Used Crank for sale (654)

Condition: new, empty load weight: 842 kg, maximum load weight: 658 kg, overall weight: 1,500 kg, loading space length: 3,970 mm, loading space width: 1,960 mm, loading space height: 2,300 mm, loading space volume: 18.4 m³, color: black, construction height: 2,940 mm, working width: 2,050 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, sheet steel sandwich body 40mm walls, braked, PVC floor, sales hatch + bag storage, gas door, * IMMEDIATELY AVAILABLE * Sheet steel sandwich body 40mm walls, braked, PVC floor, sales hatch + bag storage, gas door TECHNICAL DATA - Vehicle type: Box trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Interior dimensions (L x W x H): 397 x 196 x 230 cm - Exterior dimensions (L x W x H): 552 x 205 x 294 cm - Floor loading height: 55 cm - Perm. Total weight: 1,500 kg - Unladen weight: 842 kg - Payload: 658 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, standard with clamp - 100km/h approval: Optional, can be retrofitted Vehicle body: - Brake: Yes - Number of axles: 1 - Floor: Wooden floor - Walls material: Sheet steel sandwich insulated 40mm - Roof material: Sheet steel sandwich insulated 40mm - Colour: Black - Tipping / lowering function: None - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar - Mudguards: Plastic - Side door: No - Side door: Yes - Rear doors / tailgate: Yes, front - Rear door / tailgate material: - - Tailgate load: - - Rear clearance: - - Locks box body: Standard door handle - Drive-on angle: - - Supports: 4x scissor supports, rotatable - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Optional, can be retrofitted - Rear lighting: Incandescent bulbs, lamps mounted on the rear wall - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - Single-axle - KNOTT overrun hitch - Floor plate made of multiplex - Side walls made of very solid sheet steel sandwich, 40 mm thick - Sales flap on the right side + bag rack - PVC covering on the floor - Door in front wall, lockable from the inside and outside - Step on the drawbar - Support wheel with clamp - 4x scissor supports mounted incl. crank automatic reversing system - plastic mudguards - 13-pin plug - reversing lights - large safety lights - integrated rear fog light - registration papers: COC papers Accessories can be retrofitted at extra cost - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - 230V or 400V supply line incl. sub-distribution - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Fpodpfou Skwpsx Aa Esd

Condition: new, empty load weight: 860 kg, maximum load weight: 1,740 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,530 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3617-26-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - Initial registration: without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 360 x 170 x 190 cm - External dimensions (LxWxH): 542 x 229 x 253 cm - Floor loading height: 53 cm - Perm. Total weight: 2,600 kg - Unladen weight: 860 kg - Payload: 1,740 kg - Chassis: Low loader (wheels next to the body) - Tires: 185/65R14 - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100km/h approval: Optional EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Walls material: Sandwich (sheet steel/foam 40mm/sheet steel) - Roof material: Sandwich (sheet steel/foam 40mm/sheet steel) - Color: Grey - Number of pallet spaces: 6 - Tipping / lowering function: Without - Overrun device/brake: ALKO - Frame/chassis: Aluminium substructure - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, U-profile - Mudguards: Plastic mudguards - Side door: No - Cooling unit: GOVI Arktik 1600 N - Temp. Control range: +2 C to +10 C - Cooling capacity: 1800 W - Rear doors / tailgate: Rear doors - Locks for box body: Press lever lock - Drive-on angle: - - Supports: Yes - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Yes - Rear lighting: Incandescent bulbs, lamps recessed in rear frame - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum control of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing light - Automatic reverse drive - Plastic mudguards - 13-pin plug - Large reversing light - Large reversing light - Large reversing light - Large reversing light Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar Fpsdpfxeu Hrvps Aa Eod

Condition: new, * IMMEDIATELY AVAILABLE * Includes 2 sales flaps, customer entrance door, 100 km/h road approval, 4 support stands TECHNICAL DATA • Brand: Blyss • Model: H25522HTN • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: None • TÜV (roadworthiness test)/main inspection: 2 years from first registration • Internal dimensions (L x W x H): 520 x 223 x 230 cm Fedpfsyacg Eex Aa Eopd • External dimensions (L x W x H): 683 x 236 x 277 cm • Perm. gross weight: 2,500 kg • Unladen weight: 900 kg • Payload: 1,600 kg • Chassis: High loader (wheels mounted under the body) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h road approval: Yes DESCRIPTION • Robust V-drawbar, hot-dip galvanized • Single-axle • Multiplex flooring • Strong 25 mm GRP sandwich sidewalls • 2x sales flaps on right side • PVC floor covering • Additional sales flap at rear • Door in front wall, lockable from inside and outside • Step on drawbar • Jockey wheel with clamping bracket • 4 scissor support stands mounted, incl. crank handle • Maintenance-free KNOTT rubber torsion axle • Shock absorbers incl. 100 km/h type approval • Automatic reversing system • KNOTT overrun device and parking brake • Plastic mudguards • 13-pin plug • Reversing lights • High-capacity safety lighting • Integrated rear fog light New vehicle with warranty and full roadworthiness certification. ————— - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or transit plates (Germany) can be provided. - Export license plates with customs registration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg, Germany Over 1,200 trailers immediately available from stock! For over 30 years, we are your authorised dealer and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to prior sale, errors, and changes -

Condition: new, * IMMEDIATELY AVAILABLE * Including Electric Winch / Removable Container / For Drums up to d=280 cm and b=165 cm Fpodoyachpspfx Aa Eod TECHNICAL DATA • Brand: Blyss • Model: KTT 35 V2L • Vehicle type: Cable Drum Trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 165 x 280 cm • External dimensions (LxWxH): 489 x 254 x 214 cm • Loading height (floor): 0 cm • Perm. gross weight: 3,500 kg • Unladen weight: 675 kg • Payload: 2,825 kg • Chassis: Low loader (wheels beside the superstructure) • Tyres: 185R14C • Suspension: KNOTT rubber spring axle • Jockey wheel: Yes • 100 km/h type approval: Optional, retrofittable DESCRIPTION • Designed for cable drums up to a diameter of 2,800 mm and a width of 1,650 mm • With 2m³ container for cable drum trailer • Standard pipe mount approx. 60 mm • 2x plastic adapters for pipes with 80 mm mount • Torsion-resistant chassis with heavy-duty mounting frame, hot-dip galvanized in immersion bath • Easy operation of the mounting frame with or without cable drum • Barrier-free loading of the cable drum and container mounting • Play-free bearing and secure fixing of the drum • Electric winch for loading cable drums • Battery installed in box • Heavy-duty jockey wheel mount and rear support • Stable telescopic crank stands at rear • Very robust welded steel frame • Frame completely hot-dip galvanized • Steel mudguards • Reverse automatic system • KNOTT overrun device and parking brake • 13-pin plug • Reversing lights • Large-dimension safety lighting • Integrated rear fog light • Rear frame with recessed LED lighting • Automatic jockey wheel • ____ • Container data: • Width bottom 116 cm, • Width top 133 cm, • Length bottom 87 cm, • Length top 182 cm • Height of container 100 cm • Container weight: approx. 260 kg • Trough colour: blue RAL 5002 • Pivoting tailgate, suitable for driving over and removable • Tailgate can also be used as a drive-on ramp, e.g. for wheelbarrows • Additional net hooks for tarpaulin or nets ensure optimal load securing • Container capacity approx. 2 m³ New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration documents can be sent in advance or temporary licence plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been specialist dealers and service workshops for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, omissions and prior sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Including 2x sales hatches, entrance door, 100 km/h approval, 4 support legs TECHNICAL DATA • Brand: Blyss • Model: H18422HN • Vehicle type: Sales trailer • Vehicle condition: New vehicle Fpsdpfx Aeyacgxsa Eod • TÜV/MOT: 2 years new from first registration • 2 years from first registration • Internal dimensions (LxWxH): 420 x 223 x 230 cm • External dimensions (LxWxH): 583 x 239 x 277 cm • Loading height: 55 cm • Perm. total weight: 1,800 kg • Unladen weight: 780 kg • Payload: 1,020 kg • Chassis: Low loader (wheels mounted beside the body) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Robust V-drawbar, hot-dip galvanized by immersion • Single axle • Multiplex flooring • Sidewalls made of sturdy 25 mm GFRP sandwich panels • Sales hatch on right side • PVC flooring • Additional sales hatch at rear • Front wall door, lockable from inside and outside • Non-slip platform on drawbar • Jockey wheel with clamp • 4x scissor support legs mounted incl. crank handle • Maintenance-free KNOTT rubber torsion axles • Automatic reversing function • KNOTT overrun brake system and parking brake • Plastic mudguards • 13-pin connector • Reversing lights • High-capacity safety lighting • Integrated rear fog light New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration documents can be sent in advance or temporary transit plates (Germany) can be provided. - Export plates with customs clearance available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available in stock! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealers & service workshop for over 30 years. - Subject to errors, prior sale, and alterations -

Condition: new, * IMMEDIATELY AVAILABLE * including hand winch – suitable for drums up to d=280cm and b=160cm TECHNICAL DATA • Brand: Blyss • Model: KTT 27 • Vehicle type: Cable drum trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV / General inspection: 2 years from first registration • Internal dimensions (LxWxH): 280 x 160 x 0 cm • External dimensions (LxWxH): 470 x 234 x 218 cm • Loading height of platform: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 711 kg • Payload: 2,789 kg • Chassis: low-loader (wheels positioned beside the platform) • Tyres: 185R14C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable drums up to a diameter of 2,800 mm and a width of 1,600 mm • Standard pipe receptacle • Torsion-resistant chassis with robust mounting frame, fully hot-dip galvanized • Easy handling of the mounting frame with or without cable drum • Barrier-free insertion of the cable drum • Play-free bearing and secure fixing of the drum • Heavy-duty jockey wheel mounting and rear support • Sturdy telescopic crank supports, rear and front Fedpfoyachisx Aa Espd • Includes robust, maintenance-free manual hand winch • Highly stable welded steel frame • Complete frame hot-dip galvanized • Plastic mudguards • Automatic reversing system • KNOTT overrun hitch and parking brake • 13-pin plug • Reversing light • Large dimensioned safety lighting • Integrated rear fog lamp • LED lighting fitted flush in rear frame • Number plate bracket 340x200mm New vehicle with warranty and TÜV (inspection). ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be shipped in advance, or we can provide temporary (German) registration plates. - Export plates with customs declaration available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been a specialist dealer and workshop for over 30 years representing Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, changes and prior sale -

Condition: new, empty load weight: 802 kg, maximum load weight: 2,698 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,550 mm, loading space width: 220 mm, loading space height: 300 mm, loading space volume: 0.3 m³, color: silver, construction height: 940 mm, working width: 2,260 mm, Hydraulics, automatic reversing, hot-dip galvanized, unbraked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 802 kg - Payload: 2.698 kg - Internal dimensions: 455 x 220 x 30 cm (L x W x H) - External dimensions: 611 x 226 x 94 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13 steel rim - Brake: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h: Includes standard equipment: - Designed side wall hinges for very easy attachment of a cargo net - 30 cm high aluminum side walls with robust built-in locks - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the ramps, - double-walled anodized aluminium drop sides - all drop sides foldable and removable - removable steel corner stanchions - multiplex wooden floor with anti-slip surface - very sturdy welded steel frame - frame completely hot-dip galvanized - many cross members for high point loading - additional longitudinal struts welded in throughout - all cross and longitudinal members rest on the floor - 8 lashing brackets recessed inside the side edge (1000DaN / kg) TÜV certified! - Lashing hooks on hinged lower sections - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy eccentric locks - Reinforced, sturdy bolted V-drawbar - 13-pin plug - Large dimensioned safety lighting Large dimensioned safety lighting - Lighting recessed in the rear frame, integrated rear fog light - Automatic support wheel in the middle Special equipment included in the price : - Low chassis with 195/50R13C tires, loading floor height approx. 64cm - Parabolic suspension incl. shock absorber for 100km/h mounted instead of rubber-sprung axles - Parabolic suspension axle with shock absorber for absolute driving comfort! Optional accessories available, some of which can be seen in the pictures: - 2 pcs. Telescopic rear supports 90 degrees rotatable incl. crank - Tarpaulin + bows - Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Fedpfxeu Sktdo Aa Espd

Condition: new, * IMMEDIATE AVAILABILITY * Including 2x sales flaps, guest door, 100 km/h highway approval, 4 support legs TECHNICAL DATA • Brand: Blyss • Model: H15252HN • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: Not yet registered • TÜV/HU inspection: 2 years from first registration • Internal dimensions (LxWxH): 250 x 203 x 230 cm • External dimensions (LxWxH): 414 x 215 x 276 cm • Permissible gross weight: 1,500 kg • Unladen weight: 580 kg • Payload: 920 kg • Chassis: High-loader (wheels positioned under the body) • Tires: 195/50R13C • Axle: KNOTT rubber spring axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Robust V-drawbar, hot-dip galvanized • Single axle • Flooring made of multiplex • Sidewalls made of sturdy GFRP sandwich panels, 25 mm thick • Side sales flap right • PVC floor covering • Additional rear sales flap • Door in front wall, lockable from inside and outside • Step on the drawbar • Jockey wheel with clamping bracket • 4x scissor-type support legs installed incl. crank handle • Maintenance-free KNOTT rubber spring axle • Shock absorbers including 100 km/h type approval • Reverse-drive automatic system • KNOTT overrun brake and parking brake • Plastic mudguards • 13-pin plug • Reversing light • Large-size safety lighting Fpsdpfex U Euisx Aa Esd • Integrated rear fog lamp New vehicle with warranty and TÜV (roadworthiness certificate). ————— - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle documents can be sent in advance, or German export/transfer licence plates can be provided - Export plates including customs clearance available Descriptions and images are copyrighted!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available at our site! We have been a specialist dealer and service workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, changes, and prior sale -

Condition: new, empty load weight: 1,017 kg, maximum load weight: 2,483 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 6,050 mm, loading space width: 2,200 mm, loading space height: 300 mm, loading space volume: 4 m³, color: silver, construction height: 950 mm, working width: 2,260 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Hapert Trailers - Model: Azure H-3 - Vehicle type: High loader - Vehicle condition: New vehicle - Initial registration: without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 605 x 220 x 30 cm - External dimensions (L x W x H): 767 x 226 x 95 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,017 kg - Payload: 2,483 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT parabolic suspension + 100 km/h - Support wheel: Yes, automatic - 100 km/h approval: Yes VEHICLE CONSTRUCTION: - Brake: Yes - Number of axles: 3 - Floor: Wooden floor - Drop sides: Double-walled anodized aluminium - Drop side height: 30 cm - Drop sides foldable: 4-sided - Drop sides removable: 4-sided - Drop side hinges: 6 side / 3 front + rear, welded on - Corner stanchions removable: Yes, all removable - Locks: Eccentric locks, internal - Number of pallet spaces: 8 - Tipping / lowering function: Without - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Drawbar length: 156 cm - Mudguards: Plastic mudguards - Superstructures / attachments: Optional, attachable - Ramp shaft: prepared - Ramps/ramp flap: Optional - Ramp type: - - Load ramps: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 8 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall elevation - Sturdy eccentric locks - Screen-printed wooden floor, continuous without impact, slip-resistant and waterproof - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options for attaching tarpaulin frames, grid attachments, drop side attachments or front wall elevation. hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts welded in throughout - all cross and longitudinal beams rest on the floor - 8 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear for easier attachment of the ramps - Cargo net hooks on the lower hinge sections - Parabolic spring axle from KNOTT - Wheel shock absorbers for 100 km/h fitted - Parabolic spring axle for absolute driving comfort! - Automatic reverse drive - KNOTT overrun hitch and parking brake - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel Accessories optionally available at extra charge: - 2 pcs. telescopic rear supports rotatable 90 degrees incl. crank - retractable drive-on ramps - ramp shaft under the loading area - tarpaulin + bows - supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions Fedpfx Aeu Skt Dea Eepd

Condition: new, incl. 3x sales flaps, gas door, 100 km/h approval, 4 supports TECHNICAL DATA • Brand: Blyss • Model: H27622HTN • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: No initial registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 620 x 223 x 230 cm • External dimensions (LxWxH): 787 x 236 x 280 cm • Permissible total weight: 2,700 kg • Unladen weight: 1,040 kg • Payload: 1,660 kg • Chassis: High-loader (wheels under the body) • Tyres: 195/50R13C • Suspension: KNOTT rubber spring axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Robust V-drawbar, hot-dip galvanized in immersion bath • Single-axle • Floor made of multiplex board • Side walls made of solid 25 mm GRP sandwich panels • 2x sales flap on right side • PVC floor covering • Additional sales flap at the rear • Door in the front wall, lockable from inside and outside • Step on drawbar Fpedpfxsx Srrce Aa Eod • Jockey wheel with clamping bracket • 4x scissor supports mounted incl. crank handle • Maintenance-free rubber spring axle by KNOTT • Shock absorbers incl. 100 km/h registration • Reverse automatic mechanism • KNOTT overrun device and parking brake • Plastic mudguards • 13-pin plug • Reversing spotlight • Large scale safety lighting • Integrated rear fog light New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided - Export license plates with customs clearance available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been a specialist dealer and service workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes, and prior sale excepted -

Condition: new, empty load weight: 995 kg, maximum load weight: 2,005 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,560 mm, working width: 2,290 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3417-30-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): 340 x 175 x 190 cm - Exterior dimensions (LxWxH): 542 x 229 x 256 cm - Loading height of floor: 59 cm - Perm. Gross vehicle weight: 3,000 kg - Unladen weight: 995 kg - Payload: 2.005 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/65R14 - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing lights Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Fpsdpfou Hrviox Aa Esd

Condition: new, empty load weight: 760 kg, maximum load weight: 1,940 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,630 mm, color: silver, construction height: 2,650 mm, working width: 2,470 mm, Equipment: cable winch, Light alloy rims, comfort package, hydraulics, automatic reverse, drive-on ramp, manual cable winch / drum size up to 280x165cm, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. manual cable winch / drum size up to 280x165cm Designed for cable drums up to a diameter of 2800mm and a width of 1650mm. TECHNICAL DATA: - Make: Stedele - Model: KTT 27 - Vehicle type: Cable drum trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 330 x 163 x 0 cm - Overall external dimensions: 499 x 247 x 265 cm - Perm. Gross vehicle weight: 2,700 kg - Unladen weight: 760 kg - Payload: 1,940 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185R14C - Chassis: ALKO rubber suspension - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brakes: Yes - Number of axles: 2 - Locks: Eccentric locks - Tipping / lowering function: Tiltable at the rear - Overrun device/brake: ALKO - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Aluminium chequer plate mudguards - Cable winch & winch bracket: Manual cable winch - Supports: Yes - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Plug for lighting: 13-pin DESCRIPTION - Designed for cable drums up to a diameter of 2800mm and a width of 1650mm. - Standard pipe support approx. 80mm - Torsion-resistant chassis with solid support frame hot-dip galvanized - Easy operation of the support frame with or without cable drum - Barrier-free insertion of the cable drum - Backlash-free storage and securing of the drum by fixing - Solid support wheel holder and rear support - Sturdy telescopic crank supports at the rear - Incl. robust and maintenance-free manual cable winch Pulling force approx. 2,300 kg - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Robust and maintenance-free manual cable winch hot-dip galvanized - robust aluminium checker plate mudguards, accessible - automatic reverse - ALKO overrun device and parking brake - 13-pin plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - folding license plate holder Accessories can be retrofitted - please enquire: - brake arm - Stedele micro pipe holder for 3 drums - 100 km/h approval with shock absorbers - spare wheel - storage box - reversing light - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Fjdpsu Hr A Aefx Aa Eopd

Condition: new, empty load weight: 680 kg, maximum load weight: 820 kg, overall weight: 1,500 kg, loading space length: 2,970 mm, loading space width: 1,960 mm, loading space height: 2,300 mm, loading space volume: 13.8 m³, color: black, construction height: 2,940 mm, working width: 2,050 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, sheet steel sandwich body 40mm walls, braked, PVC floor, sales hatch + bag storage, gas door, * IMMEDIATELY AVAILABLE * Sheet steel sandwich body 40mm walls, braked, PVC floor, sales hatch + bag storage, gas door TECHNICAL DATA - Vehicle type: Box trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Interior dimensions (L x W x H): 297 x 196 x 230 cm - Exterior dimensions (L x W x H): 452 x 205 x 294 cm - Floor loading height: 55 cm - Perm. Total weight: 1,500 kg - Unladen weight: 680 kg - Payload: 820 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, standard with clamp - 100km/h approval: Optional, can be retrofitted Vehicle body: - Brake: Yes - Number of axles: 1 - Floor: Wooden floor - Walls material: Sheet steel sandwich insulated 40mm - Roof material: Sheet steel sandwich insulated 40mm - Colour: Black - Tipping / lowering function: None - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar - Mudguards: Plastic - Side door: No - Side flap: Yes: right and rear - Rear doors / tailgate: Door in front - Rear door / tailgate material: - - Tailgate load: - - Rear clearance dimension: - - Locks box body: Standard door handle - Drive-on angle: - - Supports: 4x scissor supports, rotatable - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Optional, can be retrofitted - Rear lighting: Incandescent bulbs, lamps mounted on the rear wall - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - Single-axle - KNOTT overrun hitch - Floor plate made of multiplex - Side walls made of very solid sheet steel sandwich, 40 mm thick - Sales flap on the right side + bag rack - PVC covering on the floor - Door in front wall, lockable from the inside and outside - Step on the drawbar - Support wheel with clamp - 4x scissor supports mounted incl. crank automatic reversing system - plastic mudguards - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - registration papers: COC papers Accessories can be retrofitted at extra cost - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - 230V or 400V supply line incl. sub-distribution - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Fodpfsu Htllox Aa Eopd

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2026, loading space volume: 34 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Semi-Trailer STC 34 Code L4BH Chemical First Registration Ø Unladen weight: 7,580 kg Ø Stainless steel chassis, polished to a high gloss Ø BPW axles with large disc brakes, 430 mm Ø 1st axle is a lift axle Ø Crank support legs, steel, full-load capable Ø 6 tires, size 385/65 R 22.5 Fpedpfx Ajx Rtafsa Ejd Ø Aluminum rims, ALCOA Dura-Bright, high gloss Ø WABCO trailer EBS with RSS (Roll Stability Support) Ø Tank: 34,000 liters, made of stainless steel 1.4571 (AISI 316 Ti) Ø Operating pressure 3.0 bar / test pressure 4.0 bar Ø Insulation: 100 mm glass wool Ø Single compartment with 4 baffle plates Ø 5 manhole covers: 3x DN500 and 2x DN350 Ø 1 vent valve by Fort Vale Ø 1 safety valve Ø 1 check valve Ø Air line on right side, DN 50, with TW 50 connection at front right Ø Heating preparation, 4-channel hot water Ø 1 discharge outlet, DN 100 uninsulated, with sampling tap at rear right and TW 80 coupling Ø 1 emptying (cleaning) system Ø Pneumatic bottom valve Ø Hose tubes left and right, DN 150, approx. 6 m long RENTING is the new BUYING – also available from us as a full-service rental.

Condition: used, maximum load weight: 34,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2024, Equipment: ABS, 3-axle SCHWARZMÜLLER aluminum half-pipe tipper semi-trailer 25 cbm First registration: 04/2024 Mileage: 49,490 km Internal dimensions (LxWxH): 7,650 x 2,330 x 1,470 mm Unladen weight: only 5 t Loading height: 3,100 mm Fifth wheel height: 1,200 to 1,250 mm Aluminum trough in semi-circular segment construction Continuous 6 mm floor plate Wall thickness also 6 mm plus additional 6 mm aluminum wear plates in the rear area, approx. 3,500 mm long, continuously welded External aluminum tailgate, without discharge chute Automatic mechanical 2-hook central locking High-pressure front-mounted HYVA cylinder, 250 bar Roll-over tarpaulin with central locking Fedpfx Ajylr Ucsa Eopd Chassis: steel frame Crank landing gear WABCO trailer EBS with RSS anti-sway protection SAF axles with large 430 mm disc brakes, reinforced off-road version 1st axle: lift axle Speed-limited traction aid (Traction Help Plus) Automatic tipping lowering system Tyres: 6 x 385/65 R 22.5 Aluminum air tanks Tire pressure monitoring with sensors in wheels, display in driver's cab Full LED lighting 2 additional LED reversing lights RENTING is the new BUYING—available immediately from us with full-service rental or leasing.

Condition: used, maximum load weight: 7,370 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 06/2012, loading space length: 5,160 mm, loading space width: 2,430 mm, loading space height: 500 mm, loading space volume: 6 m³, Year of construction: 2012, Equipment: ABS, Wörmann Tandem Three-Way Tipper VIN: C0W85180 Chassis / Attachments: * Leaf suspension * 2 x Gigant axles with drum brakes * Tyres: 235/75 R 17.5 * Tyre tread remaining: approx. 80% front, rear NEW * Fixed underride guard * Drawbar cranked and height-adjustable Body: * Three-way tandem tipper * 2 x loading ramps * Storage compartment for ramps * 6 tie-down rings per side * 6 heavy-duty lashing rings per side Fedpfx Aeyn T D Dsa Espd * Approx. 6 m³ capacity * Pallet width Weights: * Gross weight: 10,500 kg * Payload: 7,370 kg * Unladen weight: 3,130 kg Other features: * German registration * 1 previous owner New main inspections, safety checks, or weight downgrades/upgrades are available upon request. We are pleased to assist you in obtaining export/transfer number plates; transport of your purchased vehicles within Germany is also possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in reconditioning and trading of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, we offer a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we provide you with an excellent all-round service package and assign you a competent contact person to support you when buying or selling vehicles. Convince yourself! Our service for you: Loading of vehicles We are happy to assist you in loading your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Temporary/export number plates We are happy to assist you in obtaining export/temporary number plates.

Condition: used, mileage: 580,000 km, power: 350 kW (475.87 HP), first registration: 09/2018, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, soot filter, traction control, trailer coupling, D6G Automatic climate control, Q4Z saddle coupling, low-maintenance, lubricated locking mechanism, A1C front axle 7.5 t, A1Z front axle, cranked design, A2E rear axle, 440 mm crown wheel, hypoid, 13.0 t, A2X rear axle with active, regulated lubrication, B1B electronic braking system with ABS and ASR, B1D electronic air supply unit, medium capacity, B1F heater for electronic air supply unit, B2A disc brakes on front and rear axle, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5J brake and electrical connections, low position, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5B tread plate over frame, partial coverage, C5D step access, behind cabin, left side, C5P frame bolted, C6C steering, single-circuit, C6P power steering pump, electronically controlled, C6Q stabilizer, front axle, C7F front underrun protection (ECE), aluminum, C7T integrated rear section, C8C rear axle mudguards, 2500 mm vehicle width, C8H 3-piece mudguards with EC spray protection, C8I spray protection (EC), front, C8Y underbody paneling, aerodynamic, C8Z side paneling, aerodynamic, D0L smoker’s package, D0S compressed air connection in cab, D1C driver’s comfort suspension seat, D1N functional passenger seat, D2N seatback release, driver’s seat, D3A upper comfort bed, wide, level-adjustable, D3B lower comfort bed, D3Q velour seat cover, driver’s seat, D3T velour seat cover, passenger’s and center seat, D4T curtain, crosswise in front of bed(s), D4Y sun blind, side, driver’s side, D5Y rubber mats. We are available by phone Monday to Friday until 8:00 pm and Saturday until 4:00 pm!! Additional information: Leasing/financing and trade-in possible!! Fpodpfxsifx Nbs Aa Ejd Errors and interim sale reserved!! All information is non-binding ... more on our homepage

Condition: new, Year of construction: 2026, machine/vehicle number: PRJ069841, ALZMETALL Bench Drill Machine Drilling capacity in steel 14mm Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-table distance min. / max. 75/357mm, machine table height adjustment by hand crank, machine base plate, usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-base plate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Stepless speed adjustment 230–4000 rpm Standard equipment: 5" TFT LCD display with touch function: manual input for target spindle speed, actual speed indicator, integrated drilling depth display with touch zero reset, virtual drilling depth scale on display, machine status and warning messages on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, three separate pushbuttons for forward - reverse - stop, spindle lock with brake function, spindle guard with electrical interlock, lockable main switch, mushroom-head emergency-stop button (latching), stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD-structured paint signal white RAL 9003, PANTONE 7545c, black Delivery time: ex stock Waiblingen Beinstein Fsdjlub Htspfx Aa Espd

Condition: used, maximum load weight: 22,550 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 13,520 mm, loading space width: 2,480 mm, loading space height: 3,045 mm, Year of construction: 2019, Equipment: ABS, VEHICLE NUMBER: BJO530 ----* Exterior features: * Step-frame jumbo semi-trailer, cranked design * Spare wheel holder (13mm tread depth) * Plywood box body, Aeroform version * Rear doors, passage width: 2,470mm, height: 3,010mm * Side door at front right with comfort access * Side flaps 4000mm x 1650mm, electrohydraulic operation * GRP (fiberglass) skylight * Electrical system 380 V with power inlet socket ----* Technical specifications: * SAF axles with drum brakes * Tires: 245/70 17.5 twin wheels Fpjdpfx Aaeymuk Ne Ejd * Tread depth in mm: 1st axle: 13/13/13/13, 2nd axle: 13/13/13/13 * Interior lighting * 230V outlets * Sales counter * Cabinet system * Drawer system for small parts storage * Load compartment length: lower deck 9,445mm, platform 4,100mm * Step lower deck to platform: 300mm * Interior height: lower deck 3,045mm / platform 2,745mm * Unladen weight: 6,450kg * Coupling height: 1,150mm ----* Hire purchase example: €449 monthly rate, term: 60 months, 10% down payment (your current vehicle can also be accepted), 10% final installment. * Delivery to your location possible. Trade-in / Leasing / Financing. We make it possible!

Condition: new, empty load weight: 1,400 kg, maximum load weight: 1,300 kg, overall weight: 2,700 kg, loading space length: 4,490 mm, loading space width: 2,050 mm, loading space height: 2,300 mm, Promotional trailer for trade shows as a turnkey system stand. With a trade show trailer, you save both time and money. Who isn’t familiar with the lengthy process of assembling a trade show display system? Many hands make light work, but the setup can still be tedious. As a dealer for car trailers who has attended trade shows, city festivals, business expos, or similar events and has sold on-site, I always found traditional exhibition stands troublesome. Too much staff and lengthy set-up times—these issues are eliminated with a trade show trailer. Fsdpfx Ajyk Hhzea Eepd Once you’ve equipped your car trailer for promotional purposes and branded it, you’re ready to go. Upon arrival at the exhibition grounds, you can unfold the mobile stand in no time and start your sales or promotional activities immediately. Here is an overview of our useful and essential standard features for the promotional trailer: - Entry door with personnel lock - Step on the drawbar - Fold-out stairway with lift-assist, approx. 340x110cm - Folding handrails - Lockable sales hatch with lift-assist, approx. 340x110cm - Walkable roof (max. load 70kg) - Promotional banner approx. 450x80cm, can be raised with lift-assist for outdoor branding - Ladder - Four sturdy crank supports - External 230V power inlet - Distribution box with residual-current device (RCD) - Nine power sockets - Two linear luminaires with switches - Silver sandwich construction on the outside, white on the inside - Robust welded chassis - Extra sturdy, hot-dip galvanized V-drawbar This ensures a professional, efficient, and mobile presence at any event.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2018, total width: 2,550 mm, total height: 980 mm, Equipment: ABS, Krone ZZB18eLZ Dolly Mega, steered axle, SAF axles, 23,000 km, large Wabco Trailer SmartBoard, single owner, as new condition. Technical Description: Fedpfx Aaoymgnyj Ejpd Frame constructed from double-T longitudinal beams, welded with cross members. Fifth-wheel coupling mounted on a turntable, build height approx. 185 mm. Rear underrun guard compliant with EC regulations. Drawbar for steered axle with bolted-on 50 mm or 57.5 mm towing eye. Low-coupled length: 4,150 mm (extendable by 4 x 100 mm); high-coupled length: 3,500 mm (extendable by 3 x 100 mm) – measured from center of towing eye to center of fifth-wheel plate. Front support legs with crank and gearbox. Actively steered dolly axle, low maintenance with disc brakes (430 mm), ET 120, air suspension featuring lift and lowering function, 1 valve, hub-centric wheel centering. Tyres: 4 units, size 445/45 R 19.5, brand per Krone specification. Wheel covers compliant with EC Directives 78/549/EEC and 91/226/EEC, with corresponding spray guard system; black plastic quarter-shell fenders with top tarpaulin cover, rear mud flaps. Braking system compliant with ECE-R13, including vehicle stability control, spring-type parking brake, EBS system (2S/2M), 2 sensors on one axle, diagnostics via ISO7638 connector (EBS power cable), palm coupling connections, trailer brake connections mounted on rail within chassis. Lighting and signaling equipment per ECE-R48: two 7-pin sockets DIN1185/3731, LED license plate, outline, and side marker lights, multifunction rear lights including one rear fog light and one reversing light, electrical connections for trailer mounted in chassis rail, electric and air connection cables for trailer. Steel parts shot-blasted, KTL-primed and powder-coated; standard single-color finish. Underrun guard and light support powder-coated in white; axles and wheel hubs in RAL 9005; add-on parts zinc-coated in black; rims in natural silver; contour markings per ECE-R48. Despite utmost care, errors in the advert cannot be ruled out. Subject to errors and prior sale!

Condition: new, Year of construction: 2025, functionality: fully functional, conveyor belt width: 370 mm, warranty duration: 24 months, total width: 630 mm, total length: 1,670 mm, total height: 580 mm, input voltage: 230 V, table length: 600 mm, empty load weight: 79 kg, opening width: 25 mm, power: 0.37 kW (0.50 HP), New machine 24 months warranty Advantages: + Excellent price-performance ratio + Robust, compact table-top dough sheeter + Operation via push buttons and control lever for rolling direction + Suitable for rolling and laminating all types of dough Fodpsw T Rp Uofx Aa Ejpd + PVC conveyor belts, easy and quick to clean + Also suitable for marzipan and rolled fondant + Tables can be folded up on both sides (left and right) + No high-voltage connection required + Integrated motor and flour container + Scrapers can be removed easily without tools + Machine delivered as standard with 1 manual crank and 2 dough collecting trays + Can be placed on almost any table (minimum required depth: 50 cm) + Fast spare parts supply within 1-2 working days Technical data: - Belt width: 350 mm - Table length: 600 mm each = 1200 mm total - Roller adjustment: from 1 mm up to 25 mm (depending on product) - Suitable for up to 1.8 kg dough - Motor power: 0.37 kW - Electrical specifications: 230V - 1Ph - 50Hz - Dimensions: --- Working position: 1310 x 630 x 500 mm (W x D x H) --- Rest position: 590 x 630 x 580 mm (W x D x H) - Net weight: 79 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New machine - Rondomat 4000 Successor model to the SWL 6407 2-year warranty Advantages: + Robust, mobile dough sheeting machine with base + Equipped with stainless steel tables and stainless steel base + Easily movable, fitted with swivel castors and locking feet for stable positioning + Operation via push-buttons and reversing lever + Standard high-quality linen belts fitted + Suitable for all types of dough for sheeting and laminating + Integrated electric motor + Tables can be folded up to the left and right + Scrapers can be easily removed without tools + Machine comes standard with one hand crank + Hand crank supports on both left and right sides + Dough catching trays on both sides + Fast spare parts supply within 1-2 business days Available at extra charge: Fpjdpfoivdlpjx Aa Eod - Machine fitted with Original RONDO plastic belts + €799 net Conversion may extend delivery time if necessary! Technical data: - Belt width: 640 mm - Roller width: 660 mm - Table length: 3,320 mm - Roller gap adjustment: from 0.2 mm to 45 mm (depending on product) - Speed: approx. 65 cm/sec - Motor power: 1.1 kW - Electrical connection: 400 V - 3Ph - 50Hz - Fuse: 16A CEE plug - Dimensions: --- Operating position: 3700 x 1235 x 1200 mm (W x D x H) --- Rest position: 2150 x 1235 x 2170 mm (W x D x H) - Net weight: 240 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New Machine - Econom 4000 Successor model to the SSO 513 2-year warranty Advantages: + Robust, mobile dough sheeter with base frame + Equipped with stainless steel tables + Easy to move, with swivel castors and locking feet for stability + Operation via push buttons + Suitable for sheeting and laminating all dough types + Tables fold up on both sides (left and right) + Scrapers can be easily removed without tools + Machine comes standard with one hand-operated crank + With dough catch pans on both sides + Fast spare parts supply within 1-2 working days Technical Specifications: - Belt width: 475 mm - Roller width: 500 mm - Table length: 1,660 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 0.75 kW - Electrical requirements: 400 V - 3Ph - 50Hz - Circuit protection: 16A CEE plug - Dimensions: --- Working position: 2000 x 940 x 1330 mm (W x D x H) --- Rest position: 755 x 940 x 1780 mm (W x D x H) - Net weight: 130 kg Fpjdpfxowktlbo Aa Ejd Optional (for an additional charge): - Machine equipped with original RONDO plastic belts + €349 net Retrofitting may extend the delivery time if applicable!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New machine – manufactured in Switzerland 2-year warranty Advantages: + Robust, mobile base dough sheeter + Equipped with stainless steel tables + Easily maneuverable, with swivel castors and locking feet for stable positioning + Operation via push buttons Fpjdpfx Asivdk Isa Ejd + Suitable for sheeting and laminating all types of dough + Tables can be folded up on both the left and right sides + Scrapers can be removed easily without tools + Machine is equipped as standard with 1 manual hand crank + Includes dough collection trays on both sides + Fast spare parts supply within 1–2 working days Technical data: - Belt width: 605 mm - Roller width: 633 mm - Table length: 3,320 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 1 kW - Electrical connection: 400 V – 3Ph – 50Hz - Protection: 16A CEE plug - Dimensions: --- Working position: 3800 x 1072 x 1330 mm (W x D x H) --- Rest position: 1630 x 1072 x 2300 mm (W x D x H) - Net weight: 170 kg Optional, at additional cost: - Machine equipped with original RONDO plastic belts + €799 net Please note: Conversion may extend the delivery time!