Used Defect for sale (1,084)

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Hnodez Nir Ropfx Andju Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: used, Bosch Rexroth Type: SCARA SR6, control panel defective Bosch Rexroth pivoting arm robot, turbo SCARA SR6 with control unit Rated load: 2 kg Maximum load (sleeve diameter 20 mm): 5 kg Maximum load (sleeve diameter 25 mm): 8 kg Rated maximum moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Hedpfx Anezh U R Rodenu Horizontal force, continuous/maximum: 60/150 N Vertical force, continuous/maximum: 200/300 N Torque (axis 4), rated/maximum: 5/10 Nm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, type of input current: three-phase, input voltage: 380 V, total length: 1,800 mm, total width: 1,500 mm, total height: 2,550 mm, inner diameter: 320 mm, workpiece height (max.): 75 mm, grinding wheel diameter: 720 mm, overall weight: 2,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine Used 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine for Sale – 720mm Grinding Wheels – 6 Carriers – Siemens SIMATIC Touch Control – Coolant Filtration System Manufacturer: Lapmaster International Model: DSG 720 Machine Type: Double Side Fine Grinding Machine Year: 2014 Control: Siemens SIMATIC Touch Control Condition: In storage, Functional but top grinding plate damaged. Machine Description The Lapmaster DSG720 is a precision double-sided fine grinding machine designed to process both parallel faces of components simultaneously. This type of machine is suited to applications requiring close control of flatness, parallelism, thickness and surface finish. This machine is equipped with 720mm outside-diameter grinding wheels, a 6-carrier workholding system, independently controlled upper and lower grinding wheel speeds and a Siemens SIMATIC touchscreen control. Important Condition Note The top grinding plate / upper grinding wheel assembly is damaged and requires replacement. The machine is therefore being offered with this known defect clearly disclosed. Prospective purchasers should allow for the replacement of the top grinding plate before returning the machine to normal production use. Main Specifications Manufacturer: Lapmaster International Model: DSG 720 Year: 2014 Machine Type: Double Side Fine Grinding Machine / Double-Sided Grinding Machine Grinding System Grinding Wheel Outside Diameter: Approx. 720mm Grinding Wheel Inside Diameter: Approx. 320mm Wheel Size: Ø720 x Ø320mm Number of Workpiece Carriers: 6 Upper Grinding Wheel Speed: 0–130 rpm Lower Grinding Wheel Speed: 0–130 rpm Inner Pin Ring Speed: 0–100 rpm The double-sided grinding arrangement allows both sides of suitable components to be processed simultaneously, helping achieve consistent component thickness and parallelism. Electrical Specifications Operating Voltage: AC 380V, 3 Phase Frequency: 50Hz Installed Power: Approx. 18kW Current: Approx. 50A Pneumatic Requirements Normal Air Supply: Approx. 5–6 kg/cm² / 0.5–0.6MPa Minimum Working Pressure: Approx. 4 kg/cm² / 0.4MPa Siemens SIMATIC Touchscreen Control: The machine is equipped with a Siemens SIMATIC touchscreen operator control. Coolant Filtration System Included: The Lapmaster DSG 720 is supplied with a separate coolant filtration system. Approximate Machine Dimensions Machine Width: Approx. 1,800mm Machine Depth: Approx. 1,500mm Machine Height: Approx. 2,550mm Net Machine Weight: Approx. 2,800kg Key Features 2014 machine Lapmaster International DSG 720 Double-sided fine grinding process Ø720mm outer-diameter grinding wheels Ø320mm grinding wheel inner diameter 6 workpiece carriers Upper wheel speed 0–130 rpm Lower wheel speed 0–130 rpm Inner pin ring speed 0–100 rpm Hnsdjz E A Icspfx Andeu Siemens SIMATIC touchscreen control Separate coolant filtration system Feed Tables Included 18kW installed power 380V, 3-phase, 50Hz Approx. 2,800kg machine weight Precision simultaneous grinding of both component faces Please Note: All specifications, dimensions, capacities and machine details quoted above are approximate and are provided for guidance only. Prospective purchasers should verify all important specifications, machine condition, tooling requirements and operating requirements prior to purchase.

Condition: used, Oxford Instruments   Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – for spare parts / defective   Item Description:   For sale is a used X-ray Fluorescence Analyzer, type Oxford Instruments X-Strata 960. The unit comes from a laboratory decommissioning and is offered exclusively as a source of spare parts or for repair purposes. No functional testing has been performed – therefore, the unit is considered defective for the purposes of this sale.   Technical Data – Oxford Instruments X-Strata 960 (non-binding)   Feature Description Model X-Strata 960 Manufacturer Oxford Instruments Analysis Method X-ray Fluorescence Analysis (XRF) Application Areas Coating thickness measurement, material analysis, precious metal testing Measurement Geometry Top- or bottom-irradiating, depending on configuration Radiation Source X-ray tube (e.g., rhodium anode), 50–100 W power Detector Proportional counter or silicon drift detector (SDD), depending on version Measurement Range Coating thickness approx. 0.005 – 50 µm (material dependent) Spot Size approx. 15 μm – 1 mm (depending on collimator) Z-Axis Motorized, adjustable up to approx. 230 mm measurement height Sample Chamber (W × D × H) approx. 580 × 510 × 230 mm Sample Table Manual or motorized (200 × 200 mm or larger, depending on equipment) Focusing System Optical / laser focus, partially automatic Operating System Integrated industrial PC with Windows-based evaluation software Voltage Supply 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight approx. 150–200 kg (depending on version)   Condition: used / defective / for spare parts   Scope of Delivery: as shown in the images – without accessories or software   Important Notes:   Sold expressly as a defective unit without any warranty of functionality. The item is offered as a source of spare parts or for hobbyists. No warranty on function, completeness or technical parameters.   Commercial sale with exclusion of any liability for defects, in accordance with § 447 BGB (distance selling contract).   Scope of Delivery:   Oxford Instruments X-Strata 960 All components visible in the images Other parts, accessories or documentation are not included, unless explicitly stated.   Shipping & Pickup:   Pickup possible and preferred in Borken Shipping possible upon agreement.   (Changes and errors in the technical data are subject to change!) Hnodpfx Anozdzifsdou   We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 391,171 km, power: 75 kW (101.97 HP), first registration: 09/2009, fuel type: diesel, fuel: diesel, color: black, gearing type: mechanical, emission class: euro4, Despite our care in ensuring the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Hnodpfxoz S Nw Sj Andou Images may differ from the actual vehicle. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further Information = Year of manufacture: 2009 Engine displacement: 1,896 cc Unladen weight: 2,000 kg Payload: 600 kg GVW: 2,600 kg Body manufacturer: CARRIER Damage: Damaged vehicle (not roadworthy) Please contact Thierry Leemans for further information.

Condition: defective spare-parts repository (used), functionality: not functional, Due to warehouse clearance and stock reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquette press / briquetting press / metal press Briquette press for compacting metal chips, wood chips, etc. No. 5 Manufacturer: COMAFER Type: Metapress 400 Briquette diameter approx. 70 mm Briquette length approx. 60-100 mm Motor power approx. 22 kW The machine comes from a batch of such presses. Another identical machine is still available. The sale is expressly as defective, as a source of spare parts, or for rebuilding by hobbyists for export, etc. Various spare parts for this machine type are still in stock. If both machines are purchased as a package, the spare parts can be included. Condition: see pictures. (See pictures – a prior inspection is expressly desired; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale.) All information without guarantee. The machines can be picked up by the buyer or shipped via freight forwarder at the buyer’s expense. Loading and/or packaging can be organized by us. The shipping costs are an estimate; depending on the distance and unloading possibilities, these may vary; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Hsdez Efu Sjpfx Andjnu Warranty basis: Due to age and wear, the sale is exclusively to commercial businesses without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: repair required (used), machine/vehicle number: 515054000261, Year of construction: 2003, load capacity: 1,500 kg, lifting height: 4,320 mm, free lift: 1,330 mm, fuel type: electric, battery voltage: 24 V, fork length: 1,000 mm, empty load weight: 2,221 kg, STILL RX50-15 electric three-wheel forklift for internal material handling, with a load capacity of 1,500 kg, a lifting height of 4,320 mm, and a STILL charger. IMPORTANT: BATTERY DEFECTIVE The 24V traction battery is defective or deeply discharged. The forklift is explicitly offered as requiring repair. Lifting and lowering under power cannot be demonstrated at this time. TECHNICAL DATA Manufacturer: STILL Model: RX50-15 Year of manufacture: 2003 Serial number: 515054000261 Load capacity: 1,500 kg according to the data plate Lifting height: 4,320 mm Free lift: 1,330 mm Fork length: 1,000 mm Unladen weight according to the data plate: 2,221 kg Drive power: 4.0 kW Battery voltage: 24 V; Battery type: PzS CONDITION AND MAINTENANCE In operation until June 2025, after which the battery failed. According to the latest condition report, the hydraulics and mast have no known functional defects; however, a current functional test is not possible due to the defective battery. Rear tires renewed in 2024; front wheels show signs of use. Oil and brake fluid were changed in 2024, according to the information provided; the driver's seat was replaced in 2021. Hnodpfjz Hcrkjx Andsu DELIVERY AND COLLECTION Forklift including STILL charger, 24 V / 120 A. Location: 65618 Selters (Taunus), Germany. Inspection by appointment. On-site assistance is available for moving the forklift to the loading ramp and for loading. The buyer is responsible for organizing the transport. Price: 2,875 EUR net, negotiable, plus statutory VAT. Reference: RQ424391-10

Condition: used, Vickers Type: HVS 1000 The digital micro-Vickers hardness tester HVS 1000 features a unique and precise design in the areas of mechanics, optics, and light source, and is capable of producing a clearer image of the indentation, resulting in more accurate measurements. Main purpose and scope of application: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet metal, microstructures 2. Carburized, nitrided, and decarburized layers, surface hardening layers, plating, coatings 3. Glass, wafers, ceramic materials Specifications: Model HVS1000 Type Digital micro-hardness tester Test forces (N) 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test forces (Kgf) 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load control Automatic loading and release Objective-indenter turret Manual Dwell time (s) 0~60 Microscope magnification x 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm) 0.01 Hjdpszgbr Sjfx Andsnu Test range 5 HV~3000 HV Dimensions of the XY test table 100X100 mm Travel range of the XY test table 25X25 mm Max. specimen height 120mm Max. specimen width 110mm Hardness conversion HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output Built-in printer, RS232 interface Power 220V, 60/50Hz Dimensions (mm) 441 x 270 x 480 Net weight (/ kg) 35 Condition: used / defective, for spare parts Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: defective spare-parts repository (used), Year of construction: 2021, operating hours: 1 h, machine/vehicle number: 101780.0, Defective Kaeser Aircenter SX 6 – 11 bar rotary screw compressor with integrated refrigeration dryer with 200-liter air receiver with Sigma Control 2 controller with Kaeser F6KE filter incl. ECO-DRAIN with Kaeser F6KA activated carbon filter The compressor is functional, but the screw airend makes loud noises. Therefore, the system is sold as defective / for parts. Year of construction: 11/2021 Operating hours: 981 h Max. pressure: 11 bar Rated power: 4.0 kW Free air delivery (FAD) at 10 bar: 0.49 m³/min Sound level: 61 dB(A) Air outlet: 3/4" Air receiver: 200-liter capacity Hnodpfx Aez Sz Tfendju Pressure dew point (refrigeration dryer): + 3°C Condensate drain: level-controlled ECO-DRAIN Dimensions (L x W x H): 590 x 1090 x 1560 mm Weight: 290 kg Convenient leasing options available for new machines via our house bank. Visit our retail store. We always stock a large selection of new and used compressors!

Condition: used, mileage: 174,540 km, power: 77 kW (104.69 HP), first registration: 07/2017, fuel type: diesel, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, immobilizer system, soot filter, * 5,900 EUR NET * Transit Custom 2.0 TdCi L1H1, 9 seats, sliding door, ENGINE DEFECT, air conditioning, Euro 6 * 9 seats (3+3+3) * 6-speed * Armrest * Radio CD * Front airbags * Cruise control * Air conditioning * Start/Stop system * Multifunction steering wheel * On-board computer * USB * Electric windows * Electric mirrors * Sliding door on the right * Central locking * Tire pressure monitoring system * Isofix * ABS * ESP * Parking assistance system front + rear (PDC) * Fog lights * Wheelbase 293 cm * Unladen weight 1945 kg * Payload 1195 kg * Permissible total weight 3140 kg * Passenger car registration * Vehicle number: ????ENGINE DAMAGE - ENGINE DEFECT????? ????ENGINE BROKEN - ENGINE DEFECT????? ????ENGINE FAILURE???? OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT INFORMATION Phone: WhatsApp Email: Transfer and customs registration plates (export number) available from us. Subject to errors, typos and prior sale. Technical specifications and features are to be checked separately. The condition of the vehicle as per the contract is only that which is inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment. Hodpfx Aezbgk Djndsnu

Condition: defective spare-parts repository (used), functionality: not functional, machine/vehicle number: 2823-3039, type of input current: three-phase, input voltage: 380 V, Universal tool milling machine Deckel FP 5 A with Deckel Dialog 11 control (DEFECTIVE) The machine is defective and is sold in its current condition. Type FP5A, No. 2823-3039, serial no. 27613. Hodoz A Uh Aepfx Andenu Connection: 3 x 380 V, 50/60 Hz, rated current 33 A, control voltage 42/48 V and 24 V, maximum fuse rating 50 A. Fully enclosed work area with sliding doors, T-slot table, vertical milling spindle, telescopic guards, coolant supply, electronic handwheel on the control panel. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; disassembly and loading by arrangement. All information without guarantee.

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel Hnjdpfx Aez Ebvrjndju - Fixed angular table - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: used, empty load weight: 6,100 kg, maximum load weight: 11,900 kg, overall weight: 18,000 kg, first registration: 05/2014, total width: 2,550 mm, Equipment: ABS, EBS, cooling unit, Key Features Internal Reference: 25493M Chassis Number: AH1 814 870 8143 77 Serial Number: 313.453.923 Vehicle Model: AH18 Carrier Supra 950 TK Vehicle Make: FABAG Product Category: Refrigerated Trailer Condition: Used Date of First Registration: 05/15/2014 Last Inspection (MOT/TÜV): 04/30/2025 Suspension: Air-Air Cab Vehicle Equipment: ABS, EBS Axles & Tires Axle Configuration: - Axle 1: 385/55 R22.5, Disc brakes, Air suspension Axle 2: 385/55 R22.5, Disc brakes, Air suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight (GVW): 18000 Payload: 11900 Unladen Weight: 6100 Vehicle Width: 2550 Body Body Manufacturer: Fabag Body Year of Manufacture: 2014 Refrigeration Unit Refrigeration Unit Make: Carrier Zones: 2-zone Suitable for Frozen Goods: Yes Hedsz Hrl Hepfx Andjnu Refrigeration Unit Year: 2014

Condition: defective spare-parts repository (used), Year of construction: 1994, functionality: not functional, We are selling an industrial robot, type IRB 1500, with an S3 controller from ABB Robotics, manufactured in 07/1994. The unit is defective/not operational and displays the following error messages (see photos): - 506 Servo error 2 - 536 Motor overload error The robot can be moved slightly intermittently until the error messages reappear. Hnsdpfx Anjzh Uvgodou We are selling the robot as a complete package, including the control cabinet, operator panel, and metal frame. Individual parts are not for sale. Please note that we offer neither a guarantee nor a warranty. Returns after purchase are not possible. After the purchase, the robot can be collected by appointment during our business hours. If required, we will gladly assist with loading. Selling price: €3,250 (negotiable) plus VAT.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Hnsdpfx Anez A Ia Sodeu Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS with back gauge Weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Hsdpfjzd Uqcjx Andsnu Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RPTC 0163, workpiece weight (max.): 16 kg, total width: 750 mm, total length: 1,560 mm, total height: 1,660 mm, input current: 5 A, input voltage: 230 V, Schenck TB Comfort dynamic balancing machine for rotors. The machine is in perfect working order and is currently in use (operation is performed using a computer mouse; the touch function on the display does not work – this is a factory defect of these monitors). Hnedpfx Anoz R Tc Rjdsu The balancing machine is sold with standard supports for balancing rotors with a total weight of up to 5 kg, and with an optional set of supports for balancing rotors with a total weight of up to 16 kg.

Condition: used, Year of construction: 2011, operating hours: 11,591 h, functionality: fully functional, machine/vehicle number: B610, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2011. The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – provides precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Air blow system – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on dealer commission costs. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical data – Cronoplast 6/10P Screw / Injection unit Technical data - Cronoplast 6/10P Plasticizing unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejection force 5 kN - Ejection stroke 45 mm Dimensions: - Weight including frame approx. 350 kg Hnsdjytgmvopfx Andou - L x W x H: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, turning length: 500 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, spindle bore: 26 mm, bar diameter (max.): 26 mm, operating pressure: 60 bar, Machine in production under power, no defects, can be inspected in production. Equipement: - 2x spindle - 2x C axsis - live tools for main and sub spindle - swarf coveyour - Iemca bar feeder - high pressure pump - Siemens controller - all books and manuals Hnedpsz Smfuofx Andsu

Condition: used, mileage: 208,851 km, power: 89 kW (121.01 HP), first registration: 06/2017, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,450 mm, total width: 1,900 mm, total height: 1,950 mm, loading space length: 2,700 mm, loading space width: 1,590 mm, loading space height: 1,340 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition Hnodpfx Anjzylmaedou = Notes = Configuration: 4x2, Payload: 1305 kg, Unladen weight: 1725 kg, Gross vehicle weight: 3030 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Lighting type: Halogen lamp, Bluetooth, Engine power: 89 kW (119 hp), Number of cylinders: 4, Displacement: 1598 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L2 Engine defect!, Spare wheel, Tire type: All-season tires = Further Information = General Information Number of doors: 1 License plate: V-382-GZ Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 1 mm; Tire tread depth right: 2 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,725 kg Payload: 1,305 kg GVWR: 3,030 kg Functional Loading area height: 56 cm Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Spindle hours: approx. 37,695 h Max. spindle speed: 5,000 rpm Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Hedpfoz Nxcxox Andsnu Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Inspection and functional testing possible by appointment Price net. VAT can be shown separately.

Condition: used, Year of construction: 2012, Used machine Nesting cell Year of construction: 2012 Gantry machine in Gnatry design Working area in X = 4300 mm Working area in Y = 2250 mm Working area in Z = 125 mm Travel speed X - Y - Z-axis 100 - 100 - 20 m/min with grid table and sacrificial plate with 3 vacuum pumps, each with 300 m³/h (one of them from 2026) Spindle motor 12 kW with torque support and C-axis with Homag Flex 5 tool interface Hsdpfx Ansz Rrbqodsnu Tool clamping system HSK-F 63 Tool changer with 14 tool positions Loading with vacuum lifter and roller conveyor Unloading with conveyor belt with manual label printer Safety device: stepping mat Caution! Drilling head is defective! Availability: approximately July 2027 Location: North Rhine-Westphalia

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, J. Neu Piccolo EP 150 oscillating panel saw, manufactured in 2021, in like-new condition. The original saw blade is still installed, and the saw has been used for a maximum of 20 hours. Therefore, it is in very good condition! Equipped with infeed and outfeed roller conveyors: 600 cm each. Power: 3.7 kW Saw blade: max. 500 mm (30 mm bore) Cutting height: 150 mm Optionally, a matching dust extraction unit from Holzkraft RLA 140 (manufactured in 2023) can also be purchased (see last picture). The machine can, of course, be inspected while powered on and thoroughly tested. Hsdpfx Aoz It Ewsndsnu The sale is to business customers only and excludes any warranty for defects. No guarantee, warranty, or right of return.

Condition: used, Year of construction: 1978, functionality: limited functionality, year of last overhaul: 2017, We are offering this used Klingelnberg AGW 231, manufactured in 1978. It was overhauled in 2017. Manufacturer: W. Ferd. Klingelnberg Söhne Remscheid Type: AGW 231 Serial number: 3419 Year of manufacture: 1978 Hnjdpoz Rx N Iefx Andou The machine was overhauled in 2017 and equipped with a PLC control system. However, this control system no longer functions because the memory is defective. The machine is mechanically complete and includes change gears and indexing plates. If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RERS 0193, workpiece weight (max.): 16 kg, total width: 820 mm, total length: 1,940 mm, total height: 1,660 mm, input current: 6 A, input voltage: 230 V, Schenck TB Sonio high-speed balancing machine for turbocharger rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen function does not work – this is a factory defect of these monitors). The balancing machine is sold with 83 adapters for balancing turbines. Hedpfx Anjz R Nq Rjdenu