Used Joos Veneer Press for sale (26)

Condition: used, Year of construction: 1987, Pressing area: 2550 mm x 1250 mm Opening: 400 mm Hedpfx Aeyt E Rmjcrsl Heating: electric Plate surface: aluminium – anodized Emergency stop: yes, foot bar Pressing force: 80 t Number of cylinders: 4 Power consumption: 32.6 A Machine length: 3000 mm Machine width: 1500 mm Weight: 4000 kg

Condition: used, Year of construction: 1989, Pressing area: 2500 mm x 1100 mm Opening: 400 mm Heating: electric Plate surface: Aluminium, gold anodized Emergency stop: yes Pressing force: 65 t Number of cylinders: 4 Current consumption: 22 A Hodpfxjyl Tino Acrol Machine length: 3000 mm Machine width: 1300 mm Weight: 3000 kg

Condition: used, Year of construction: 1976, Pressing area: 2500mm x 1250mm Opening: 360mm Top platen heating: electric Bottom platen heating: defective Platen surface: aluminum, anodized Pressing force: 90t Number of cylinders: 4 Power consumption: approx. 33A Machine length: 3000mm Machine width: 1500mm Hjdpfx Acex Edl Ejrsl Weight: 4000kg

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Hedpfxoy A Hkbj Acrol Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: good (used), Year of construction: 1982, Plate dimensions 2200 x 1100 mm Daylight opening 350 mm Hodpfjyyqnxex Acrel Number of daylights 1 St. Heating elektrisch Total pressure 65 to Motor output 1,1 kW Dimensions (L/W/H) 2540 x 1280 x 1900 mm weight of the machine ca. 2500 kg

Condition: used, used, good condition Manufacturer Joos Model HP65/2 1 level Plate size approx. 2500 x 110 mm Opening width approx. 360 mm Side guide Electric heating Aluminium plates Piston diameter 80 mm 4 lower pistons Space requirement approx. 2900 x 1300 x 1900 mm Hjdpfxsyu U Eve Acrel Weight approx. 3200 kg Total connected load 15.4 kW Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Condition: used, used, in good condition Manufacturer: Joos Model: HP65/2 Machine no.: 79/9 510 1 deck Cover plates - natural aluminum GS tested Panel size: 2500 x 1100 mm Opening width approx. 360 mm Tip control Safety device: foot rail - shutdown Side guide Electric heating Hodpfoyu U D Sox Acrel Piston diameter: 80 mm Lower pistons: 4 units Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Stock location: 97447 Gerolzhofen, loaded free, unpacked Delivery in current condition as inspected, without guarantee or warranty

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN Hjdpfx Aet Eq E Socrsl 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: ready for operation (used), electrically heated Press dimensions 2,200 x 1,100 mm 4 press cylinders, diameter 80 mm Temperature of upper and lower plate separately adjustable Hsdpfsygg Imsx Acrol

Condition: used, Year of construction: 1987, used, top condition, low hours Manufacturer Bürkle / Joos HP 60 Completely overhauled by Joos in 1987, safety interlock Model S60/250/130 Year of manufacture 1987 Machine no. 63/310777 1 deck Plate size: 2500 x 1300 mm Opening height: 290 mm Tip control Hodpfxjythdpo Acrsl Safety cable underneath Electric heating Max. specific pressing pressure 2.5 kg/cm² Bonded aluminium plates Piston diameter: 60 mm Bottom piston & piece Space requirement approx. 3000 x 1500 x 1800 mm Weight approx. 3000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as inspected, in current condition, without warranty or guarantee

Condition: excellent (used), Shelf length: 250 cm Hodpfexgnp Djx Acrjl Width: 130 cm Four actuators

Condition: used, used Manufacturer Joos Machine no. 790 1 level Plate size approx. 2200 mm x 1100 mm Opening width approx. 280 mm Aluminum plates Piston diameter 80 mm Space requirement approx. 2800 mm x 1300 mm x 1850 mm Weight approx. 3000 kg Total connected load 13.2 kW heating power Hedpfx Aowrtlqocrel Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without guarantee and warranty

Condition: used, with new Mylar film used, in good condition Brand: Joos Year of manufacture: 1981 Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Side guide Electric heating Max. pressing force 90 t Aluminium plates Piston diameter 80 mm Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Hjdpfjww Nd Hex Acrol Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 800 kN Setting range 10 – 100 % Total pressing surface 3100 x 1300 mm Specific pressure at full charge 2,0 daN/cm² (kg/cm²) 6 cylinders 80 mm diameter 400 mm stroke Hodpfx Acofhqhderel Operating hydraulic pressure 265 bar Daylight height 400 mm Heating platens: Electric heating platen 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: as good as new (ex-display), - pressing force: 700 kN - pressing surface: 2500 x 1250 mm Hsdpfxjwazno Acrel - medium heated (water) with heating unit max. temperature 85 °C - incl. Joos-A.B.S.-Safety-System to protect the heating platens in case of incorrect loading or forgotten parts

Condition: used, Used machine Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 Hsdpowpm I Hsfx Acrjl - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, Joos vacuum table with silicone membrane Universally applicable press, veneer press for veneering, laminating, form bonding, contour veneering, edge banding, etc. With this press, you can, with certain limitations, forgo a hydraulic veneer press. New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral-based materials. Internal frame dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm Working height approx. 900 mm Becker VT4.40 vacuum pump, 400V, 1.5 kW with 40 m³/h output and two 200-liter vacuum tanks, ensuring comfortable operation and fast evacuation. Electronic vacuum pressure switch, so the pump switches off when the set vacuum is reached and does not run continuously. Mobile on four swivel castors, lockable Frame easily folds open, secured with two latches Hsdpfxey Hl Hpj Acrsl Double frame for quick membrane replacement. A new silicone membrane is currently installed. Quick vacuum distribution via grooved base plate CE marking Original paintwork, some spots touched up The silicone membrane and base plate have been renewed, machine is immediately operational Dimensions approx. 3100 x 1550 x 1020 mm (LxWxH). Weight approx. 550 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this supplier."

Condition: used, Year of construction: 2008, total length: 2,800 mm, total width: 800 mm, total height: 1,600 mm, Empty weight: 500 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Serial number: 1917295 - Min. working width [mm]: 400 - Max. working width [mm]: 1630 - Max. passage height [mm]: 100 - Voltage [V]: 400 - Current consumption [A]: 16 - Fuse [A]: 20 - Power [kW]: 5.2 - Transport dimensions: 2800mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hedpfx Aoytfr Recrel VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1975, functionality: fully functional, Veneer press Hjdpex Akuzefx Acrjl - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5,500 kg - Electric heated plates, no dents - Pressing chamber height: 400 mm - 6 cylinders - Rack and pinion guide - with tear-off cord - Pressing chamber height: 400 mm - 6 cylinders - Rack and pinion guide - 27 kW, 380 Volt - Piston diameter: 80 mm Transport possible at additional cost! Shipping possible at additional cost!

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 700 kN Setting range 10 – 100 % Total pressing surface 2500 x 1250 mm Specific pressure at full charge 2,2 daN/cm² (kg/cm²) 4 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 348 bar Daylight height 400 mm Heating platens: Hodpfxjfhqhas Acrsl Electric heating platen 2500 x 1250 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: as good as new (ex-display), Technical specifications: Working surface 2800 x 1300 mm Maximum mould height 600 mm Vacuum pump 40 m³/h Vacuum vessel 2 x 200 l Membrane Rubber Configuration: Hjdpjb Awz Hefx Acrsl - Oil free rotary valve vacuum pump (sub frame) - Vacuum vessel for fast vacuum ejection (sub frame) - Clamped membrane - Double frame for membrane clamping - Separate rubber sealing strip - Water proof robust working plate with cross milling - Vacuum height adjustable by means of electronic switch Control: The operating elements are integrated into the switch cabinet. The switch cabinet is installed into the base frame, including cable and 16 Amp. Cekon plug.

Condition: as good as new (ex-display), machine/vehicle number: 1966190, Heating table HT3110 For tempering thermoplastic materials such as mineral plastics, acrylics, etc. to the required processing temperatures. Hedpfxo T Sv Sj Acrol Torsion-resistant base frame consisting of welded steel profiles. Movable on four rollers. Upper folding frame at the rear side rotatably mounted in a solid spherical bearing. Two aluminium heating plates black anodized maximum operating temperature 180 C. Temperature control by means of electronic controller in separate switch cabinet in the base of the table. The swivel movement is actuated by pneumatic cylinders located on the side. Four adjusting screws on the side for setting the material thickness.

Year of construction: 2023, condition: as good as new (ex-display), Up-stroke construction pressing force 300 kN Hjdpjkuz T Uefx Acrjl pressing surface 300 x 300 mm specific force 3,3 N/mm² opening 200 mm heating platen as solid steel plate electrical heated up to 300°C (570 °F) control Siemens S7-1200 with 12" Touchpanel mechanical safety door data collection

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm Hjdpfj T R Nhsx Acrel total pressing force 900 KN (=80 MP) specific pressure force 2,6 daN/cm² (kp/cm²) 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar goldclour anodized heating platens, tooth rack guidance

Condition: excellent (used), Year of construction: 2008, For sale: Hydraulic through-feed press JOOS DLP 240/OK Machine type: Hydraulic through-feed press with automatic feeding and unloading of elements. Application: Designed for coating flat panel materials of uniform thickness using coating material under elevated temperature. Basic data: Manufacturer: JOOS Model: DLP 240/OK Year of manufacture: 2008 Operating voltage: 400 V / 50 Hz Power consumption: 55.5 kW Hodsyc Eukspfx Acrjl Hydraulic cylinders: 8 × 125 mm + 2 × 40 mm Operating pressure: 245 bar Pressing surface: 4200 × 1400 mm (L × W) Total pressing force: 2400 kN Condition: very good Documentation: complete Important note: The machine does NOT have a control program. TAG: hydraulic press, through-feed press, industrial press, coating press, panel processing machine, production line equipment, industrial machinery, JOOS, Siempelkamp, Orma, Italpresse, Dieffenbacher, Bürkle, Langzauner