Used Defective for sale (967)

Condition: used, mileage: 418,082 km, Year of construction: 2007, Serial number: YS2P6X2000201xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21893 Specifications: 2007 model 418,082 km Manual transmission Euro 3 Chassis 6x2 420 hp L ft p 3 axle Defective gearbox Tip Engine starts and runs Flashing on the roof Heated mirrors Light Air conditioning/ac Tool cabinet Radio Delivery tray Description: We have a 2007 Scania P420 6x2 chassis w/ Tipper and defective gearbox for sale. The car starts and runs but has a defective gearbox. There are faults and deficiencies and some cost must be taken into account. Ready for delivery. Km: 418082 HK: 420 Technical approved: Yes EU-approved until: 20.06.2026 Own weight: 17700 Euro: 3 Model: P420 6x2 chassi m/ Tipp og defekt girkasse Bdjdpfxsxzaw Ns Aczok Gearbox: Manual

Condition: not inspected (used), Bosch Rexroth Type: SCARA SR6 control panel defective Bosch Rexroth swivel arm robot turbo SCARA SR6 with control unit Nominal load 2 kg Maximum load (sleeve ∅ 20 mm) 5 kg Maximum load (sleeve ∅ 25 mm) 8 kg Rated maximum mass moment of inertia (axis 4) 500 kgcm² Max. mass moment of inertia (axis 4) 1000 kgcm² Horizontal force, continuous/max. 60/150 N Bjdevx Taispfx Aczsdk Vertical force, continuous/max. 200/300 N Torque (axis 4), nominal/max. 5/10 Nm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: repair required (used), piston compressor, compressor -Compressor: without function, sold as spare part -Handover in the current condition as viewed -Volume flow: 340 l/min -Max. pressure: 10 bar Bdjdpsb A Sbwofx Aczek -Engine power: 4 kW -Tank capacity: 150 l -Dimensions: 1400/500/H900 mm -Weight: 180 kg

Condition: good (used), machine/vehicle number: 8607719 / 8412427, Equipment: rotational speed infinitely variable, 2x OZAKI lathes - 1x in working order; OSL-III 8607719 Bsdpfoxg R Nysx Aczjdk - 1x defective (for spare parts); OSL-III No. 8412427

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system Bjdsd Rmcmspfx Aczsdk

Condition: used, Year of construction: 2006, operating hours: 11,000 h, Serial number: K5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20786 Not certified Used as an unloading machine Registered in the machine register Approximately 11,000 hours Bdodpfjwvzmkjx Aczsk Sold without hp mount Sold without bucket Defective hydraulic pump Total width 298 cm Okay chassis Good sprocket Central lubrication 22,260 kg 110 kW Flashing roof Bunkering pump Old 2-axis laser Seat heating Ac Ready for delivery   Description: The machine has been used internally as an unloading machine. It ran out of oil one day and thus the hydraulic pump failed. Sold without hitch and bucket. Can be picked up on a trailer, owner is helpful with getting it on a trailer. Hours: 11000 Total Weight: 22260 Kw: 110

Condition: repair required (used), Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in the current condition as viewed -defective, not functional, problem: frequency converter does not communicate with the software -Delivery quantity: 3.2-6.9 m³/min -Engine power: 18-24 kW -Construction: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h Bdsdjhabk Dspfx Aczok -Load hours: 30754 h -Year of construction: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis Bjdpfx Aedzqmfjczodk - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: used, mileage: 585,000 km, Year of construction: 2007, Serial number: XLEP6X2000517xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21242 Specifications: Km: 585,000 Transmission: Automatic with clutch 6x2 Full air suspension Engine brake Euro 5, 420 hp Good tires Zepro lift, 2000 kg Remote control SKAB body 21-pallet box, inside hight is 260 Cooling/freezing unit (not working) Bunk Radio/CD Climate control/AC Servicing done at local workshop Video attached Ready for delivery Description:Scania P240 box truck from 2007.The truck has a 21-pallet box and is approved until 2026.Cooling/freezing unit is not working.Service and maintenance carried out at local workshops.Ready for delivery. Bodpow Ucldjfx Aczjdk Km: 585000 HK: 420 Technical approved: Yes EU-approved until: 10.04.2026 Own weight: 15500 Payload: 11425 Model: P420

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm Bjdpfx Acedpvwiozjdk -Dimensions: 550/250/H135 mm -Weight: 55 kg

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm Bjdpfxjd Hp Tzj Aczsdk -Weight: 416 kg

Year of construction: 1985, condition: used, Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm Bodpfji Huvhjx Aczsdk -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: used, three-phase motor, electric motor -Power: 2.2 kW Bdjdpfsdzz Eusx Aczok -Speed: 945 rpm -Remark: Foot holder partially defective, see photo -Shaft: Ø 28 x 60 mm -Design: B3 -Dimensions: 420/290/H220 mm -Weight: 42 kg

Condition: used, Electric motor, three-phase motor -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm Bjdpfx Aodzzhgoczedk -Weight: 30 kg

Condition: used, Electric motor, three-phase motor -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 Bjdedzzhiopfx Aczodk -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Bdodpfx Acjxyhnyezek Note: The MBO delivery unit is defective.

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: 1996 model Bdsdpfx Aexz N Ahoczok 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: used, Year of construction: 2006, fuel type: electric, Weights Empty weight: 7.300 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.500 cm CE mark: yes Condition General condition: average Bodsx A Aiwepfx Aczedk Technical condition: average Visual appearance: average Other information Operates with deficiencies: Yes Delivery terms: EXW Max. horizontal reach: 850 m Transport dimensions (LxWxH): 6,65x1,56x2,1 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA15IP Year of build: 2006 Condition: Used Data: Max. working height: 15,00 m Platform height: 13,00 m Max. reach: 8,50 m Platform lifting capacity: 230 kg Platform dimensions LxW: 0,80 x 1,20 m Swivel range: Vertical movement of 130° (+65° / -65°) Total dimensions LxWxH: 6,65 x 1,56 x 2,10 m Movable up to working height: 15,00 m Wheel pressure max.: 36 kN Ground clearance: 0,15 m Drive type: battery Own weight: 7.300 kg Special features: Rotating work basket, basket arm rotation angle +/- 70°, white tires, advantage: high lateral reach Information: Battery defective Location: 41468 Neuss immediately available

Condition: used, This listing is for 1 of 4 Eisai MIH-DX Inspection Hood. Bdsdpfxexx Ahfo Aczok The unit is in full working condition and is ready for immediate release. Elevate your quality control processes with the Eisai MIH-DX Inspection Hood, a premier standalone workstation designed specifically for the meticulous inspection of liquid-filled vials and ampoules. Ideal for clinical laboratories and the re-inspection of rejects from automated machines, this inspection hood ensures high-quality results in pharmaceutical applications. Key Features: Robust Construction: The MIH-DX features durable stainless steel construction, ensuring longevity and reliability in various laboratory environments. Optimized Lighting: Equipped with non-glare black and white backgrounds and two flicker-free fluorescent ballasts, this hood provides optimal lighting conditions for accurate particulate inspection. Versatile Application: Perfect for small volume and sensitive product production runs, the MIH-DX is also an excellent validation tool for other in-line semi-automatic inspection systems. Technical Specifications: Configuration: Standalone workstation Material: Stainless steel Lighting: Two flicker-free fluorescent ballasts Backgrounds: Non-glare black and white for enhanced visibility Benefits: High-Quality Inspection Results: Ensures precise detection of particulate matter and cosmetic defects, crucial for maintaining product integrity. Flexibility and Portability: The MIH-DX allows for easy integration into your existing workflow, providing a reliable inspection solution without the need for complex setups. Ideal for Various Applications: Whether used in clinical settings or during the re-work of rejects, this inspection hood adapts to your specific needs, enhancing operational efficiency. The Eisai MIH-DX Inspection Hood is the perfect choice for laboratories seeking a dependable and effective solution for inspecting pharmaceutical products. Invest in quality assurance and elevate your inspection processes today!

Year of construction: 2006, condition: repair required (used), functionality: not functional, machine/vehicle number: 059061003, No reserve price – guaranteed sale to the highest bidder! Bsdsxyfagepfx Aczjdk Bidding obligates timely collection by 31/12/2025! The offer includes: MBO T800.1/642/R (year of manufacture: 2006; serial number: 059061003) MBO Z-2 knife folding unit (year of manufacture: 2008; serial number: 82 06 10 09) MACHINE DETAILS Electrical specifications Mains voltage: 400/50 V3~ / Hz Control voltage: 24/25 V – / A Current consumption: 2.5 A Fuse rating: 16 A Note: Only units 2 & 3 as well as the knife folding unit are available. There is a defective electronic component at the delivery section. The feeder is missing.

Condition: used, machine/vehicle number: 01xxxx, Year of construction: 1988, operating hours: 13,584 h, Please contact ATS Norway for more information Please provide reference number upon request: 21361 Specifications: 1988 model 13584 hours Lifting capacity of 10 tons Lifting height: 5600 mm Tires (see pictures) Bdjdpfx Aexdryusczsk Net weight 15900 kg Hydraulic sideshift Hydraulic wide ding on forks Ready for delivery   Description: We have a 1988 Svetruck 1060 Forklift for sale. Services have been taken regularly by the owner. It hangs a little on the brakes when you drive it. Beyond this, it should function as it should. Errors and defects may occur as it is from 1988. Ready for delivery Hours: 13584 Own weight: 15900 Model: 1060

Condition: good (used), Year of construction: 1999, General information Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 2.150 kg Functional Bedoxzrwnspfx Aczedk Lifting capacity: 200 kg Lift height: 1.600 cm Working height: 1.800 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1000 m Max swing of arm in degrees: 360 Transport dimensions (LxWxH): 7,35x1,85x2,1 Production country: DK Additional information Please contact Christian Theißen for more information Manufacturer: Denka Lift Model: DL18 Year of build: 1999 Condition: Used Data: Max. working height: 18,00 m Platform height: 16,00 m Max. reach: 10,00 m Platform lifting capacity: 200 kg Platform dimensions LxW: 1,20 x 0,70 m Swivel range: 360° / endlos Transport dimensions LxWxH: 7,35 x 1,85 x 2,10 m Support width: 4,20 m Drive type: Battery / b230 V AC 50 Hz Engine power: 3 kW Own weight: 2.150 kg Special features: The armrest is rigid. Information: defective Location: 41468 Neuss immediately available

Condition: used, This listing is for a Sartorius Sartocheck 3 Plus Filter Integrity Tester. The unit is in full working condition and is ready for immediate release. The Sartorius Sartocheck 3 Plus Filter Integrity Tester is an advanced instrument designed for the precise testing of membrane filter systems, making it essential for biochemistry and pharmaceutical applications. Here’s a detailed breakdown of its features and specifications: Key Features: Microprocessor Control: Offers programmable protocols for testing filter systems, allowing users to store up to 60 programs directly and expand to 240 with a memory card. Integrity Testing: Designed to ensure the integrity of membrane filters, minimizing the risk of using defective cartridges. Comprehensive Testing Protocols: Includes a variety of tests such as: - Diffusion Test - Bubble Point Test - Combined Diffusion and Bubble Point Test - Water Intrusion Test - Water Flow Test - Pressure Drop Test - Multipoint Diffusion Test - Data Reporting: Generates complete paper reports to meet cGMP requirements, detailing: - Test parameters (pressure, time) - Results (net volume, pressure drop, evaluations) - Filter cartridges used and products tested - User-Friendly Cleaning Protocol: Provides on-screen instructions for cleaning, compatible with any cleaning reagent due to its stainless steel construction. Bdodpfsxxyarox Aczsk Manufacturer Specifications: Power Requirements:Operating Voltage: 100-240 V ±10% Phases: 1 Ph/N Grounding Conductor: Separate SL (yellow-green) Frequency: 47-63 Hz Protection Rating: IP 44, indicating resistance to dust and splashing water. Pressure Specifications: Maximum Operating Pressure: 10 bar g Operating Pressure: Minimum 4 bar g Internal Limit Pressure: 10 bar g Maximum Power Input: 74 Watts Installation: Must adhere to VDE regulations.

Condition: used, machine/vehicle number: 8xxxx, Year of construction: 1980, Please contact ATS Norway for more information Please provide reference number upon request: 20381 Specifications: - 1980 model - 3 Axles - Swing on 3 axles - Tires (see pictures) - Manual wider - Repair item - Forced steering on 3 axles - Ready for delivery Description: We have a 1980 Hafo 3 axle Well Trolley Repair Item for sale. Being sold as a repair item as it is in poor condition. Errors and defects occur and some additional costs must be expected. Ready for delivery Bdsdpfx Acjwi Rudozok Technical approved: no Own weight: 1600 Total Weight: 55000 Payload: 44170 Width: 250 Length: 1450 Model: 1980 Hafo 3 akslet Brønntralle ekt

Condition: good (used), Year of construction: 2019, Field of application: Freight transport GVW: 5.500 kg Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Sprinter ambulance Year of build: 2019 Condition: Used Data: Fuel type: Diesel Mileage: KM 203.232 Gear type: Automatik Engine power/displacement: 140KW / 2987 Total permissible weight: 5500 kg Environment badge: Green/ Euro 6 Bodpfx Acjxc Hqljzodk Colour: Color white with foil sticker Special features: Daytime running lights, automatic climate control, seats: 2 front / 3 rear, airbag, electric windows and side mirrors, central locking, auxiliary heating, ABS, ESP, CD radio, power steering, fog lights Equipment set-up: Horn speakers Martin system LED signaling system Accident data recorder Foot switch for alarm system Rearview camera Ambulance table with universal stretcher attachment Information: Engine damage and particle filter defective Location: 41468 Neuss immediately available