Used Deckel Fp 1 for sale (673)

Condition: good (used), Year of construction: 1986, 1 used universal tool milling machine make Deckel type FP 1 with active digital display Heidenhain Technical data: x-travel: 300 mm y-path: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Chsdpfxowuu Sds Aflof Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Csdpfx Afedzqb Seljhf Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Csdpfxjv Dxzco Afljhf Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 Codopmrpxepfx Aflohf ID: M100000409

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min Cjdpfx Afewwwr Eolohf total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: good (used), Tool Milling Machine DECKEL FP 1 with 3-Axis Active Digital Readout TNC 113 from educational institution - Travel X/Y/Z 300x160x340 mm - Speed range 40-2000 rpm - Infinitely variable feed on all three axes - Rapid traverse on all three axes - Vertical head adjustable by 100 mm - Vertical and horizontal milling setup - Tool holder ISO 40 - Drive power 1.5 / 1.9 kW - Fixed angle table - Chip tray - Coolant system Chsdpfxow Rbxno Afljf - Work light - Documentation Dimensions: LxWxH 1.3x1.2x1.7 meters / Weight 900 kg Errors and omissions excepted.

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: x-travel: 300 mm Cjdpfx Afern I Rzelshf y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm Chedpfjiy Ekvjx Aflsf weight 650 kg good condition

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN Chodpfxjw A Ap Hj Aflof table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee Csdpfxjchfyfo Aflehf geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: used, Year of construction: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm Codswl N R Nspfx Aflehf spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012 Cjdpfedzp T Ejx Afljhf

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm Csdpfjw A Apyox Aflohf - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Ceder En Dyjpfx Aflshf geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: used, Year of construction: 1963, functionality: fully functional, space requirement width: 1,400 mm, space requirement length: 1,040 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Copy milling machine in top condition, can be taken over by an engraver. 1 reduction/enlargement device 1 rotary table with 3 index plates 1 optical tracing device with locking jaws 1 drag table 1 articulated lamp 1 milling cutter extension 1 arbor for slotting cutter Chedpfx Afsxw Nn Aelsf various clamping devices and tracing templates 9 collets for milling spindles

Condition: good (used), Universal milling machine, tool milling machine, drill press (used) Manufacturer: Deckel Model: FP 4 3-axis Heidenhain digital display Travel paths: X-axis: 700 mm Y-axis: 400 mm Z-axis: 450 mm Feed rate: Longitudinal and cross: 10 – 500 mm/min Vertical: 5 – 250 mm/min Rapid traverse: Longitudinal and cross: 2000 mm/min Vertical: 1000 mm/min Tool holder: SK 40 Table size: 1000 mm x 390 mm Spindle speed: 31.5 - 1600 rpm Total power requirement: 5 kW Machine weight: approx. 2600 kg Machine dimensions (L x W x H): 2000 mm x 2000 mm x 2200 mm Coolant system Automatic tool clamping The machine is in good condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping available Machine location: 59510 Lippetal Cjdpfjx Dl Hzsx Aflshf

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Chjdpex A Eddofx Aflef Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Year of construction: 1990, condition: ready for operation (used), Offered is a Deckel FP 4 AT CNC milling machine year 1990. Control: Dialog 11. Coolant system: 70l, tool holder: SK40, tool changer: 20-fold, travels X/Y/Z: 560mm/500mm/390mm, table size X/Y: 900mm/530mm, spindle speed: up to 4000rpm, rapid traverse: 4000mm/min. Machine weight: approx. 2890kg. Tool changer defective. Viewing is possible by arrangement. Chedpsx Dm Dusfx Aflef

Condition: excellent (used), Digital display Travel range X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Chedjwn Td Ejpfx Aflof Tool holder ISO 40 Hydraulic vice Completely overhauled in 2019

Condition: excellent (used), DECKEL FP 2 LB Tool Milling Machine from University in Well-Maintained Original Condition - 3-axis digital readout "ACURITE" - Travel (X/Y/Z): 795x300x400mm - Automatic feeds / rapid traverse on all 3 axes (18 settings) - Spindle speeds 40-2000 rpm (18 steps) - Horizontal and vertical milling attachments - ISO 40 tool holders Codpfex Da Erjx Aflohf - Table clamping surface: 1000x440mm - Table clamping surface with auxiliary table: 1000x700mm - Swivelling vertical head with quill - Coolant system - Various tool holders - Machine light - Documentation Dimensions: LxWxH: 2.5x2.4x1.8 meters / Weight: 2200 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Chedjd Tytyjpfx Afljf Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2202-10147 with guarantee geometric acceptance with test report Codpsfcqfpsfx Afljhf Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawing thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Chedpfx Afsfzk Hfolof Mach. no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display Csdpfslfc U Djx Aflshf HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Csdpefzbtmefx Afljhf Model: FP 4 MK Aktiv Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions -used, as seen-