Used Deep Hole for sale (4,318)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Hnodexgu R Ijpfx Andsu Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: good (used), Year of construction: 1996, Siemens 840-D SL, approximately 2012 Table: 2200 x 2250 mm Hsdpjzq Ektsfx Andjnu Distance between columns: 3000 mm Max. workpiece height: 1200 mm Max. drilling depth: 600 mm Max. deep-hole drilling diameter: 35 mm Spindle speed: 3500 RPM Spindle power: 15 kW

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Hsdpouddimofx Andonu Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: excellent (used), drilling depth: 1,000 mm, overall weight: 20,000 kg, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 380 mm, drill diameter: 40 mm, rotational speed (max.): 4,200 rpm, table length: 1,000 mm, table width: 800 mm, table load: 9,000 kg, feed length W-axis: 500 mm, Equipment: rotational speed infinitely variable, IMSA DEEP HOLE DRILLING MACHINE, MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS 1250 TRANSVERSE AXIS (MILLING SPINDLE) 380 mm TRANSVERSE HEAD TRAVEL 500 mm VERTICAL TRAVEL 1000 mm MAXIMUM DRILLING DEPTH 1000 mm MAXIMUM DRILLING SPINDLE SPEED 4200 RPM MAXIMUM DRILLING DIAMETER 40 mm MAXIMUM MILLING SPINDLE SPEED 4000 RPM MAXIMUM THREADING SIZE M 40 Hsdpfxoytff Ds Andsnu MAXIMUM MILLING DIAMETER 65 mm SPINDLE TRAVEL 380 mm ROTARY TABLE DIMENSIONS 1000x800 MAXIMUM WEIGHT WITH STATIONARY TABLE 9000 KG MAXIMUM WEIGHT WITH ROTATING TABLE 4000 KG TOTAL MACHINE WEIGHT 20,000 KG

Condition: excellent (used), PR9000 pallet racking system for 42 Euro pallets Hnsdpsv Hp Eqofx Andeu This pallet racking system has been tested according to DIN EN 15512 with a maximum load of 2,200 kg per beam level and therefore has a maximum field load of 9,000 kg and can be loaded with 550 kg per pallet. The anti-slip safety device prevents stored goods from sliding off when the racking is arranged in parallel. Made of solid, high-quality steel for extreme robustness. Easily withstands high loads of up to 9,000 kg per field. High-quality processing of the entire pallet racking system. Plenty of storage space thanks to the 2 levels and 4 bays. Eye-catching blue and orange color scheme for maximum safety. Upright profile: Height: 5500 mm Material: Steel S-355 JR Dimensions: 80 W x 70 D x 1.5 Hole spacing: 50 mm (grid – offset) Surface: Powder-coated blue Profile design: Omega profile Depth: 1100 mm Manufacturing: Cold-rolled profile Field load: 9000 kg Beams: The beams can be individually hung at different heights in a 50 mm grid. Total load capacity per beam level: 1800 mm beam: 2000 kg 2700 mm beam: 3000 kg 3600 mm beam: 2200 kg Material: Steel S-235 JR (cold-rolled steel) Profile design: Rectangular profile Mounting: Hook tabs on each side of the beam for hanging, secured with a locking pin Surface: Powder-coated orange Manufacturing: Bent sheet steel Scope of delivery: 05 x Upright PR9000, 5.5 m high / 110 cm deep, field load: 9,000 kg 12 x Beam PR9000, 3600 mm wide, incl. locking pins, bay load: 2200 kg 04 x Beam PR9000, 1800 mm wide, incl. locking pins, bay load: 2000 kg 06 x Anti-slip safety device PR9000, 3600 mm 02 x Anti-slip safety device PR9000, 1800 mm Year of manufacture: 2020-2022 You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 Hnjdpfx Anjxyf E Nsdju • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm Hnsdpfx Anor Hbf Esdju >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Hodpfx Aer Hbf Tjndsnu Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. Hedeup Skwepfx Andonu possible. Quill diameter: 30 mm

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale Hnsdpfez Ahgnjx Andju

Condition: good (used), Solar Fence | Mobile Solar Frame, Used Total length: approx. 3,530 mm Total height: approx. 1,700 mm Modular system: The frame can be individually configured and adapted to the size of your solar modules and can be extended at any time with additional elements. Consisting of EACH: 04 x A - Shelf upright, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal braces, Foot plates (182x147x6 mm) The uprights are pre-assembled (bolted framework) 1,510 mm high 610|200 mm deep 08 x Solid rubber heavy-duty roller, used Design: Double-stop swivel roller Roller Ø: approx. 160 mm Roller width: approx. 40 mm Roller material: Solid rubber Plate dimensions: approx. 135 x 110 mm (W x D) Hole Ø: approx. 11 mm 08 x Pallet racking beams, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Hnsdpfxoznxf Se Andsu Box profile: 89 x 50 mm Beam type: SLO 089|2 Agraffe: 5 HK 1,140 mm clear width 16 x Locking pin Dexion, used Type: Speedlock P90 Material color: sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Spacer sleeves made of plastic M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: sendzimir galvanized 01 x Screw material Upon request, you will receive a complete, coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo Micro Inverter 800 Watt incl. Wifi, incl. 5 m AC Connection cable, new Growatt Battery Noah 2000 Watt incl. Wifi (Stackable up to 8 KW), new Solar Module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic Cable 2 x 3 m 6 sq mm Red/black incl. MC4 connector, new We will gladly arrange the contact for you. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for Hnedpoz Nkutjfx Andju window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: used, Year of construction: 2003, CNC long-turn lathe with bar feeder magazine, Stamag FMB Turbo 5-42 Hedjz Aqkcopfx Andonu Control system: TX8i with Traub tool monitoring Main spindle: - C-axis with driven tools - Mounting for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bushing Counter spindle: - Counter spindle as a motor spindle with hollow clamping and locking device with Z4 slide - C-axis - Tool carrier at the bottom, X1 / Y1 axes - 12 driven tool positions - Tool carrier at the top, X2 / Z2 axes - 12 driven tool positions - X3 - cross axis for front tool holder / counter spindle - Front tool holder, 5-position with Z3 slide, without tool drive - Cut-off station (5 tools) with X4 / Y4 axis, without tool drive - Articulated belt conveyor - Coolant system for externally and internally cooled tools, 20 l/min - 30 bar - System for deep-hole drilling with compact belt filter and coolant tank, 1000 L volume - Air deflection plates on the temperature control unit - Fire protection system for machining with cutting oil - Coolant mist extraction system

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Hodpfx Asvvx Hisndjnu Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Hsdpfx Anoztyxdodenu Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, drilling depth: 2,250 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 1,600 mm, table width: 1,300 mm, table load: 20,000 kg, Deep Hole Drilling, Milling and Tapping Machine 5 linear axes X, Y, Y1, Z, W Rotary table axis B Equipped with 3D CAD simulation, WISE PLUS system, electrical cabinet cooling, and fume extraction system. Capacity Gun drilling capacity: 40 mm Table X-axis stroke: 2000 mm Ram Y-axis stroke: 1500 mm Column Z-axis stroke: 700 mm Spindle taper: ISO 50 – DIN 69871 Motor power: 22 / 33 kW Table size: 1600 × 1300 mm Technical Specifications Drilling diameter range: Ø 5 – Ø 40 mm Maximum drilling depth: 2250 mm Milling capacity with cutting tools up to: Ø 60 mm Drilling axis inclination: W -15° / +25° Milling capacity: 400 cm³/min Filtration and cooling system tank capacity: 2000 L Maximum pressure: 80 bar Hnjdpfxjyuc Rts Andou Direct gun drilling with guide bushings: up to Ø 20 mm Rotary table load capacity: 20,000 kg Positioning: 360,000 positions 9 T-slots 18 H12 P=140 Positioning accuracy: ± 0.2 sec Linear Axes X: 2000 mm Y: 1500 mm Z: 700 mm W: 1630 mm

Condition: new, Year of construction: 2026, CORMAK WS16 Bench Drill Press The CORMAK WS16 Bench Drill Press is a compact yet exceptionally robust column drilling machine for metal, designed for precise drilling and tapping operations in workshop and production environments. Thanks to the automatic reversal of the spindle rotation direction, the machine enables efficient thread tapping in steel, making it an excellent solution for users who value efficiency and high machining quality. Main Advantages of the Machine - Integrated tapping function with automatic reversal to counterclockwise rotation – simplifies the internal thread tapping process. - High spindle rigidity – ensures precise operation even under heavy loads and when machining harder materials. - Robust construction made from seasoned cast iron components – provides operational stability and a long machine service life. - Large spindle travel of 100 mm – offers an extended working range, particularly when drilling deep holes. - Clear and easy-to-use control panel – intuitive machine operation with quick parameter adjustments. - U-shaped spindle guard with a safety limit switch – CE compliance and enhanced operator safety. - 360° rotating worktable with mounting slots – provides flexibility when clamping and positioning workpieces. Construction and Technology The CORMAK WS16 Bench Drill Press for Metal has been designed with an emphasis on strength and durability. The drill head, column, base, and worktable are manufactured from high-quality seasoned cast iron, ensuring exceptional rigidity throughout the entire structure. The spindle and transmission shafts are made from heat-treated, hardened steel, minimizing wear during prolonged operation. The drive mechanism is based on a belt transmission system, a solution valued for its quiet and stable performance. Precision and Operating Efficiency With a 5-speed spindle adjustment ranging from 480 to 1875 rpm and an MT2 Morse taper, the machine allows optimal machining parameters to be selected according to the material type and drilling diameter. The maximum drilling diameter in steel is 16 mm, while tapping operations can be performed up to M10. The clear control panel and the ability to reverse the spindle rotation direction significantly simplify operation while increasing overall machining efficiency. Applications The CORMAK WS16 Column Drill Press is perfectly suited for: - Metalworking and mechanical workshops. - Maintenance departments. - Training workshops and educational centers. - Single-piece and small-batch production. - Applications requiring high repeatability and precision in drilling and tapping operations. Standard Equipment - Adjustable keyed drill chuck (MT2 Morse taper) - Morse taper drift for tool removal - Spindle guard with safety limit switch (CE compliant) - Belt drive guard with safety limit switch Technical Specifications Maximum drilling diameter (steel) 16 mm Maximum tapping size (steel) M10 Column diameter 70 mm Column wall thickness 12.7 mm Spindle travel 100 mm Spindle-to-column distance 193 mm Hodpfjrif S Rjx Andonu Maximum spindle-to-table distance 330 mm Maximum spindle-to-base distance 613 mm Spindle taper MT2 Spindle speed range 480–1875 rpm Number of spindle speeds 5 Table dimensions 265 × 285 mm Base dimensions 360 × 480 mm Machine height 1130 mm Motor power 1.1 kW Power supply 400 V Net weight 131.5 kg Machine dimensions 600 × 400 × 1150 mm

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new Hnjdjyupulopfx Andsu

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Hjdpfx Anez H Dwnjdenu Availability: short-term Location: Flörsheim

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 12.020 mm Number of bays / row of shelves: 04 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 05x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 24x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm Hnedem Rghpepfx Andou

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Hsdsyuty Sepfx Andjnu Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations Hedpfsz Ipmkox Andjnu - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: used, Year of construction: 2015, functionality: fully functional, For filled Berliner donuts, yeast donuts, apple swirls, coated quark balls, and spritz cookies. Hnsdpjz Auabjfx Andju

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Height: 2,715 mm ? Width: 2,550 mm ? Loading space length (inside): 13,620 mm ? Loading space height (inside): 4,000 mm ? Loading space width (inside): 2,480 mm ? Fifth wheel height: 1,150 mm ? Permissible total weight: 36,000 kg _____ Axles ? Krone axles with disc brakes ? Tire brand: 6x 385/65 R22.5 ? Brake system in accordance with ECE regulation 13 ? 2 wheel chocks ? prepared for KRONE Telematics Dry ? KRONE Smart Tire Monitoring ? KRONE TPMS control unit ? Spare wheel holder: basket version behind the right-hand unit _____ Structure / attachments ? Loading height in the rear portal: 2,650 mm ? Panel thickness: 28 mm ? Roof in insulated design, panel thickness: 30 mm ? Forklift collision protection inside ? 2 row(s) of slotted hole lashing rails embedded horizontally ? Installation: height of middle of 1st lashing row above floor 800 mm ? Installation: height of middle of 2nd lashing row above floor 1600 mm ? double espagnolette lock per container door ? 1 toolbox, plastic ? 2 warning signs _____ Floor / tarpaulin ? 30 mm thick waterproof panel floor ? Tear sheet embedded in rear floor plate (4x700mm) Hedjvw Hlispfx Andjnu ? Floor loads up to 7,000 kg forklift axle load _____ Lighting / electrics ? Multifunctional rear lights (full LED), Hella (Gen.2) ? Incl. 1 reversing light ? 2 LED license plate lights ? LED side marker lights (flashing function) ? 4 KRONE LED ceiling lights _____ Paint finish ? Chassis: RAL 9005 DEEP BLACK ? Axle hub: RAL 9005 DEEP BLACK ? Body: RAL 9010 PURE WHITE

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012); Hnedpfxey Ey E Rs Andou