Used Cover Press for sale (17,398)

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Cpsdpjhmmfksfx Aa Now Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Codpfek S Htxjx Aa Njpw Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates Csdpfewki Apjx Aa Nepw - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Csdpfx Aaeyaqmge Nepw Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.

Condition: excellent (used), Year of construction: 1994, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V50 Year 1994 Technical data: Trumpf Cpedor D Sdgopfx Aa New Make: Trumpf Type: TrumaBend V50 Year of construction: 1994 Capacity: 50 t Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Voltage: 3 x 400V Rated current: 12.5 A Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment: Control unit - Control system: Delem DA-28 - Pneumatic die displacement - Hydraulic tool clamping top and bottom - Controlled axes: Y1, Y2, X, R - 3 manual stop fingers, pneumatically clampable - Tools: Punch set segmented, straight, 1050 mm, new Die V16, 30° 1000mm Die V08, 30° 1000mm Die V10, 30° 1000mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 1992, Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books Cedpfxjh U A Ibe Aa Nepw All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Just arrived, more pictures and a video will follow Bale Press Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Total connected load: 128 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Cpedpfx Aaoym Sqyj Njw Bale weight: 525 to 800 kg Transport dimensions: approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data is based on manufacturer information. We assume no liability for the stated information or possible errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspection by appointment possible. Sale takes place ex works, advance payment required, without warranty or guarantee.

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm Codoxu Nw Sepfx Aa Nspw stroke 8-100 mm no. of strokes 60-130 Hub/min ram - range of adjustment 80 mm weight of the machine ca. 4,3 t Pressensicherheitssteuerung Pilz fehlerhaft!

Condition: used, Year of construction: 1976, total length: 2,200 mm, total width: 1,200 mm, total height: 2,060 mm, Weight: 2.000 kg - Year: 1976 - Documentation available: No - CE certificate present: No - Serial number: 6720 - Drive system: Conventional Cpedpfxjylvhgs Aa Nsw - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 50 - Max. working width [mm]: 2050 - Column gap [mm]: 1600 - Backgauge depth [mm]: 700 - Crowning system: None - Punch holder: Fixed - Tools included: Yes - Transport dimensions: 2200mm x 1200mm x 2060mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, Year of construction: 2014, controller manufacturer: Amada, controller model: Amada AB-Pad, stroke length: 200 mm, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Cedpfxeynbfvo Aa Nspw Number of controlled axes: 4 Length (mm): 4580 Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: ready for operation (used), Year of construction: 1998, General Data Machine weight 16500 kg Control Unit Brand SIEMENS This BURKLE BTF 1628 laminating press was manufactured in 1998. It features a max panel size of 1250x2550 mm, panel thickness range of 6-35 mm, and a heating plate dimension of 1600x2800 mm. Equipped with a Siemens control system and a total power requirement of 38 kW. Consider the opportunity to buy this BURKLE BTF 1628 laminating press. Contact us for more information. Application Types Cpedpfx Ajx D Ifmja New Pressing / Laminating

Condition: ready for operation (used), Year of construction: 2003, This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information. Cpsdox Tkazjpfx Aa New Application Types Pressing / Laminating

Year of construction: 2016, condition: ready for operation (used), This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine. Application Types Cpsdpfxjx D Ncae Aa New Stamping

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Cpsdjx D E Avopfx Aa Nsw Pressing / Laminating

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of manufacture 2000 Technical specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Cjdpfx Aaox Tflfs Nspw Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: fully automatic, 4-fold Throughput rate at: 35 kg/m³: approx. 9.5 t/h 60 kg/m³: approx. 16.5 t/h 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: paper, cardboard, film The baler is in good condition and has been checked and tested. A demonstration video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, ELECTRONIC RETROFIT IN 2001 Maximum press force 2000 kN That equals 200 tons Maximum working length 3100 mm Maximum stroke 400 mm Throat depth 250 mm Machine weight 16,600 kg Electrical data Operating voltage 400 V, 50 Hz Control voltage 24 V DC Power Main motor 22 kW Total connected load 28 kW Fuse rating 100 A Hydraulic oil specification HLP46 or HLP68 Cpjdpfxjyf Ibxo Aa Nsw HM46 or HM68 his machine is equipped with CNC numerical bending control. Bending method 3 point bending, Normal mode Measurement and positioning axes visible in control Y1 and Y2 for ram positioning X axis for backgauge depth Z axis for backgauge lateral positioning R axis for backgauge height Typical positioning accuracy for this class of machine Backgauge repeatability approx ±0.05 mm Bending angle accuracy depends on tooling and material, typically ±0.3 to ±0.5 degrees The control calculates bend angles based on Material thickness Tool geometry Press force Bend allowance Main intention of use The primary purpose of this machine is precision bending of sheet metal parts. Typical operations Straight bends Box shapes U bends Complex multi step formed parts It is designed for medium to heavy gauge sheet metal over long bending lengths.

Condition: used, Year of construction: 1986, total height: 2,900 mm, total width: 1,450 mm, total length: 1,500 mm, Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 Cjdpfx Aoylb Edoa Nspw - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2021, condition: as good as new (ex-display), It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Cpjdpfxsigg E Hs Aa Njw Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T 200 L tank Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: new, Year of construction: 2021, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit Codpjgrki Sefx Aa Njpw The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: new, Year of construction: 2018, machine/vehicle number: DF0230, pressure:200 t Cpsdpfx Asfxyklja Njw distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

Condition: new, machine/vehicle number: DF0177, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm Cpjdpfx Aasfxyhij Nsw power capacity:25 kW work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l :entfällt ? :entfällt ? :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ?

Condition: used, Year of construction: 1998, For sale is a used spotting press from manufacturer Reis, featuring an adjustable pressing force of up to 100 tons. This 4-column press offers a table size of 1600 × 1300 mm, a maximum open height of 950 mm, and is equipped with an ejector in the table, making it particularly suitable for spotting, adjustment, and toolmaking work in mold and die construction. ##### Technical Data & Information: Spotting Press – REIS TUS 80-100 #### General Specifications - Designation: Spotting Press - Manufacturer: REIS - Type: TUS 80-100 - Design: 4-column press - Year of manufacture: 1998 - Pressing force: 26–100 tons (adjustable) - Maximum return force: 45 tons - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Max. open height: 950 mm - Overall dimensions (W x D x H): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm #### Hydraulic System - Hydraulic pump: Rexroth SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Max. operating pressure: 200 bar - Pressure accuracy: ±5 bar - Tank oil volume: 215 L - Hydraulic oil: HLP 36 #### Features / Equipment - 180° tiltable ram plate (up to 3 t) - Table ejector (3.5 t / 130 mm) - Oil coupling sockets for core pullers - Digital measuring system - Material feed through ram plate possible (injection molding) - Speed increase #### Control System - Operator panel - Control system: Siemens / Pilz - Functions: - Ram up / down - Tilt ram plate - Extend table - Operate ejector Cpedpfx Aaexd Tiqj Njw - Adjust pressing force - Control core pull / oil couplings #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 7.5 kW - Total connected load: approx. 10 kW (spotting press, tryout press, tool adjustment press, toolmaking press, 4-column press, hydraulic press, REIS press, toolmaking spotting press)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 9,000 h, bending force (max.): 100 t, working width: 3,100 mm, stroke length: 350 mm, overall weight: 8,300 kg, Equipment: CE marking, A TRUMPF TruBend 3100 press brake from 2017, ready for immediate use and in like-new condition. This powerful and reliable machine is ideal for professional sheet metal work, delivering excellent precision and performance. The machine offers a maximum press force of 100 tons and is equipped with an advanced control system featuring graphical visualization. The machine has only 9,000 operating hours. Added benefit: With the purchase of this machine, one week of training at our facility is possible, ensuring you can start immediately and work optimally. Manufacturer: TRUMPF Cjdpfxsybax Us Aa Nepw Model: TruBend 3100 Year of manufacture: 2017 For more information or if you have any questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Csdpjyngw Dsfx Aa Njpw Year of manufacture: 2010 Press force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening size: 119.5 cm × 65 cm Condition: Very good! Inspected and fully functional. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires). Need more bundles of tying wire? Request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are warmly welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us ample time to inform you properly and show you the most suitable machines. We are happy to assist you! Waste baler | Paper baler | Cardboard baler | Plastic baler | Waste compactor | Recycling | Textile baler | Waste processing

Condition: good (used), Year of construction: 2012, functionality: fully functional, Infeed Baling press Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year: 2012 Drive: 30 kW Press force: 50 t Feed opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Max. fill volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Materials: paper, cardboard, film, PET bottles Please note: All technical data is based on the manufacturer's information. We assume no liability for the stated specifications or any possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works against advance payment, without warranty or guarantee. Cpodpsyma Rzsfx Aa New