Used Defective for sale (999)

Condition: defective spare-parts repository (used), functionality: not functional, mileage: 32,711 km, first registration: 02/2009, fuel type: electric, axle configuration: 4x2, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 2, Year of construction: 2009, Equipment: power assisted steering, Electric transporter: + Piaggio Fedpfx Aasytc Rds Esfw + Model: S85 Electric Tipper + First registration: 15.12.2009 + 32,711 km + Electric drive + Tipper + Cab protection grille + Rear window + 2-seater + Heater + Drive defective + Without batteries + From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, functionality: fully functional, machine/vehicle number: FN 53xxxx, Year of construction: 2017, operating hours: 1,380 h, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,305 mm, power: 44 kW (59.82 HP), fork length: 1,200 mm, empty load weight: 5,454 kg, total length: 2,813 mm, drive type: Diesel, construction width: 1,320 mm, Diesel forklift truck Chassis number: FN 53xxxx Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostat double pedal Condition: Reconditioned without warranty Technical condition: Very good Fsdpfeu D R Ifsx Aa Esfw Front tires Type: Superelastic Front tires size: SE 27x10-12 Rear tires Type: Superelastic Rear tires size: SE 6.50-10 Description: serviced, technically and optically refurbished, UVV-approved, without warranty/liability for material defects Sideshifter, attached 3rd valve, rear working lights, front working lights, roof cover, windshield, safety light, interior mirror, windshield wiper, rear window, floor spotlight front and rear, flashing light, double pedal operation, solo pilot (single lever), soot filter, mechanical restraint system, panoramic mirror, fabric seat

Condition: used, This listing is for the Palltronic Flowstar 1V The unit is in full working condition and is ready for immediate use Palltronic Flowstar IV Filter Integrity Testing Instrument (and variants like Pall FFS04 S Palltronic Flowstar IV Filter Integrity Test Instrument / Pall Flowstar IV FFS04 Filter Integrity Tester) are precision filter integrity test instruments designed to check whether sterilising-grade membrane filters and associated assemblies have defects (like leaks or incomplete retention) before they are used in critical processes — particularly in pharmaceutical manufacturing and biotech Typical Uses These instruments are most commonly used in environments where sterility is critical: Final filtration before sterile drug product filling. Leak testing of single-use assemblies and filter housings. Quality control in vaccine production, biologics manufacturing, and related biotech workflows. Ffodpfsyfhdmox Aa Eew

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS Putty Application Machine 19.06.6512 Type: TF/P Plus Maximum working width: 150 mm Maximum height: 120 mm Feed speed adjustable up to 140 m/min Top powered pressure rollers x 6 Pneumatic pressure adjustment Bottom driven rollers x 6 CE mark Ffedpfx Aoytc Rkja Esw Year of manufacture: 2013 Product description: - Paint without waste – Verniciatura senza sprechi - Robust and efficient transport system featuring 6 motor-driven pressure units. - Various application heads ensure optimal results even for filling and defect repair materials. Designed for continuous cycle application of putty, gypsum, and paint onto mouldings, picture frames, and extruded profiles using a suitably shaped steel counter-template. The frame is made of steel sheet and tubular steel. Guaranteed forward feed via 6 lower metal rollers and 6 upper pressure wheels made of rubber, with variable speed control by inverter. The upper pressure wheels are mounted on free-running bearings to minimize improper wear. The pneumatic control panel is equipped with a selector for engaging the upper pressure wheels and independent pressure regulators.

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, cutting height (max.): 260 mm, actuation type: manual, Equipment: CE marking, Description Offered here is a robust metal bandsaw, model HESKA HES 260. The machine comes from our workshop inventory and has been regularly used. It is a classic, solidly built metal bandsaw meeting German industrial standards. Ideal for workshops, metal fabrication, maintenance departments, or small production facilities. Technical Data - Manufacturer: HESKA Maschinenfabrik GmbH - Model: HES 260 - Max. blade length: 3,660 mm - Year of manufacture: 1996 - Manual clamping device - Equipped with coolant system - CE-compliant version Condition - Used - Complete Ffjdpfx Aeyn D R Uoa Eew - Normal signs of use - Fully operational Commercial Note The price includes VAT, and an invoice with VAT can be issued! Machines of this type are extremely durable and require minimal maintenance. The listed price allows for an economical entry into a solid metal bandsaw, significantly below the price of modern new machines. The sale is made under exclusion of any warranty and liability for material defects. The machine is sold as seen.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WDB9062531N760410, mileage: 222,900 km, power: 139.74 kW (189.99 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 2,540 kg, overall weight: 5,000 kg, tire size: 205/75R16C, tire condition: 50 %, axle configuration: 2 axles, next inspection (TÜV): 02/2027, fuel: diesel, fuel tank capacity: 100 l, color: black, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel-air, number of beds: 1, Year of construction: 2018, Equipment: ABS, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, fog lights, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking heater, power assisted steering, power mirror, seat heater, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, trailer coupling, For sale is a Mercedes Sprinter 519 CDI Double Cab (DOKA) with sleeper cab. The Sprinter is very well equipped with numerous extras and has no defects. The main inspection (HU) has just been renewed. It is fitted with a fifth wheel coupling for a semi-trailer with a tail lift, which is included in this offer. The Mercedes Sprinter is in excellent technical and visual condition and has a full Mercedes dealer service history. This vehicle features two additional doors on each side (left and right). At 431,742 km, the Sprinter received a factory-new engine installed by Mercedes. The transmission, clutch, and turbocharger were also recently replaced at Mercedes. The vehicle has no outstanding maintenance. Engine is the highly sought-after 6-cylinder from Mercedes-Benz. Permissible gross train weight: 8.75t!!! Engine mileage: 222,900 km Vehicle mileage: 654,600 km Sprinter vehicle data: - First registration: 29.06.2018 - VIN: WDB9062531N760410 - Main inspection (HU): 02/2027 - Euro 6 - Engine power: 190 HP - Tire size: 205/75R16C - Manual transmission - Gross vehicle weight: 5,000 kg - Curb weight: 2,540 kg - Payload: 2,460 kg - Digital tachograph - Auxiliary heater - Air conditioning - Seat heating - Radio with navigation - Cruise control - Lane keep assist - Roof spoiler - Side spoilers left + right - Bed - Compressor - Xenon headlights The trailer by Fahrzeugbau Beck is a Tautliner with Edscha sliding roof and curtain side tarpaulin. The trailer features a Palfinger tail lift with 1,000 kg payload (including remote control), an underrun toolbox, and work lights. Trailer data: - Type: MSHP 9722 01 - First registration: 28.08.2018 - VIN: W09SPL107JLB85003 - HU: 05/2026 Ffjdeyrcutspfx Aa Ejw - Tire size: 235/75R17.5 - Gross weight: 6,600 kg - Curb weight: 2,786 kg - Payload: 3,814 kg - External dimensions: 9,780mm long, 2,320mm wide, 3,750mm high - Internal dimensions: 9,700mm long, 2,250mm wide, 2,500mm high - Palfinger tail lift type: MBB C 1000L with remote control - Edscha sliding roof - Sliding curtain side tarpaulin - Work lights - Storage box Offer is subject to prior sale, errors, omissions and modifications excepted. Financing is available upon request. We can also arrange customs clearance for you. Opening hours: Mon-Fri 8 a.m. to 2 p.m., or by appointment. Price is NET/negotiable. An invoice with VAT shown will be issued upon sale. Vehicle location: Im Gewerbepark 11 99441 Umpferstedt

Condition: used, 2x 6-spindle bar automatics as a package Fedpfx Asylhlqea Eefw Make: INDEX Model: MS25E (1 machine defective, used as a parts donor)

Condition: good (used), mileage: 203,232 km, fuel type: diesel, Year of construction: 2019, Field of application: Freight transport GVW: 5.500 kg Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Sprinter ambulance Year of build: 2019 Condition: Used Data: Fuel type: Diesel Mileage: KM 203.232 Gear type: Automatik Engine power/displacement: 140KW / 2987 Total permissible weight: 5500 kg Environment badge: Green/ Euro 6 Colour: Color white with foil sticker Special features: Daytime running lights, automatic climate control, seats: 2 front / 3 rear, airbag, electric windows and side mirrors, central locking, auxiliary heating, ABS, ESP, CD radio, power steering, fog lights Equipment set-up: Horn speakers Martin system LED signaling system Accident data recorder Foot switch for alarm system Rearview camera Ambulance table with universal stretcher attachment Information: Engine damage and particle filter defective Ffodpfsxc Hqlox Aa Esw Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 1122, For sale is a robust and fully functional Weiler lead screw and feed shaft lathe from 1968. Fodpeynwiwofx Aa Eofw The machine comes from our workshop inventory and was in use until recently. Technically, it is in working condition; cosmetically, it shows signs of use consistent with its age. This is a classic, solidly built toolmaker's lathe of proven German industrial quality. Ideal for workshops, training, maintenance, or small manufacturing businesses. —— Condition • Used • Fully functional • Not refurbished • Age-related signs of wear —— Special Features • Heavy-duty construction • Renowned Weiler quality • Simple, low-maintenance technology • Ready for immediate use —— Location & Handover Location: Eisenach Collection preferred. Loading by arrangement possible. Sale is made under exclusion of any warranty and liability for material defects. The machine is sold as seen.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline Fjdpjmx Sl Tofx Aa Ejfw

Condition: used, Cold circular saw for light metal Ffedjyl Nt Nspfx Aa Ejw Saw blade 350 mm ø Cold circular saw for steel, Spontan Saw blade 225 mm ø, pneumatic saw feed, length stop 1,500 mm Cold circular saw for steel, Spontan Saw blade 225 mm ø, hydraulic feed 300 mm Control unit defective

Condition: used, Year of construction: 2013, fuel type: hybrid, Weights Empty weight: 6.512 kg Functional Mast: articulated arm Lifting capacity: 225 kg Working height: 2.080 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1300 m Max swing of arm in degrees: 100150 Max swing of platform in degrees: 355 Transport dimensions (LxWxH): 6,5x2,29x2,15 Production country: UK Additional information Please contact Christian Theißen for more information Manufacturer: Nifty Lift Model: HR21 Hybrid Year of build: 2013 Fjdpfxexx N Ths Aa Eofw Condition: Used Data: Max. working height: 20,81 m Platform height: 18,81 m Max. reach: 13,02 m Drive type: Hybrid Total dimensions LxWxH: 6,50 x 2,29 x 2,15 m Length of transport position: 5,30 m Height transport position: 2,15 m Platform dimensions LxW: 1,80 x 0,86 m Max. basket load: 225 kg Swivel range: 355° Overhang: 0,46 m Movable up to working height: 20,80 m Max. Pitch angle: 40 % Wheel pressure (Support pressure): 39,28 kN Ground clearance: 0,16 m Own weight: 6.512 kg Special features: Rotating work basket 100°, basket arm/vertical rotation angle 150°, all-wheel drive, differential lock, oscillating axle, white tires, integrated soot filter. Information: Batteries defective Location: 04435 Schkeuditz immediately available

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Inverter DC model (Dual clamp) is a stationary pallet inverter machine with two movable platforms. This machine is mainly used to exchange pallets to new or for removing paper spacer or freezer spacer. The pallet is fed into the machine using a pallet truck or pallet jack. The machine can either 180-degrees or stop at desired position depending on your needs. To remove paper spacer or freezer spacer, the machine is rotated from 0 to 90-degrees, pressure from the platforms is alleviated to allow for removal of spacers. Changing pallets, either because of a defect pallet or swapping it to a plastic pallet, the new pallet is placed on top of the product, the platforms press down on the product, rotate 180-degrees, and the product is now standing on its new pallet. This does require manual pallet handling, to place the new pallet on top – to avoid manual lifts a different type of pallet-inverter is recommended. The pallet inverter can be delivered with a variety of extra equipment and surface treatments. Fedpfx Aaew Udngo Eofw

Condition: used, mileage: 160,000 km, power: 132 kW (179.47 HP), first registration: 03/2013, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, emission class: euro4, number of seats: 3, total length: 4,892 mm, total width: 1,904 mm, total height: 1,970 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), For sale here is a well-maintained Volkswagen T5 refrigerated box van with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 5 emissions standard * Second owner * Defects: minor issues with the locking mechanism on the right rear door as well as the cooling control unit (both fully functional) Features: Refrigerated box van * Diavia fresh service refrigeration up to 0 °C * DSG automatic transmission * Air conditioning * Auxiliary heater * Cruise control * Tow bar * Right-side sliding door * Rear parking sensors (PDC) * Registered as a commercial vehicle (N1 classification) * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * Much more... Fjdpeylgpbefx Aa Esfw Technical Data: Permissible total weight: 2,800 kg * Unladen weight: 1,850 kg * Payload: 950 kg * Towing capacity: 2,500 kg Why should you choose us? Attractive financing via our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair market conditions * Temporary registration (5-day/export plates), usually on the same day * Pickup service from the airport or train station All vehicles are professionally reconditioned and hygienically clean! Special features: Disinfection of the interior and ventilation system using ozone treatment. 2-stage exterior polishing. * If necessary, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Naturally, this includes new fluids, filters, and other necessary replacements, so you don’t have to worry about anything. On request, we can present the vehicle at an independent testing center or workshop of your choice. We are pleased to have sparked your interest and are available around the clock for all your enquiries. If you have any questions, comments, or specific requests, don’t hesitate to contact us! For more information and insights into our business philosophy, visit our website. Special equipment: 2nd battery 80 Ah, exterior accessories painted in body color, bi-xenon headlights, electronic package 1, driver assistance system: parking sensors front and rear, 17" suspension, interior release for tailgate/rear doors, multifunction display/on-board computer, cluster with 4 display instruments, radio pre-wiring, 2 speakers, cabin seats: double passenger seat, cabin driver’s seat with heating, lumbar support driver's seat, electrically adjustable, painted bumpers, cargo compartment lining: semi-high hard fiber, lashing eyes in cargo area, supplementary water heater, soft-close function for right sliding door Further equipment: Dual front airbags, left exterior mirror: aspheric, right exterior mirror: convex, rubber floor covering in cab, driver assistance system: brake assist (HBA), vehicle without windows in cargo/passenger area, vehicle without child lock in cargo/passenger area, tailgate without glazing, cabin air filter: pollen filter, bodywork: standard panel van, normal roof, headlight range adjustment, N1 commercial vehicle registration, engine 2.0L – 132 kW TDI, non-smoker package, wheelbase 3,000 mm, low-emission according to Euro 5, right sliding door in cargo/passenger area, upholstery: fabric, adjustable driver’s seat, first row of seats in cargo area omitted, 6.5x16 steel wheels, start/stop engine system, heat-insulating glazing.

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Inverter DC model (Dual clamp) is a stationary pallet inverter machine with two movable platforms. This machine is mainly used to exchange pallets to new or for removing paper spacer or freezer spacer. The pallet is fed into the machine using a pallet truck or pallet jack. The machine can either 180-degrees or stop at desired position depending on your needs. To remove paper spacer or freezer spacer, the machine is rotated from 0 to 90-degrees, pressure from the platforms is alleviated to allow for removal of spacers. Changing pallets, either because of a defect pallet or swapping it to a plastic pallet, the new pallet is placed on top of the product, the platforms press down on the product, rotate 180-degrees, and the product is now standing on its new pallet. This does require manual pallet handling, to place the new pallet on top – to avoid manual lifts a different type of pallet-inverter is recommended. The pallet inverter can be delivered with a variety of extra equipment and surface treatments. Ffjdpfxow U Rllo Aa Eew

Year of construction: 2026, condition: new, functionality: fully functional, Samzon Pile Turner PT1800-20 is a stationary stack-turning machine used to rotate pallets, erect products, change pallets or damaged pallet layers. This machine can be used for very long pallets – up to 3500 mm – and the platforms can move down to a minimum of only 400 mm. The pallet is fed into the machine using a pallet lifter or pallet truck. The machine can either rotate the product 180 degrees or up to horizontal level, depending on the need. The platforms are pressed together against the pallet and stopped by a pressure switch, which can be easily adjusted. When changing pallets, either due to a defective pallet or to change to a plastic pallet, the new pallet is placed on top of the product. The platforms press down on the product, rotate 180 degrees, and the product is now on its new pallet. Fodpfx Aasw U Rr So Eofw Pile-Turner is operated simply and easily by pressing a button on the control panel. Max opening 1800mm / minimum 400mm Max weight up to 2000kg (option 4000kg) Manual or semi-automatic operation Customer-tailored solutions.

Year of construction: 2007, condition: good (used), PRATI LF 330 Fodjyrg S Aspfx Aa Esfw Machine Type: Label finishing / inspection rewinder Year of Manufacture: 2007 Serial Number: LF012 Machine Type Code: LF330-C0-N0-T0-0-0P0-5-009 Location: Germany Condition: Used – good working condition Unwinding Unit • Shaft unwinder for self-adhesive label rolls • Pneumatic expanding shaft • Adjustable tension control • Suitable for narrow web label rolls Web Guiding System • Electronic web guiding system for precise web alignment • Edge guiding sensors installed Inspection Table • Large illuminated inspection table • Designed for visual inspection of printed labels • Enables removal of defective labels during the inspection process Slitting System • Razor blade or shear slitting system (depending on configuration) • Adjustable slitters for multiple lanes • Suitable for narrow label formats Rewinding Unit • Differential rewind shafts • Independent tension control for multiple rolls • Designed for rewinding several finished label rolls simultaneously Control Panel • Operator control panel for machine speed and tension adjustment • Emergency stop and safety control system Safety Equipment • CE certified machine • Safety guards and emergency stop systems installed Maximum Web Width: 330 mm Power Supply: 400 V – 3 Phase Frequency: 50 Hz Installed Power (Pn): 3.4 kW Nominal Current (In): 7 A Maximum Current (Imax): 9 A Short Circuit Current (Isc): 120 kA Machine Weight: approx. 2,200 kg Typical Applications • Final inspection of printed labels • Slitting of narrow web label rolls • Rewinding finished labels into customer roll formats • Converting and finishing of self-adhesive labels Advantages of PRATI Finishing Machines PRATI machines are widely recognized in the label converting industry for their robust construction, precise tension control and excellent operator ergonomics. The LF series allows efficient inspection and finishing of label rolls, reducing waste and ensuring consistent product quality before delivery. Thanks to the reliable web guiding and differential rewind system, the machine ensures

Condition: used, functionality: fully functional, machine/vehicle number: 911xxxxx, Year of construction: 2019, operating hours: 646 h, load capacity: 1,000 kg, lifting height: 6,500 mm, free lift: 2,058 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork length: 1,200 mm, empty load weight: 2,832 kg, total length: 1,640 mm, drive type: Elektro, construction width: 1,120 mm, Reach truck Chassis number: 911xxxxx Load centre of gravity: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: AC-Impuls Ffsdpfov Dnqgox Aa Eew Condition: Reconditioned without guarantee Technical condition: very good Front tyres type: Vulkollan Front tyres size: Vulkollan load rollers Rear tyres type: Vulkollan Rear tyres size: Vulkollan drive wheel Battery voltage: 48V Battery Ah: 465Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2019 Description: serviced, technically and visually refurbished, UVV approved, hours are real (origin known), without warranty/liability for material defects Side shift, integrated 3rd valve, roof cover, load protection grille, impulse control, full free lift, Solo pilot (single lever), fabric seat, battery (09/2019) with Aquamatik, external charger suitable

Condition: used, Year of construction: 1986, pressure 63 t stroke 160 mm throat 270 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 850 mm ram surface 450 x 360 mm oil volume 360 l power requirement 23,0 kW Weight 4,60 t dimensions of the machine ca. 1,2 x 1,8 x 2,9 mxmxm hole in the table 280 x 190 mm SPECIAL DEAL as is where is, electrical control defective Fjdpfx Aeylzwgea Eofw WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, mileage: 886,000 km, power: 324 kW (440.52 HP), first registration: 03/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,600 mm, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, 1st hand. Clean German vehicle. This MAN had a dedicated regular driver who is about to retire. The truck has always been driven with care. TÜV (technical inspection) valid until 05/2026. SP (safety inspection) expired; upon request, we can carry out a new full inspection (HU). No defects are known or expected. Tachograph inspection valid until 03/2026. SCHWARZMÜLLER three-way tipper. Tipper body approx. 5100 mm long / 2420 mm internal width. Side walls approx. 1000 mm high. Hydraulic cylinders leak-free. The body runs perfectly straight and clean. No dents in the sides or in the tipper floor. Electropneumatic side drop-side release on the left! Folding underrun protection! Unladen weight: 11,560 kg. Original factory gross vehicle weight rating: 33,000 kg. Gross vehicle weight permitted in Germany: 26,000 kg. Euro 5 engine. Automatic transmission. XL driver cab with 1 sleeper bed and separate air suspension (very clean). Automatic climate control. MAN navigation radio. LUIS turn assist system. ABS / ASR / EBS / ESP. Classic robust 6 x 4 chassis with drive shafts and 2 diff locks. Steel suspension at the front, air suspension at the rear. All disc brakes. Ringfeder trailer hitch with 26,470 kg towing capacity. Hydraulic connections for tipping trailer. Tyres: 315/80R22.5, all tyres about 50-70% tread remaining. The MAN is available immediately. Meticulously maintained in our in-house workshop up to the last day of use. NO backlog of repairs! Genuine mileage – the actual vehicle condition is much better than expected for this mileage! Ffsdpfx Aajvb R Ebe Eow Complete set of MAN original keys (6 pieces). Original MAN COC (Certificate of Conformity) paper available. This offer is valid only for traders and proven self-employed individuals of any kind, freelancers or authorities. Subject to prior sale and errors. Net price: €34,800! For export sales, we reserve the right to withhold 19% VAT as a deposit until receipt of the final written export certificate.

Condition: used, mileage: 575,323 km, power: 346 kW (470.43 HP), first registration: 10/2020, fuel type: diesel, empty load weight: 7,550 kg, maximum load weight: 10,450 kg, overall weight: 18,000 kg, tire size: 315/70 R 22.5, next inspection (TÜV): 10/2026, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of beds: 2, total length: 25,500 mm, total width: 40,000 mm, total height: 62,850 mm, Year of construction: 2020, front tire size: 315/70 R 22.5, Equipment: air conditioning, cruise control, differential lock, ADR, work lights, electrically adjustable and heated exterior mirrors, adjustable roof spoiler, differential lock, electric windows left and right, XXL cab, air-suspended driver's seat, leaf/leaf suspension, 12 gears, automatic transmission, lift and lower function, air conditioning: automatic climate control + stationary air conditioning, refrigerator, multifunction steering wheel, entertainment: radio / display defective!!!!, sleeper cab, 2 sleeping berths, driver's seat heating, sun visor, tank capacity 780, cruise control, Safety Package: adaptive cruise control + emergency brake assist + lane assist, additional brake retarder, Euro 6 D engine, adaptive cruise control, PTO with flange. Fsdpfxoykvi Ue Aa Ejfw

Condition: used, mileage: 124,928 km, power: 62 kW (84.30 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 06/2025, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Engine damage. The Volkswagen T5 Transporter 2.0 TDI with Euro 5 emissions standard is a used panel van suitable for commercial operations. This vehicle is equipped with a 4-cylinder diesel engine with a displacement of 1,968 cc, delivering 62 kW (84 hp). The transporter features a manual 5-speed transmission and has a truck registration, making it ideal for a wide range of transport applications. Ffsdpfsyntkdex Aa Eew First registered in June 2011 and with a mileage of 124,928 km, the van has an average fuel consumption of 7.2 l/100 km and CO2 emissions of 190 g/km. Twin sliding doors facilitate loading and unloading, while the green emissions sticker allows access to city areas with low-emission zones. The vehicle seats up to three people and is finished in the distinctive shade of Ginstergelb (broom yellow). There is an engine defect, which may affect the price. Viewings are possible during listed opening hours without prior appointment. Sale exclusively to business customers (agriculture, freelancers, small and large businesses) or for export. Subject to error and prior sale.

Condition: used, functionality: fully functional, Year of construction: 1995, actuation type: electric, bending force (max.): 35 t, overall weight: 2,000 kg, input voltage: 380 V, Equipment: foot remote control, lower tooling, upper tooling, Press brake Megobal PB35T – 35 t – fully functional – incl. tooling For sale is a used, fully functional press brake from the manufacturer Megobal. The machine is still in operation and can be inspected and tested under power by appointment. Technical details: Manufacturer: Megobal Máquinas Industriais Model: PB35T Year of manufacture: 1995 Pressing force: 35 t Drive: electric Operation: foot pedal / two-hand operation Voltage: 380 V / 3-phase Weight: approx. 2–2.5 t (estimated) Condition: - Machine is fully functional - Currently still in use - Well-maintained, age-appropriate condition - No known major defects - Ready for immediate use Equipment: - Includes upper and lower tooling - Machine is ready for loading - Can be loaded using an overhead crane - Inspection and trial run possible Location: 66450 Bexbach (Saarland) Sale due to restructuring / need for space. Private sale; sold without warranty or guarantee. Feel free to contact us if interested – additional pictures and videos can be provided. Fjdpfx Aaoymzife Ejfw The machine must be collected by the buyer. Loading on site with an overhead crane can be arranged. Organizing and covering transport costs is the responsibility of the buyer.

Condition: used, mileage: 145,882 km, power: 125 kW (169.95 HP), first registration: 11/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 16 m³, loading space length: 4,430 mm, loading space width: 1,760 mm, loading space height: 2,150 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle No. for customer enquiries: 123 ----Special Equipment: * Driver assistance system: Active Lane Keeping Assist * Cruise control system (cruise control) * Automatic climate control (Tempmatik) * Multimedia system MBUX (7'' touchscreen) * Windscreen wipers with rain sensor * Hill start assist (hill hold assist) * Fuel tank: main tank 93 l * Cab seats: double passenger seat * Overhead storage in driver's cab * Passenger side airbag * Armrest, driver and passenger door * DAB tuner (digital radio reception) * Ceiling light in cargo area with door contact * Grab handle on left rear pillar * Grab handle on right rear pillar * Tachograph control front, below headliner * Vehicle without chassis lowering * Front cup holders * Wooden floor in cargo area * Flip lid for storage compartment * Terminal strip for electrical connections (under driver’s seat base) * Comfort lighting in passenger/cargo area * Dashboard charging package (additional USB ports and 12V socket) * LED cargo area lighting * Cable duct at rear portal * Cable duct on side wall * Steering wheel and gear selector lever in leather * Fog lights * Full wheel covers * Spare wheel with road tyres * Spare wheel carrier under rear frame incl. jack * Reversing camera (defective) * Rear mud flaps * Front mud flaps * Cab seats: heated driver seat * Cab seats: driver seat with lumbar support * Cab seats: comfort suspension seat, driver side * Cab seats: low driver's seat base * Lashing rails in cargo area – side wall at beltline * Lashing rails in cargo area – side wall at roof frame * Tachograph preparation * Jack * Heat-insulating glazing (windscreen with top band filter) * Additional (air) heater, electric ----Standard Equipment: * 3rd brake light * Storage compartment above windscreen * Storage compartment below dash on passenger side * Rear towing eye * Adaptive brake light * Driver side airbag * Anti-lock braking system (ABS) * Traction control system (ASR) * Drive type: rear-wheel drive * Washer fluid level indicator * Exterior mirrors electrically adjustable and heated, both sides * Outside temperature display * Brake assist * Automatic headlight activation * Grab handle for sliding door on cargo compartment partition wall * Electronic brake-force distribution (EBV) * Electronic stability programme (ESP) * Driver assistance system: breakdown management * Driver assistance system: crosswind assist * Chassis: Stabilisation level I * Electric windows (2 front) * Exterior noise reduction * 6-speed manual transmission - TSG (Eco Gear) * Rear doors (opening angle 180 degrees) * Body/construction: standard high-volume panel van * Keyless Start * Child safety lock * Communication module (LTE) for digital services * Full partition in load compartment * Steering wheel (column mechanically adjustable) * Headlight range adjustment * Truck registration Ffjdpjxgk Agjfx Aa Eew * Side marker lights * Mercedes-Benz emergency call system * Engine 2.0 L – 125 kW CDI CAT * Particle filter * Wheelbase 4325 mm * Low emission according to Euro 6d standard * Sliding door cargo/passenger compartment right * Seat belt system with warning device (passenger side) * Seat belt system with warning device (driver side) * Upholstery: fabric * Cab seats: driver's seat with armrest * Steel wheels 6.5x16 * Engine start/stop system * Daytime running lights * AGM battery 92 Ah * Service interval display Assyst * Immobiliser

Condition: used, Year of construction: 2023, operating hours: 600 h, functionality: fully functional, power: 55.16 kW (75.00 HP), overall weight: 3,500 kg, The BBT 400 Woodzilla is a compact, powerful, and mobile drum chipper with aggressive feed, mounted on a 3.5-ton tandem trailer chassis and capable of 360° rotation. Technical Data Year of manufacture: 2023 Operating hours: approx. 600 hours Power: Diesel, Deutz TCD 2.9, 55 kW (75 HP), Stage 5 Feed opening: 320 x 500 mm Ffedpfx Asykzlzsa Eow Drum size: 400 x 500 mm, 4 knives Maximum log diameter: 32 cm Stabilisation: 4-way hydraulic support Z-crane Ben-Tele 550 Crane outreach: 5,500 mm Telescopic stroke: 1,100 mm Radio remote control for chipper and crane Brake system: Overrun brake Weight: 3,500 kg The machine is in good visual and technical condition. Location: North Rhine-Westphalia Availability: by arrangement Warranty: The machine is sold as-is at the time of delivery. The seller assumes no liability for defects. We reserve the right to prior sale, modifications, and repairs. Didn't find the right machine? Please contact us!