393 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, quill stroke: 80 mm, turning diameter over top slide: 400 mm, spindle nose: A2-8, Doosan Puma CT250 CNC Lathe Model: CT250 Year: 2003 Control: FANUC 21It ‘X’ axis Travel: 240mm ‘Z’ axis Travel: 680mm Chuck Dia: 10” (250mm) Laedpsyli R Usfx Alnsa Swing over Bed: 570mm Swing over Saddle: 400mm Max. Turning Saddle: 255mm dia. Distance Between Centres: 700mm Spindle Speeds: 35 - 3500 RPM Machine with: Tool Pre setter Swarf Conveyor