Used Cross Conveyors Feeders for sale (15,804)

Condition: used, Length: 285 cm Belt width: 32 cm Ksdpfxezdnnzo Ah Djdr Side rail height: 11 cm Overall height: 24 cm Belt for food processing Stainless steel Manufacturer: Haith Please check out my other listings.

Condition: excellent (used), Year of construction: 2000, A receiving conveyor with a steel hinge plate belt. Last loaded with a wheel loader and a tipping truck. Overall length: 9.6 m Dimensions of the feed hopper: 8.0 x 3.6 m Width of the conveyor at the bottom: 1.85 m Maximum width with drive: 3.2 m Width of the conveyor belt: 1.3 m Overall height: 5.3 m Belt speed: 0.05-0.29 m/min Conveyor chain: FV 315 with bushing and idler roller Throughput rate: 3 to 14 m³/hour Gear motor for belt, SEW: 0.75 kW Speed: 0.2 RPM Torque: 18000 Nm Speed of the winding shaft: 64 RPM Gear motor for winding, Flender: 7.5 kW Total weight: approx. 20 tons With steep-angle conveyor Kdedpfx Aheiwxmbj Der

Condition: used, Length: 315 cm Belt width: 45 cm Side guard height: 8 cm Overall height: 38 cm Drum diameter: 11 cm Belt suitable for food processing Acid-resistant steel Manufacturer: Haith We offer a wide selection; inquire about your desired size. Kodpozdvptjfx Ah Dodr Please see my other listings.

Condition: used, Length: 250 cm Width: 60 cm Sideboard height: 10 cm Overall height: 29 cm Food-grade conveyor belt Kdsdpfxozdnqis Ah Dsr Acid-resistant steel Please check out my other listings.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. Kedpfx Aet Hg Hush Djdr 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, vibrating feeder RNA 700mm bowl feeder RNA trough vibration feeder + linear feeder, with controller. 50 Hz nominal vibration frequency with double speed control Manufacturer: RNA Type: ESK-N80 trough diameter: 700 mm voltage: 220 volts 50Hz protection: ip30 vibration: 3000 c/min vibration regulator: RNA adjustable height stand +linear dosing unit Kdodeh S Il Tepfx Ah Dor length: 1520 mm

Condition: used, Length: 190 cm Belt width: 45 cm Working width: 62 cm – with side guards and apron Side guard height: 11 cm Side guard height: 21 cm Kjdpfx Aozdnp Esh Djdr Overall height: 24 cm Drum diameter: 10 cm Belt suitable for food processing Stainless steel Manufacturer: Haith Please check my other listings.

Condition: used, For sale: Conveyor belt as shown in the photos. Length: 2 m. Belt width: 0.19 m. Please feel free to contact me for more information. Kedpfxjyy Uh Ne Ah Dsdr

Condition: ready for operation (used), Powder feeder, screw conveyor, screw blender, used machine Dimensions: 855 x 720 x 810 mm Kjdpfx Asw Tt S Ejh Dedr Container size: 600 x 500 x 800 mm Electrical data: 230/400 V; 0.43 kW; 50/60 Hz The screw conveyor has a double bearing design and is equipped with a cover that opens due to the material flow.

Condition: good (used), Year of construction: 1999, Holtec cross conveyor with feed trough . 7 chain strands. Width 15.50 m. Conveyor length 5.0 m. Chain spacing: 3.75 - 4.0 - 2.4 - 1.8 - 1.5 - 1.35 m. Kodpfx Ajrdd I Ush Djdr Sturdy chains 125 x 60 x 8 mm. Drive via SEW geared brake motor.

Year of construction: 1994, condition: used, machine/vehicle number: 41094/30, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz Ksdoya H Hijpfx Ah Djdr - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, Length: 408 cm Belt width: 60 cm Working width: 62 cm – with side guards and a skirt Side guard height: 11 cm Total height: 24 cm Drum diameter: 15 cm Belt suitable for food processing Made of acid-resistant steel Manufacturer: Haith Kdsdpozdnnhefx Ah Dor The price is for one unit. Please check my other listings.

Condition: used, Transnorm roller conveyor ejector GF1800-600-550 RA2429 Make: Transnorm Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 600 mm length: 3715mm Overall height frame: 130 mm Frame / 300 mm discharge conveyor Rolls diameter: 50 mm Pneumatic control of the rollers 4 rows of discharge rollers including tensioning station for belts Without drive station, please contact us for this Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Kdedpfx Ahsw R Hkcj Dsr For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1998, condition: used, machine/vehicle number: 71257/1, with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome-plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx-d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment Kjdpezgt A Njfx Ah Dedr - Location: in stock

Condition: used, Cascade-type cross conveyor: - total length 7250 mm - total width 2100 mm - chain pitch 300 mm - five chain sections - motor power 4 kW Kdsdpjxuip Iefx Ah Dsr - six discharge chains

Year of construction: 2025, condition: new, Hello, We manufacture inclined wood feeders as well as other custom-made feeders – robust construction. Please feel free to contact us. Kjdjyk Hl Hjpfx Ah Dedr If you have any questions or require further information, please send us a message or call us.

Year of construction: 2022, condition: like new (used), functionality: fully functional, REF: MM6430 1 x Easibelt Coveya horizontal mobile conveyor with inverter. Manufacturer - Coveya Ltd Model - EB300 S/S. Date of manufacture - 2022. Belt dimensions - 10500mm L x 300mm W (270mm useable) x 920mm H (height adjustable frame). Distance between flights on belt - 950mm. Condition - Excellent, used for one season packing advent calendars. Kdsdpsy Unm Ijfx Ah Der

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, Equipment: documentation/manual, 2021 Star SR32 JII Type A (15,000 hours) 4m FMB Turbo 3-36, Hydrajet UB20 High Pressure Coolant, LNS Swarf Conveyor, FireTrace Suppression, JBS Guide Bush System, Fully inspected & serviced, 30 Day Warranty # Star SR-32JII CNC Sliding Head Lathe Machine Hours: Approx. 15,000 hours Maximum Machining Diameter: Ø32 mm standard / Ø34 mm optional CNC Control: Fanuc 32i-B ## Machine Configuration * Twin-spindle CNC sliding head lathe * Main spindle and sub-spindle * Main and sub-spindle full C-axis control * Gang-type tooling system * Cross-working driven tooling * Back-working tooling * X1, Y1, Z1, C1, X2, Z2 and C2 controlled axes * Type B configuration additionally incorporates Y2 control on the back-working unit ## Main Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 7.5 kW continuous / 11 kW short-time rating * Maximum headstock stroke: 320 mm * Full C-axis contouring capability ## Sub-Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 3.7 kW continuous / 5.5 kW short-time rating * Full C-axis contouring capability * Maximum chucking diameter: Ø32 mm / Ø34 mm optional ## Main Tooling * 6 × turning tool positions * Tool size: 16 mm square * 5-spindle sleeve holder * Maximum drilling capacity: Ø13 mm * Maximum tapping capacity: M12 × P1.75 ## Cross-Working / Driven Tooling Configuration options include: * 3 × ER20 cross-milling positions + 2 cartridge-type positions * Or 6 × ER16 cross-milling positions * Maximum milling capacity: Ø10 mm * Maximum driven tapping capacity: M8 × P1.25 * Cross-milling spindle speed: 6,000 rpm * Cartridge-type driven tooling speed: up to 8,000 rpm * Driven-tool motor: 2.2 kW continuous / 3.0 kW short-time rating ## Back-Working * Maximum chucking diameter: Ø32 mm / Ø34 mm optional * Maximum front ejection length: 125 mm * Maximum projecting component length: 45 mm * Back-working tool positions: * 6 positions – Type A * 8 positions – Type B * Stationary drilling capacity: Ø13 mm * Driven drilling capacity: Ø8 mm * Stationary tapping capacity: M10 × P1.5 * Driven tapping capacity: M6 × P1.0 * Maximum back-working driven-tool speed: 6,000 rpm ## Rapid Traverse * X1 / X2 / Y1 / Z1 / Z2: 35 m/min * Y2: 24 m/min on applicable Type B machines ## Ancillary Equipment Included * 4 metre FMB Turbo 3-36 Magazine Bar Feeder * Hydrajet UB20 High-Pressure Coolant System * LNS Swarf Conveyor * FireTrace Automatic Fire Suppression System * JBS Guide Bush System ## Machine Condition & Support * Approx. 15,000 operating hours * Fully inspected and serviced * Supplied ready for production * 30 Day Warranty * Warranty valid within the UK only ## General Specification * Coolant tank capacity: 255 litres * Approximate machine dimensions: 2,690 × 1,345 × 1,780 mm * Approximate machine weight: 4,100 kg Kdjdpfx Ahezuxfro Der * Power requirement: 8.8 kVA * Maximum sound pressure level: 77 dB

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 Kjdpfxerg Nzqj Ah Djdr ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Roller conveyor + cross conveyor + roller conveyor good technical condition Kjdpfx Aok Ritpsh Dodr

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Kjdpfx Aerg Nzxjh Dodr Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2016, Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Kodpfx Aok Abhhsh Djdr For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm Kjdpfx Ahox Url Us Djdr - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 Kodpfx Ahjrg Nzuj Dodr RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Kdsdszqvhvopfx Ah Djr