Used Copy Setup for sale (1,552)

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Bjdpfxezcz Dns Ab Dell Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, ELUMATEC AS 170 – Single-spindle profiling machine Technical data Milling area, horizontal, against stop: 300 x 120 mm Milling area, horizontal, using template: 285 x 110 mm Milling spindle speed: 12,000 rpm Profile clamping range: 150 x 130 mm, adjustable up to 400 mm Stroke: 105 mm Electrical connection: 230/400 V, 3 ~, 50 Hz Power output: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions AS 170/00 Length: 780 mm Depth: 770 mm Height: 1,500 mm Weight: 200 kg Features Large milling area despite compact design Profiling using side stops or templates (1:1) Pneumatic, two-stage tracing device for different cutter diameters Blsdpfxoza Iife Ab Dsl Patented suspension of the tracing lever for precise milling Table height adjustment for profiles up to 400 mm high “Spindle Lock” for quick tool changes Pneumatic material clamping device Metering spray device

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Operating pressure (bar) 7 Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Immersion depth (mm) 200 Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Bjdpfxstqytio Ab Dell Weight (kg) approx. 350

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders Bsdpfx Aey S Aa Dob Doll 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Profile height max. 150 mm, profile width up to 300 mm Operation via switch and 2 hand levers

Year of construction: 1997, condition: used, SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel Bledjhz Dlbspfx Ab Del - volt. 380/50 - S/N 73 - CE rules (year 1997)

Condition: used, Year of construction: 2002, machine/vehicle number: 02010, SECOND-HAND COPYING ROUTING SHAPER FOR CORNER BLOCKS BERMAQ MOD. C.T.C. - CE RULES - Boring unit Bedpfx Aboua Azts Djll - Spindle moulder - S/N 02010 - Year 2002

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm Bodpfx Aeimwtrsb Doll - volt. 380/50 - s/n 06 - CE rules (year 1998)

Condition: used, SECOND-HAND HORIZONTAL COPYING LATHE WITH 4 SPINDLES BACCI - Spindles distance 180 MM - With cabin Blsdpfx Aswr Uknob Dol

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 170 mm, SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI TYPE T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle Bodpsx Rw Iyefx Ab Djll - Year 1994

Condition: used, Year of construction: 2000, functionality: fully functional, turning diameter: 170 mm, turning length: 1,250 mm, number of spindles: 4, Equipment: cabin, SECOND-HAND COPYING LATHE BACCI T4MO Bledpfox Rx D Nsx Ab Dsl - 4 holders for simultaneaus milling - Total weight 1.500 kg - Incl. soundproof cabin and extraction - Sanding belts: 4 - Band height: 180 mm - Contact roller Ø: 80 mm - Max. batten length: 1.250 mm - Milling machines standart power: 11kw

Condition: used, Year of construction: 2002, SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - Motor Hp 7,5 - Wheel diam. 840 mm. - Copying device - Max cutting length 1300 mm - Max cutting height 100 mm - Cutting angle +- 45° Bedpfxjmzbl Tj Ab Dsll - Waste conveyor belt SMA - S/N 08 - Year 2002

Condition: used, Year of construction: 1995, machine/vehicle number: 1/95, SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L Bledpfxjqmnidj Ab Dol - Double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - Kw 28 - Year 1995

Condition: good (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation Bjdpfx Abott Abxo Djll

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Swiveling support table from 0° to 180°, enabling 3-side machining in one setup. Bsdpfxjyuy S Is Ab Dell 2 selectable spindle speeds, 6,000 or 12,000 revolutions per minute, allowing both steel and aluminum profiles to be processed. 4 pneumatically controlled copying pins. Pneumatic material clamping. Minimum quantity lubrication system. Profile width: 30-120 mm. Profile height: 50-100 mm. Bar length: 490 - 3,000 mm. Weight: approx. 350 kg.

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: With stop: 290 × 100 mm With template: 230 × 70 mm Travel: 120 mm Bedpfoyxnx Ssx Ab Doll

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel KF 3 S type Copy Milling Machine Very good condition Blsdpfx Abov E Rw Sj Dol

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Copy milling machine URBAN MLA A23 with centering device, year 2005 Bodewhumhepfx Ab Dell Condition: very good

Condition: new, functionality: fully functional, turning diameter: 370 mm, Device for copying original parts or according to a template Stepless spindle speed control enables optimal adjustment to the workpiece High spindle rotational accuracy Robust cast iron construction ensures vibration-free operation High-quality belt drive provides optimal power transmission to the spindle Quick-action lever enables easy locking of the tailstock on the bed Digital spindle speed display included in the delivery scope Technical Specifications Centre distance: 1100 mm Swing over bed: 370 mm Copying turning diameter*: 160 mm Spindle speed min.: 500 rpm Spindle speed max.: 2000 rpm Bledpfx Aeytc R Rjb Dsl Number of speed ranges: stepless Spindle thread: M33x3.5 Tailstock taper: MK 2 Tailstock quill travel: 50 mm Copying length: 850 mm Motor power: 1.1 kW Motor power S1 100%: 0.75 kW Voltage: 400 V Dimensions - width: 1650 mm Dimensions - depth: 750 mm Dimensions - height: 1150 mm Weight approx.: 92 kg Scope of delivery 300 mm tool rest 150 mm faceplate Rotating live centre Drive centre Copying device Basic tools Base

Condition: excellent (used), Milling machine, copy router in very good working condition. Bjdpfx Aex Rrtdsb Djll

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, functionality: fully functional, - Used for lock handle, hinge, espagnolette slots and grooving in desired size on aluminum and plastic profiles - Copy assembly suitable for your operation - Various grooving features independent of the copy assembly with the help of the stop Blodpforcm D Dox Ab Dsl OPTIONS - Lower cabinet system - Pneumatic system

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of aluminum and PVC profiles. Bjdpfxjramz Hs Ab Dsll - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility of triple drilling copy milling cutter or grooving system working as one - High frequency motor (18000 rpm) - Right conveyor system (1 meter)

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 542 Alüminyum Kopya Freze Makinası Yüksek Frekanslı, - Conforms to CE standards - Used for handle, lock, etc. processing of all profiles Bjdpfora Nr Rex Ab Djll - It works comfortably with advanced technology motor support. - It has burr-free and comfortable processing speed - Water cooling system available - Pneumatic profile clamping system - High frequency motor (18000 rpm) OPTION - Right conveyor system (1 meter)

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J - Weight (kg): approx. 420 - Workable material: Bodpewzivdsfx Ab Doll KFB 353 = PVC and aluminum profiles

Condition: used, Copy head, copy head, copy device, copy lathe -Copy head for: lathe -without: hydraulic unit -Dimensions: 1100/170/H370 mm Blodpfx Abodl Smho Djl -Weight: 143 kg

Condition: used, Druckplattenbelichter - Plate Exposer O.M.S. COPYSTAR 4050 Blsdpev Am Rvofx Ab Djl Serial-No. 93-2023 Format / Size max. 400 x 500mm Voltage 230V AC - 2800W Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test