Used Defective for sale (1,101)

Condition: used, mileage: 891,000 km, power: 228 kW (309.99 HP), first registration: 01/2010, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 4x2, fuel: diesel, gearing type: automatic, Year of construction: 2010, The turbocharger is defective! (TURBOCHARGER DAMAGE) Not roadworthy! Otherwise, the engine and transmission are in good condition! Length of the box: 6.50 m Height of the box (inside): approx. 2.25 m Tsdet Tw Szspfx Al Ueb

Condition: used, axle configuration: 3 axles, first registration: 09/2013, Equipment: ABS, Lift axle, EDSCHA roof defective! Tsdpfx Asgqnczel Uob

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Handed over in its current condition, foot defective (see photos) -Speed: 165 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1 available Tedob S Tanepfx Al Uob - Price: per piece -Dimensions: 450/140/H200 mm -Weight: 18.3 kg

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline Tjdpfxemx Sl Tj Al Ueb

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Tsdox T Dgnepfx Al Usb Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information The machine is mounted on a beam and has not been connected to the mains since November 2025!The buyer purchases the item subject to the exclusion of any liability for material defects!The spindle was replaced in 2022 for approximately 20,000.00 euros!The spindle has clocked up only approximately 1,400 hours since then Technical Specification Through-spindle Coolant Yes

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 42 h, load capacity: 1,000 kg, lifting height: 2,890 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,900 mm, battery capacity: 150 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 570 mm, fork thickness: 55 mm, tire condition: 99 %, front tire type: polyurethane tires (non-marking), overall weight: 900 kg, total height: 1,900 mm, color: yellow, Equipment: UVV, Yale MS10 Reach Truck Year of manufacture: 2017 Only 42 operating hours! Battery new, replaced 12/2025 With UVV certification Load capacity: 1000 kg Tedpfx Aloyatc Rj Ueb at a load center of 600 mm Lifting height: 2890 mm Overall height: 1900 mm Fork dimensions: 1150x570x55 mm Battery: 24V 150Ah, new – 12/2025, incl. Aquamatic Turning radius: 1411 mm Weight: approx. 900 kg Drive type: Electric Accessories: - Charger - Aquamatic refill container Before delivery, we will have a new UVV inspection carried out. All prices are net plus VAT. Payment by prepayment, including any freight costs, within 14 days after the contract is concluded. If the purchase price is not paid in full within this period, the seller reserves the right to cancel the purchase contract. The sale is only made to business customers as defined in § 14 of the German Civil Code (BGB). The machine is sold with exclusion of liability for material defects. This exclusion does not apply to claims for damages arising from liability for material defects, which are based on a grossly negligent or intentional breach of the seller's or its vicarious agent's obligations, as well as in the event of injury to life, body and health. Any existing claims against third parties arising from liability for material defects are assigned to the buyer. Please understand that I cannot assume any liability for compliance with the safety regulations that may apply to you and are generally required for the sold machine and its components. Compliance with such safety regulations is the responsibility of the final operator. All contracts concluded by me are exclusively subject to the law of the Federal Republic of Germany, excluding the UN Convention on Contracts for the International Sale of Goods. Mannheim is agreed as the place of jurisdiction. All information is without guarantee, errors and omissions excepted, all dimensions are approximate. The offer is non-binding. The machine can be inspected by appointment. Changes and errors in the technical data, information and prices as well as sales are subject to change.

Condition: used, functionality: fully functional, machine/vehicle number: FN 55xxxx, Year of construction: 2017, operating hours: 5,789 h, load capacity: 4,500 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,640 mm, power: 55 kW (74.78 HP), fork length: 1,150 mm, empty load weight: 6,358 kg, total length: 3,070 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Chassis number: FN 55xxxx Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Gearbox: Hydrostatic manual switch Condition: Reconditioned without guarantee Technical condition: very good Front tyres type: Superelastic Front tyres size: SE 300-15 Rear tyres type: Superelastic Rear tyres size: SE 28x9-15 Description: technically and visually refurbished, UVV approved and serviced, without warranty/liability for material defects Side shift, attached (4100 kg load capacity at 500 mm LSP) 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, Todpfx Alovwhgue Ueb Solo pilot, interior mirror, additional air filter, quick couplings for 4th function, Load capacity 4100 kg with side shift, device has been refurbished by the manufacturer

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: Nr. 011, used inline automatic 3D solder paste inspection system (AOI) for SMT. Error pattern: Defective solder paste printing. Multiple machines available, year of manufacture 2011 – 2015. used inline automatic 3D inspection system (AOI) for populated PCBs. Fault types: Misplaced components, bent pins, etc. Several machines available, year of manufacture 2013 – 2016. Todpewzv Adjfx Al Ueb Please submit your offer price. Sale only within Europe (EU), incl. Turkey, Great Britain, and Switzerland. Technical specifications can be found in the handout. Sold without packaging; any warranty or guarantee is excluded. If you intend to dismantle the system yourself, please mention this in your offer. We do not assume any liability for the correctness of the technical data, for the completeness of accessories and tooling, or for compliance with the safety and environmental protection requirements specified in accident prevention regulations.

Condition: used, functionality: fully functional, machine/vehicle number: FN 55xxxx, Year of construction: 2017, operating hours: 6,620 h, load capacity: 2,000 kg, lifting height: 6,500 mm, free lift: 2,130 mm, fuel type: electric, mast type: triplex, construction height: 2,772 mm, fork length: 1,150 mm, empty load weight: 3,861 kg, total length: 1,995 mm, drive type: Elektro, construction width: 1,120 mm, Electric 3-wheel forklift Chassis number: FN 55xxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Non-marking Front tire size: SE 200/50-10, non-marking Rear tire type: Non-marking Rear tire size: SE 140/55-9, non-marking Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2026 Description: Serviced, technically and visually refurbished, safety inspection passed, sold as is/no warranty for defects Side shifter, integrated 3rd valve, work light rear, work light front, roof protection, windshield, impulse control, full free lift, rear window, steel door right, front headlights, tail lights and turn signals, non-marking tires (like new), Solo-Pilot, battery (06/2026) with Aquamatik, external charger included. Tsdpfx Alezc Ad Ae Usb

Condition: used, Year of construction: 2002, For sale: Junget / Biesse Rover 24 L CNC milling machine / machining center. Tedpfx Aszf E E Hol Ueb The machine is designed for professional processing of furniture panels, wooden components, plastics, and production components. It is suitable for carpentry workshops, companies producing furniture, kitchen elements, fronts, structural panels, PEHD components, and other parts requiring precise milling and drilling. The Biesse Rover 24 L is a robust CNC machining center equipped with a vacuum table, automatic tool changer, and a set of drilling spindles. The machine enables quick and repeatable performance of milling, vertical and horizontal drilling, and grooving operations. Technical specifications: Model: Junget / Biesse Rover 24 L Type: CNC milling machine / CNC machining center Machine dimensions: approx. 5.8 × 2.45 × 2.5 m Work table: vacuum X-axis travel: 4500 mm Y-axis travel: 1300 mm Z-axis travel: 180 mm Vacuum pump: 120 m³/h Control system: NC1000 Operating system: Windows XP Automatic tool changer: yes Vertical drilling spindles: 7 pcs Horizontal drilling spindles: 8 pcs Circular saw: for making grooves / slots, e.g., in fronts or furniture components Safety features: safety grid / safety mat Tools installed in the machine: included Applications: The machine is particularly well-suited for the production of furniture, kitchen cabinets, fronts, carcasses, base panels, and components requiring serial drilling and milling. The drill array allows for the simultaneous execution of several holes, which speeds up production and ensures dimensional repeatability. The machine was mainly used for processing PEHD1000 plastic, which confirms its versatility and the ability to work not only with wood-based materials but also with engineering plastics. Technical condition: The machine has been used. According to information from the previous owner, the device is functional, starts up, and has no known defects or reservations. The equipment is sold as used and is subject to verification by the buyer upon collection. Key advantages: * robust industrial construction, * large working area, * vacuum table, * automatic tool changer, * vertical and horizontal drilling spindles, * circular saw for grooves and slots, * ability to process panels, wood, and plastics, * good machine for the production of furniture and serial components. The machine is suitable for continued operation in a production plant, carpentry workshop, or company engaged in CNC machining.

Condition: not inspected (used), functionality: unexamined, Danfoss VLT 5027 – Type 175Z4136 1 defective unit in stock We have a wide range of Danfoss frequency inverters available, including this type: VLT 5027 175Z4136. We have added an overview with photos to this advertisement. Additionally, it is possible to request extra photos of a specific part. Feel free to send us a message for this. A PDF file has also been added, containing an overview of all Danfoss parts that we currently have in stock. Todpfx Ajzki Ngjl Ujb Do you have any questions or are you looking for a specific Danfoss part? Please feel free to contact us. We will be happy to assist you.

Condition: excellent (used), Here, we offer you an inspection system for crystalline silicon solar modules. Reliable quality assurance and process control throughout the entire solar module production. The Dr. Schenk SolarInspect series was developed to meet the specific requirements in the production of crystalline silicon solar modules. These ready-to-use vision systems provide reliable quality control for the entire ongoing production process. Furthermore, continuous monitoring of the production process allows for timely corrective measures to be taken in the event of process deviations. In the production of crystalline silicon solar modules, textured glass substrates are used instead of uncoated glass. Textured glass increases the transmission of sunlight. The optical signals in the vision system, triggered by the surface structure typically used for glass substrates in silicon solar modules, are often similar to or even stronger than those of the actual defect being inspected. Dr. Schenk has developed and manufactured SolarInspect, a system that specializes in the precise differentiation between glass structure and defects on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect glass defects and distinguish them from the glass structure. Reliable inspection of: - Uncoated incoming glass - Uncoated textured glass - Coated glass, e.g., AR (anti-reflective) coated - Layer application - Finished modules Detection of: - Sheet glass defects, e.g., bubbles, inclusions, scratches - Dimensions - Edge defects - Layer defects, homogeneity and thickness of AR-coated glass SolarInspect - Exceptional performance features: - Innovative and modular optical design - Low operating costs - Ready-to-use vision systems optimized for specific process step requirements - Customized solution for all types and sizes of solar modules - Repeatable detection and evaluation - User-friendly quality and analysis tools for production control and process analysis - Easy integration into new and existing lines - Industrially proven design Todpfx Aszdtgisl Uob Type: SolarInspect Condition: used Sale is ex works. Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: repair required (used), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Item description: For sale is a HAAKE RheoStress 6000 rotational rheometer from Thermo Scientific – a highly precise measuring instrument for the rheological characterization of various materials. Ideally suited for use in research, development or quality control. However, the device is not operational as the air bearing is defective. Technical specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 min⁻¹ Speed range (CS mode): 10⁻⁷ to 1500 min⁻¹ Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Todpfxszia Iws Al Ueb Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special features: Very high measurement accuracy due to low inertia Precise lifting device (0.5 µm setting accuracy) Modularly expandable (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, Various used rack milling cutters / rack group milling cutters from different manufacturers. Our asking prices are net, ex works, plus packaging costs, starting from €170. Individual prices as follows: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group milling cutter - Asking price €370 Module 0.7 - Group milling cutter - Asking price €380 Module 0.9 - TIN coating - Asking price €530 Module 1 - 2 units available - Group milling cutter - Asking price €390 Module 1.25 - Group milling cutter - Asking price €410 Module 1.5 - TIN coating - Asking price €750 Module 1.75 - Group milling cutter - Asking price €730 Module 2 - 4 flutes - one defect - 1.89 kg - Asking price €210 Module 2 - TIN coating - Asking price €770 Module 2.5 - 8 flutes - one defect - 13.52 kg - Asking price €470 Module 3 - one defect - 13.29 - Asking price €230 Module 3 - 7 flutes - Reground - 13.77 kg - Asking price €200 Module 3 - 3 flutes - Asking price €290 Module 3 - TIN coating - Asking price €520 Module 5 - 4 flutes - Reground - 12.15 kg - Asking price €170 Module 5 - 4 flutes TIN coating - Asking price €750 Module 6 - 3 flutes TIN coating - Asking price €760 Module 6 - 3 flutes TIN coating - Reground - 11.16 kg - Asking price €400 Module 7 - 3 flutes Reground - 11.41 kg - Asking price €430 Module 8 - 3 flutes Reground - 5.28 - Asking price €190 Module 8 - Reground - Asking price €450 Module 8 - TIN coating - Asking price €780 Module 10 - TIN coating - Asking price €790 Module 10 - Reground - Finished milling cutter - 0.515 kg - Asking price €320 Module 12 - 2 units - TIN coating - Finished milling cutter - Asking price €580 Module 13 - Finished milling cutter - Asking price €410 Module 14 - Reground - 5.18 kg - Asking price €240 Module 16 - Asking price €600 Module 16 - Reground - 5.14 kg - Asking price €300 Involute angle: 20° BPII-Ü Bore diameter [mm] 40; 50; Groove [mm] 10: 12 Width [mm] 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Tsdpfx Aoytrh Eel Ueb Outer diameter [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 flutes TIN coating - one defect - 10.18 kg - Asking price €510 Module 1 - 16 flutes TIN coating - Asking price €590 Module 1.5 - 9 flutes Group milling cutter 9 flutes - Asking price €560 Module 2 - Pin milling cutter - Asking price €390 Module 6 - Pin milling cutter - Asking price €640 Module 10 - TIN coating - Asking price €350 Involute angle 20° DIN 3972 II - Ü or DIN 3972 II Kl. A - Ü Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 52/60; 55/85; 60/90; 33/40 Outer diameter [mm] 176; 200; 198; 199 Manufacturer: Klingelnberg Module 2.5 - Asking price €360 Module 2.75 - Asking price €380 Module 3.25 - Asking price €170 Module 3.75 - Asking price €200 Module 4.5 - Asking price €220 Involute angle 20° Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm] 148; 149; 150 Subject to typing and calculation errors. Sales are exclusively within the EU countries.

Condition: not inspected (used), functionality: unexamined, Danfoss VLT 5027 – Type 175Z4137 Todpfx Alezkrz So Usb One defective unit in stock We have a large stock of Danfoss frequency converters available, including this type: VLT 5027 175Z4137. We have added an overview with photos to this advertisement. Additionally, you can request extra photos of a specific component. Feel free to send us a message for this. A PDF file has also been added, containing an overview of all Danfoss parts that we currently have in stock. Do you have any questions or are you looking for a specific Danfoss part? Please feel free to contact us. We will be happy to assist you.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. A used machine from a site closure is being sold. Tsdpfx Alozrb Sps Usb Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the very end.

Condition: not inspected (used), Year of construction: 1991, operating hours: 108,378 h, functionality: unexamined, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 20,200 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Tsdpfezrczlsx Al Ujb The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43222, clamping force: 2,750 kN, screw diameter: 70 mm, injection pressure: 1,441 bar, total height: 2,500 mm, overall weight: 20,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end. Tedpfx Aezrdhysl Usb

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Tjdpfx Aljzrd Aqo Ujb The machine has not been inspected but was in working order until the end.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, power of the servo motor: 5 W, pneumatic connection: 6 bar, Production capabilities and applications This automatic edging machine centralizes the complete finishing of quilts into a single operation. In practice, on your production line, you move from the quilted panel to the finished product without multiple handling steps between workstations. You can process white or colored quilts in various formats, with few intermediate adjustments. What truly changes in production is the consistent pace and the reduction in handling, which minimizes edging defects. Todozmpvlepfx Al Usb Automated bias tape application system This machine is equipped with 2 MAR180059 devices dedicated to bias tape application. The bias tape is guided consistently thanks to the compensated foot-driven system, which ensures secure stitching on the varying thicknesses of a quilt. Indicative production rate: 60 sec/piece Bias tape width: with Pegasus head, max 45mm / min 30mm Quilt dimensions: from 1x1m to 2.6x2.6m (standard) Table dimensions: 3000x4000 mm Power supply: 380V 50Hz Installed power: 5 kW Compressed air: 6 bar, approx. 6-8 L/piece Two versions available: lockstitch (Dürkopp 867 head) or chain stitch (Pegasus EXT3216H head modified by Rimac) Programming via touchscreen, automatic dimension recognition, application of one or two labels, thread/label/bias tape monitoring with alarm, integrated waste suction.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. Tsdpozmrf Nofx Al Usb A linear robot is included, but it has never been used and was probably not programmed.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2001, load capacity: 1,500 kg, load center: 500 mm, fuel type: electric, battery voltage: 48 V, color: yellow, We are offering this Jungheinrich EFG-DF15MPG+E98-310ZZ front forklift, manufactured in 2001, which requires repairs. The battery is defective, but otherwise it is in working order. No warranty. Load capacity: 1500 kg Load center: 500 mm Battery voltage: 48 V Battery capacity: 400–480 Ah Year of manufacture: 2001 Tsdpszr Rxfjfx Al Usb If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1996, INDEX ABC multi-spindle automatic lathe with INDEX control system, serial number 400923, year of manufacture 1996, operating hours estimated at approximately 57,805 hours according to management; chip conveyor by KNOLL; bar feeder FMB Turbo 5-42/3200; known damage and defects: defective. Tsdpfjztc N Eex Al Usb

Condition: used, Year of construction: 2000, Equipment: all wheel drive, Due to the large number of dubious emails, we will not be responding to them. Tsdpfx Asztlg Hol Uob WhatsApp: Drive axle defective Fully operational and ready for use Available by arrangement / still in use "ERRORS, TYPOS AND PRIOR SALE EXCLUDED"

Condition: used, Year of construction: 2017, functionality: fully functional, GF+ FORM 300 – EDM machine with WorkPartner 1+ automation For sale is a high-quality GF+ FORM 300 EDM machine with automated workpiece/electrode handling system WorkPartner 1+ automation, manufactured in 2017. The machine is from GF Machining Solutions (Georg Fischer) and is particularly suitable for the precise machining of demanding workpieces in the tool and die making industry. Machine features: • Manufacturer: GF Machining Solutions / GF+ • Type: FORM 300 • Automation: WorkPartner 1+ • Process: Ram EDM • Robust and precise design for professional production use • Automated loading through WorkPartner 1+ • Integrated machine control • Suitable for tool and die making, as well as demanding precision machining Tedpfx Aoztn Adol Usb The depicted system is located in an industrial production environment and is in used condition, as shown in the pictures. The combination of GF+ FORM 300 and WorkPartner 1+ enables an efficient, automated production process and reduces manual intervention. This is particularly interesting for companies that want to expand their EDM capacity or implement an automated ram EDM solution. The machine can be inspected at any time, but it has already been dismantled and is no longer connected to the power grid. Therefore, a functional demonstration is not possible. The pallets and electrode holders can be purchased separately. Important note: The operating hours will be provided later, but the machine has hardly been used. Price: on request Inspection: possible by appointment Sale is preferred to commercial enterprises. The machine is sold used. Sale excludes any warranty for defects. All information is provided to the best of our knowledge, but without guarantee. Errors, prior sales, and changes reserved.