Used Dedusting for sale (191)

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Godow Ivrwjpfx Adbobi Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Gedpfx Adjw Ivrksbobi Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Gbsdpfsw Ivqmox Adboi essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, Year of construction: 1996, Kohlbach SU 1200 chip-fired boiler complete system, stepped grate firing (suitable for low-quality fuel), hot water system with max. temperature 120°C, output 1200kW, year built 1996, including pneumatic cleaning system, flue gas dedusting with multicyclone separator, flue gas fan, flue gas piping, chimney system – height 26m, two-part bolted construction (2 x 13m), automatic ash removal downward into ash bin, hydraulic feeder, hydraulic cross-pusher rod, walking floor with 3 pusher rods, total length 11m, total width 5.7m, control system included. The system is fully operational and, for its year, in very well-maintained and good condition. Dismantling must be carried out by the purchaser. Dismantling scheduled for June 2026; the boiler house roof will be opened on site to lift out the heating unit using a crane. The crane can approach up to approx. 5m from the roof opening. Gedpfxovytfuj Adbobi

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 10866888, functionality: fully functional, operating hours: 18,000 h, input voltage: 380 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 37,000 m³/h, suction capacity: 37,000 m³/h, intake manifold diameter: 600 mm, filter area: 1,087 m², noise level: 82 dB, total height: 5,785 mm, total length: 6,500 mm, total width: 4,500 mm, overall weight: 5,850 kg, compressed air connection: 6 bar, control voltage: 380 V, extraction nozzle diameter: 630 mm, inlet: 630 mm, nominal flow rate: 37,000 m³/h, nominal power: 60 kW (81.58 HP), sheet thickness aluminum (max.): 2 mm, space requirement height: 5,785 mm, space requirement length: 12,000 mm, space requirement width: 6,000 mm, Equipment: CE marking, Dust collector SCHUKO with Goldcone cartridge filter. 2 x 30 kW ventilators Still in use in our workshop in Brussels, BELGIUM, until we move to our new building in September 2026. Gedpfx Adexuftvjbjbi Only available in September 2026.

Condition: used, Year of construction: 2001, machine/vehicle number: 14873, LODIGE Coating and Enrobing Turbine Type LHC170 Year 2001 Partially perforated drum volume: 550 litres Drum material: AISI 316, K240 polished finish CIP system Batch size: 165–550 kg Sold complete with: - Turbine - Air treatment unit including: - 2-stage filtration (F8 + H13) - 1 preheating coil (steam) - 1 dehumidification coil (chilled water) - 1 main heating coil (steam) - 1 supply fan - Trolley with Watson Marlow spray pump (5 heads) - Dedusting unit - Air outlet filter - Exhaust fan - Sound attenuator - Electropneumatic cabinets - Siemens S7-300 PLC - Operator panel - PC with Lödige WinCC supervision software - Operator panel language: German and French - CIP skid with Prominent dosing pump - All necessary peripherals for operation: - Loading chute - Discharge chute - Sight glass cap - 5 spray nozzles - Flexible connection pipes for the CIP skid Dimensions: L3000 x W2300 x H2700 mm Weight of turbine assembly: 3 tonnes Complete documentation (in French) included: - P&ID - Drawings - Operator manual - Data sheets - Material certificates - Etc. Gbedpewpwt Hsfx Adbei Full program backup performed prior to machine shutdown.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Make: DURMA Type: HD-FS 3015 Fiber Working range X-Y-Z: 3100x1550x125 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 15 h Sheet thickness mild steel: 12 mm Sheet thickness stainless steel: 6 mm Sheet thickness aluminum: 6 mm Sheet thickness brass: 6 mm Sheet thickness copper: 3 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Gbjdodx Ewgepfx Adbei Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 141 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area standard L/W/H: approx. 10000x7000x2300 mm Weight: approx. 13700 kg Standard equipment Manual single table Sinumerik 840D control system Manually focusing Precitec Procutter F125 focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Chip conveyor Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting either Metalix or Lantek Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 2000 Watt including cooler Filter, compact dedusting Vanterm Automatic shuttle table Automatic laser head positioning Cloud license Air conditioning in the control cabinet The machine can be viewed and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration at our Staufenberg site. We will be happy to send you further information on request.

Condition: as good as new (ex-display), Year of construction: 2024, HD-FS Smart 3015 Fiber X axis: 3100 mm Y axis: 1550 mm Z-axis 125 mm Gsdpfxsft Sbio Adbjbi Max. plate dimensions: 3048x1524 mm Max sheet weight: 200 kg/m2 X axis: 100 m/min. Y-axis: 120 m/mm. Synrochnization: 156m/min. Acceleration: 16m/s2 positioning accuracy: + 0,05 mm Reproducibility: +0.05 mm Cutting thickness structural steel: 25 mm stainless steel: 15 mm aluminium: 20 mm Standard equipment Automatic shuttle table Control Sinumerik 840D Auto-Focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameters page (performance-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Workspace lighting warning light Multi-chamber extraction system Special Laser Cutting Options Remote maintenance CE Marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, Compact dedusting system Vanterm Laser Service Set Cloud License Lantek Expert Inside Software Lantek Software with positioning - Laser diode with automatic sheet metal position detection, measurement The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: new, Year of construction: 2024, Make: DURMA Type: HD-F 3015 III Fiber Year of construction: BEstellbar New (delivery time 6 - 8 weeks) Working range X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h sheet thickness mild steel: 25 mm sheet thickness stainless steel: 15 mm sheet thickness aluminium: 20 mm sheet size: 3048x1524 mm Loading weight: 200 kg/m² Gbodpfjfkpamex Adbji Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneously: 280 m/min. positioning accuracy: +/- 0,05 mm Repeat accuracy: +/- 0.05 mm installation area l/w/h: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-Focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameters page (performance-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Workspace lighting warning light Multi-chamber extraction system Special Laser Cutting Options Remote maintenance CE Marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, Compact dedusting system Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek Software with positioning - Laser diode with automatic sheet metal position detection, measurement Pierceline Focusline

Condition: as good as new (ex-display), Year of construction: 2024, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, positioning speed: 5 m/min, repeat accuracy: 5 mm, overall weight: 12,000 kg, warranty duration: 12 months, working range: 3,050 mm, Equipment: safety light barrier, Make: DURMA Type: HD-F 3015 III Fiber Working range X-Y-Z: 3060x1530x160 mm Laser power: 10000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 30 mm Sheet thickness stainless steel: 26 mm Sheet thickness aluminum: 15 mm Sheet thickness brass: 20 mm Sheet thickness copper: 15 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Precitec Procutter F150 focus auto-focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface Parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 10000 Watt including cooler Filter, compact dedusting Vanterm Gbodpfsdx Nalox Adbei Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet position detection, measurement Auto nozzle changer (Nozzle Changer) The machine can be viewed and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-F 3015 III Fiber Year of manufacture: 2024 Working range X-Y-Z: 3060x1530x160 mm Laser power: 4000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 10 mm Sheet thickness aluminum: 12 mm Sheet thickness brass: 10 mm Sheet thickness copper: 6 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Precitec Procutter F150 focus auto-focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Gbeded Sd Tnopfx Adbsi Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 4000 Watt including cooler Filter, compact dedusting Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet position detection, measurement Auto. Nozzel Changer (nozzle changer) Camera Inside The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Gbodpfxsxciide Adboi

Condition: used, Year of construction: 2012, machine/vehicle number: DHT 05-15-3.6-08-07,5, Machine no.: 181174 Manufacturer: AGTOS Godperq Hd Ssfx Adbobi Type: Continuous overhead conveyor blast machine Designation: DHT 05-15-3.6-08-07,5 Turbines: 8 turbines with 7.5 kW Extraction air volume: 7500 m³/h Year of construction: 2012 Other details: Characteristics of the installed filter system Residual dust content with secondary filter: ≤ 2 mg/Nm³ Type: Dry dedusting system Characteristics of the blasting system Blasting media (material and size): Steel abrasive Abrasive quantity (initial filling): 5 tons Workpiece material: Steel Max. Workpiece length: 1400 mm Passage width: 500 mm Passage height: 1500 mm Sound pressure level without sound insulation: ≤ 85 dB(A

Condition: new, Technical specification: Gbjdpfxsft Sqbe Adbei - Chamber volume: 690 liters - power supply: 230V ~ / 50Hz - power of dedusting system: 1 200 watt - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 13 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air demand: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: vacuum BRAGO - Gun: vacuum CTR - Working area dimensions: 1 150x710x850 mm - Sight glass dimensions: 305x610 mm - Working table load: up to 250 kg - Lighting: LED, adjustable in the range of +/- 90 degrees (two parts) - coating protection: powder coating - Working temperature: - 10 to + 50 degrees Celsius - Common work table: Yes - Inspection valve: Yes - Weight: 195 kg The offer includes: - Land Reko SCI-690-10 chamber cleaner. - Dust removal system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal - Pnematic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for entrepreneurs

Condition: new, Technical specification: - Chamber volume: 420 litres - Power supply: 230V ~ / 50Hz - Dedusting system power: 1 200 Watt - Nominal working pressure: 10 to - Cleaning capacity: up to with 10 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min Gbedpfoft Sp Nex Adbei - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR - Working area dimensions: 820x620x750 mm - Sight glass dimensions: 305x610 mm - Work table load: up to with 250 kg - Lighting: LED, adjustable in a range of +/- 90 degrees - Coating protection: Powder coating - Working temperature: - 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes - Weight: 170 kg The offer includes: - Land Reko SCI-420-10 Chamber cleaner - Dust extraction system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Pnematic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs - Device also available in leasing or financing

Condition: new, Technical specification: - chamber volume: 990 litres - Power supply: 230V ~ / 50Hz - Dedusting system power: 1 200 Watt - Nominal working pressure: up to 10 bar - Cleaning capacity: up to 15 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) Gbsdpfx Adoft Sqmoboi - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR - Dimensions of the working area: 1 600 x 870 x 730 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 250 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: Powder coating - Working temperature: - 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes - Weight: 250 kg The offer includes: - Land Reko SCI-990-10 Chamber cleaner - Dust extraction system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal - Pnematic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration model, used only for testing purposes (occupational health and safety authority), dusted and cleaned. Gedpfx Adsw H Rp Aebjbi

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration model, used exclusively for testing purposes (trade association), intentionally dusted and cleaned. Right-hand version with connection diameter: 300 mm with flange JET cleaning system Motor power: 7.5 kW Filter area: 32 m² Nominal air flow: 5,089 m³/h Maximum air flow: 6,000 m³/h Vacuum at 20 m/s at suction port: 2,731 Pascal (in dusted condition) Collection volume: 3x160 liters 5-meter connection cable with 32A CEE plug Gjdpfx Adjww Eryobjbi Dimensions: see photo

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Gjdpfx Asff Sbiedbsbi Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Gbsdexf Up Ijpfx Adboi

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 14522359, functionality: fully functional, input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, intake manifold diameter: 160 mm, filter area: 9.5 m², noise level: 69 dB, total height: 2,130 mm, total length: 1,715 mm, total width: 900 mm, overall weight: 345 kg, nominal flow rate: 1.447 m³/h, negative pressure: 2,200 Pa, Used Schuko extraction unit Vacomat 140/160 XPe Extraction connection D = 160 mm, Filter area 9.5 m², Godst D U Eyopfx Adbjbi Dust class "M", Test certificate H3/BGHM HO 193023, Motorized filter regeneration, Motor power 2.2 kW, Nominal air flow 1,447 m³, Optionally available: 1 gate control with automatic start €890.00 + VAT, Ex location Seevetal, without transport, Subject to prior sale.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 NESTRO® extractor, a new generation, powerful, compact, economical, and with some highlights that will inspire you. Vacuum filter for extraction and filtration of wood dust and wood chips. H3 test according to GS-HO-07 (BGHM), GS scheduled. Fire extinguishing device, fire protection flap / oxygen closure. Vacuum filter with JET compressed air pulse cleaning including suction nozzle, 5 m cable for socket connection (protective measure grounding), suction connection left / fan right Technical data: • Airflow max./nom.: 6,000 / 5,850 m³/h • Vacuum max./nom.: 2,950 / 2,400 Pa • Suction side connection: Ø 300 mm • Mode of operation: continuous operation Gbodow Naazspfx Adbsi • Current type: three-phase current • Power consumption: 7.5 kW / 16 A / 50 Hz • Fan/drive: IE3 asynchronous motor • Filter area: 36.2 m² • Filter regeneration: JET / automatic • Compressed air consumption per cycle: 560 Nliters • Chip disposal: chip bin with PE bag • PE bag (consumable): 500020 • Collection volume: 3 x 0.16 m³ • Weight: approx. 1,250 kg • Noise level according to EN 11201: 72-74 dB(A) in accordance with MRI (+/- 4dB) • Length x width x height: 3880 x 1020 x 2250 mm Required connections: • Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free • 1 x 32 A CEE socket / fuse 25 A For systems with chip sack filling, uniform filling cannot be guaranteed due to different extraction volumes and varying chip/dust contents Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2021, - Deduster up to 160 mm Gedpfxew I Uuko Adbjbi

Condition: new, Year of construction: 2024, New dust extractor Year of manufacture: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Suction nozzle: 160 mm, right Operating air volume: 2300 m³/h Volumetric flow max/nom.: 1780/1447 Vacuum at nominal air flow: 2450 Pa Vacuum before fan at VNenn: 3160 Pa Maximum sound pressure level: 74 dB(A) Filter regeneration: pneumatic, max. 7.5 bar Gbsdpfx Adew I U Hajbei Operating mode: continuous operation Compressed air connection required Availability: short notice Location: Hochheim

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Gbsdsw I U N Ispfx Adbsi Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Dedusting brush: yes Motor power: 2 x 15kW Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim