Used Defective for sale (1,072)

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Iodjzvghkepfx Aaxetk

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. Iodpfozi Svmjx Aaxotk I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. We didn't use it much because we mostly print on our plotter. Inspection is possible.

Year of construction: 2018, condition: used, functionality: fully functional, This combination oven steamer from the manufacturer Rational is a CombiMaster® with 8 x 1/1 gastronorm trays in an electric version, allowing you to load the unit with deeper GN containers per tray. (It can also be converted to a 10-tray rack.) This combination oven steamer was primarily used for heating packaged food and is therefore in very good used condition. The combination oven steamer is from the 2018 model year. The unit has undergone an inspection in our in-house workshop and is fully functional. The base frame shown in the picture is not included in the offer but can be purchased as an option. These are example photos; actual photos will follow shortly. Available from week 32. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Iedpfx Aajzpvbgoxjtk The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042mm Minimum door opening dimensions for transport W x H: 845x1050mm Capacity: 8 x 1/1 GN Power connection: V: 400 / kW: 18.6 / Hz: 50-60 Weight: approx. 143kg Serial number: E11MI18072681444 Year of manufacture: 2018 Condition: used, inspected, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled food to the optimal serving temperature in the best climate. Automatic separation of fat for clean cooking chamber air. Semi-automatic cleaning program (see image sequence). 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food. Ventilated 2-pane glass (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement by means of a sensor Cool-down function High-performance fresh steam generator (automatic flushing and emptying) Handheld spray nozzle with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, Itedpfxezkbpfj Aaxek - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, - complete set of robot cables. The robot has the following licenses: Advanced Robot Motion, Absolute Accuracy, PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Condition: used We provide a start-up guarantee.

Condition: repair required (used), functionality: not functional, Year of construction: 2006, operating hours: 9,455 h, load capacity: 1,400 kg, battery voltage: 24 V, battery weight: 274 kg, Ameise Jungheinrich ERC 214 Itsdpfey Dg N Hox Aaxok The pallet truck is currently not operational: Drive switch defective, new battery required General terms and conditions for the offer: - 100% payment in advance, net without deduction, before dismantling begins and upon receipt of invoice. - The equipment remains our property until full payment has been received. - The purchaser may withdraw from the purchase agreement at any time in writing and without stating reasons until full payment has been made. - Ex stock location, the buyer is responsible for organizing dismantling, loading, and transport of the equipment at their own expense. - The buyer is responsible for proper dismantling and commissioning. - The buyer undertakes to contract only qualified specialists for dismantling. - Dates must be coordinated with KT and adapted to the plant’s operating hours. - Dismantling must be completed entirely up to the supply lines. - All site safety regulations must be observed. - The equipment is sold as inspected and in its current condition, without any guarantee or warranty for material or cosmetic defects.

Condition: good (used), Year of construction: 1998, functionality: fully functional, PLEASE NOTE: If you purchase on August 10, 2026, or August 11, 2026, you will receive an additional discount. Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 Max. wire diameter: 12 mm Max. wire cross-section: 115 mm Iedpfx Aaszd Da Hexstk Max. ejector length: 90 mm Max. ejector on the punch side: 20 mm Motor: approx. 15 kW Max. output: 160 pieces/min, depending on the part to be produced Station 3: optional deburring or forming Press Biauli BF17B, year of manufacture 1998, 13 tons Oil pan: 424 kg Conveyor belt: 199 kg Control cabinet: 205 kg Platform: 186 kg Machine parts/accessories: 565 kg We sell the above items with the exclusion of any warranty for defects in materials and workmanship and without guaranteeing functionality or dimensional accuracy. We are not aware of any major defects, and the machine has functioned perfectly until recently.

Condition: used, Year of construction: 2023, operating hours: 600 h, functionality: fully functional, power: 55.16 kW (75.00 HP), overall weight: 3,500 kg, The BBT 400 Woodzilla is a compact, powerful, and mobile drum chipper with aggressive feed, mounted on a 3.5-ton tandem trailer chassis and capable of 360° rotation. Technical Data Year of manufacture: 2023 Operating hours: approx. 600 hours Power: Diesel, Deutz TCD 2.9, 55 kW (75 HP), Stage 5 Feed opening: 320 x 500 mm Drum size: 400 x 500 mm, 4 knives Maximum log diameter: 32 cm Stabilisation: 4-way hydraulic support Z-crane Ben-Tele 550 Itjdpjykzlzsfx Aaxek Crane outreach: 5,500 mm Telescopic stroke: 1,100 mm Radio remote control for chipper and crane Brake system: Overrun brake Weight: 3,500 kg The machine is in good visual and technical condition. Location: North Rhine-Westphalia Availability: by arrangement Warranty: The machine is sold as-is at the time of delivery. The seller assumes no liability for defects. We reserve the right to prior sale, modifications, and repairs. Didn't find the right machine? Please contact us!

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Itjdpfx Aezdqdlsaxjk Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Year of construction: 2025, condition: used, functionality: fully functional, This is a glasswashing machine from the manufacturer Hobart, model GXCROI-10C, manufactured in 2025. This compact professional dishwasher is equipped with an integrated osmosis system and a base unit for empty racks or detergent, as well as suction lances for monitoring the fill level. The glasswashing machine has been inspected in our in-house workshop and is fully functional and in near-new condition. The list price of the machine in this configuration is €13,285.16 (gross). You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality brand-name equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating instructions, connection diagrams & spare parts. Testing according to DGUV V3 Technical data: External dimensions WxDxH: 600 x 600 x 1260 mm Electrical connection: 400V / 50 Hz, 6.8 kW Year of manufacture: 2025 60/90/120 sec. and special programs Water consumption: 2L/rack Tank capacity: 60 liters Rack size: 500 x 500 mm Loading height: 305 mm Condition: Used, inspected and fully functional Base model: Front-loading machine Theoretical capacity up to 60 racks/h, 2,160 glasses/h 7 automatic programs: short, standard, cold rinse, hygiene, basic cleaning, intensive program, E-Save Automatic self-cleaning program Wash pump with soft start Integrated WLAN module Completely ready for connection: inlet and outlet hoses, connection cable (400 V connection), liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Multi-phasing: Machine can be switched from 400 V to 230 V on-site Shock-absorbing door with self-closing mechanism Tank, sump, cladding made of CrNi steel 1.4301 Universal glass rack 00-378814-000: 500 x 530 mm With base unit: 435 mm high, with removable door, CrNi steel 18/9, space for 2 empty racks or detergent Customer benefits: Compact design, installation height of only 705 mm / with integrated osmosis only 820 mm Self-cleaning washing system VISOTRONIC-TOUCH control SmartConnect app SENSO-ACTIVE resource management CLIP-IN washing and rinsing system Intelligent data storage USB interface GENIUS-X2 fine filter system Cold rinse Intensive program Screen insert control Optional fill level indicator Hygiene program in combination with the Hygiene Tab INTENSIVE Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Itsdey Uvuaepfx Aaxjk Subject to changes and errors. Do you have any questions, would you like to request advice or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS Smoothing Machine 19.06.6512 TYPE TF/P Plus Max. working width 150 mm Max. height 120 mm Adjustable feed speed, max. 140 m/min Top pressure rollers with drive, x 6 Pressure force adjustment via pneumatics Bottom rollers with drive, x 6 CE marking Year of manufacture 2013 Product description: - Paint without waste. - Robust and efficient transport system with 6 motorized pressure units. - Various application heads guarantee results, even for filling and defect repair products. Designed for continuous application of bolo, gesso, and paint on strips, picture frames, and profiles with an extrusion system, using a correspondingly shaped steel counter-template. Construction made of steel sheet and tubular steel. Guaranteed forward movement via No. 6 bottom metal rollers and No. 6 top rubber pressure wheels, variable with adjustable speed via an inverter. The top pressure wheels are mounted on freewheel bearings to reduce uneven wear. Pneumatic distribution panel equipped with a selector for engaging the top pressure wheels and appropriate independent pressure regulators. OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels, Italian company MAKOR, price €1,500 - Model: SAG 100 - Year of manufacture: 2003 - Serial number: 10447 - Diameter of profiled wheel: 160 - 200 mm Itedpsytc Rkefx Aaxok - Diameter of profiling disc: 180 - 200 mm - Machine dimensions: 1700 mm x 800 mm x 1800 mm - Weight: 280 kg 2. MAKOR ST/100 FOIL SLITTER, price €1,200 3. MAKOR TEP 3000 BELT CONVEYOR, price €700

Condition: used, mileage: 100 km, power: 265 kW (360.30 HP), first registration: 10/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, Equipment: had accident, * The vehicle is being sold as defective!! * Many missing parts!! See pictures * Mileage unknown -----Internal vehicle number: 9295----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Itodpfevhvnnox Aaxjk WhatsApp WhatsApp

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. Includes installation & commissioning! KEY TECHNICAL DATA Machine year of manufacture: 2016 Capacities / Travel: Longitudinal (X): mm 3,000 Vertical (Y): mm 2,000 Lateral (Z): mm 1,500 Clamping surface, NC rotary table: Swivel table: mm 1600 x 1400 Transport load: kg 15,000 Positioning accuracy: arc/sec ±2.5 Paint finish: graphite gray RAL 7024 / agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power (from 376 rpm): kW 40 Spindle speed range: Spindle speed: min-1 0 - 3,000 Torque: Nm 1,360 Speed control: 3-stage (oil-cooled) with automatic switching Connection power: kVA approx. 53 Feeds: Working feed max.: X, Y and Z axis mm/min 15,000 Max. Rapid traverse speed: X, Y and Z axis mm/min 25,000 Space requirement Length approx. mm 8,500 Height approx. (without tool changer) mm 4,200 Width approx. mm 5,600 Weight: kg approx. 29,200 HEIDENHAIN iTNC 530 HSCI Iodpjzux Awefx Aaxetk Automatic MTE milling head Diagonal Automatic tool changer Chip conveyor Coolant system with 50 bar & (IKZ) Full enclosure for working area (closed at the top) Extraction system for the aforementioned full enclosure Special operating mode RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and faults were professionally repaired by our skilled service team.

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier Itodpfsi Huvhex Aaxjk -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: good (used), Year of construction: 1968, machine/vehicle number: 68592, functionality: fully functional, type of input current: three-phase, Martin thickness planer in very good, used condition. T41 - Year of manufacture 1968 (?) Strip planing blade, Z4 Isdpfeziuqtsx Aaxstk The thickness planer was purchased from a dealer in 2018. The machine is being sold as part of the liquidation of our carpentry business. Pick-up price - delivery possible upon request. The sale is made with exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: good (used), Year of construction: 1983, machine/vehicle number: 8398714, functionality: fully functional, Paul multi-blade saw in good, used condition. K2V800/370/310 - Year of manufacture 1983 The multi-blade saw was used reliably for many years for the production of moldings and is still connected to the power supply. The machine is being sold as part of the closure of our carpentry business. Includes 5 saw blades. Isdpsziuxdsfx Aaxotk Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: like new (used), Year of construction: 2021, operating hours: 2,183 h, functionality: fully functional, machine/vehicle number: SR25-055032021, total height: 2,295 mm, total width: 1,510 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 1,000 kg, input voltage: 400 V, year of last overhaul: 2024, control voltage: 400 V, operating temperature: 250 °C, input frequency: 50 Hz, space requirement height: 4,000 mm, space requirement width: 2,000 mm, Equipment: documentation/manual, Professional 25 kg Industrial Coffee Roaster SR25 in Excellent Condition. The machine was used lightly in a specialty coffee roasting facility. It has been regularly maintained and operated only by trained personnel. Total production approx. 1,200 kg/month the first year, used only occasionally thereafter. The equipment is no longer in use due to a change in business focus and is available for immediate delivery. Key Features: - 25 kg batch capacity - Precise temperature control - Consistent roasting quality - Quiet and efficient operation Industrial Specialty Coffee Roaster Coffed SR25 (2021) in like-new condition, only ~2,200 operating hours in total. Iedpfsxvxq Rjx Aaxstk The machine’s condition is like new, with no technical issues, always operated by trained staff. The business is still operational but has switched to larger machines. The roaster has been decommissioned and is stored in a container, so on-site testing is not possible. However, a live video demonstration of the machine is available. Technical condition: - ~2,200 total operating hours - Excellent mechanical and cosmetic condition – looks and runs like new - No faults, no repairs, no defects - Regularly cleaned and maintained - Indoor commercial setup Included equipment: - Coffed SR25 roaster (25 kg batch) - Green coffee loader - Destoner system - Cyclone - Coffed afterburner - Control panel - Tools and accessories Full photo and video package available on request Live online demonstration Logistics: Location: Soeborg, Denmark Deinstallation support: Yes Assistance with loading and transport: No

Condition: used, Year of construction: 2007, machine/vehicle number: 511979, Turning length: approx. 400 mm, bar passage: 60 mm, Y-axis, counter spindle, 2x 14-station tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar loader MBL 65/3700, machine requires repair, gear pump defective, repair costs according to quotation: approx. €6,000.00 net, drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Ijdpfx Aozqy Uyjaxotk

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, This is a pizza conveyor oven manufactured by Lincoln, model Counter Top CT 2512 - continuous belt, year of manufacture 2022. The oven has been professionally overhauled in our in-house workshop and is fully functional. The list price is: €8,998 net / €10,707.62 gross Our price: €4,159.66 net / €4,950 gross You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Itedszub Ezepfx Aaxok Professional overhaul/inspection and expert cleaning. Checked and fully functional - or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 797 x 1269 x 457 mm Power connection: 400 V / kW: 6.1 / 50-60 Hz Exhaust air volume: 700 m³/h Temperature: adjustable up to 315°C Year of manufacture: 2022 Weight: 70 kg Belt dimensions: 410 x 1260 mm Baking area: 410 x 520 mm Belt speed: 30 sec - 15 min Output: 30-40 pizzas (26 cm diameter)/hour Baking time per pizza: 4 minutes Condition: used, overhauled, fully functional Further details: High-performance conveyor oven for up to 40 pizzas per hour with a 4-minute baking time Smallest professional digital conveyor oven for space-saving and easy installation in front and back areas Ideal for heating, cooking, baking and preparing crispy products 4 programmable menu buttons Very high efficiency even at low temperatures thanks to impingement technology Temperature range from 32°C to 315°C freely adjustable Belt speed can be adjusted continuously (30 seconds to 15 minutes conveying time) Equipped with on/off switch and digital touch panel for temperature and belt speed control The conveyor oven replaces conventional kitchen equipment such as salamanders, griddle plates, fryers and ovens Perfect for front-of-house cooking areas due to stackability and mobile base (optional) The electric conveyor ovens are equipped with an innovative and easy-to-use digital control and digital display of temperature and time Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively according to our general terms and conditions (AGB).

Condition: used, functionality: fully functional, machine/vehicle number: 3518100194, Year of construction: 1999, load capacity: 3,000 kg, fuel type: diesel, mast type: duplex, drive type: Diesel, Diesel forklift Ijdpfjzttlqjx Aaxstk Chassis number: 3518100194 Mast type: Duplex Condition: Limited operational readiness Technical condition: normal Front tire type: Solid rubber Front tire condition: 40 - 60% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: Linde H30D / Deutz engine, no.: R0803, year of manufacture: 1999, operating hours: not specified, lifting capacity: 3,000 kg, lifting height: not specified, overall height: 2300 mm, mast: standard, drive: diesel, engine: Deutz diesel engine, equipment: side shift, 3rd hydraulic valve, front and rear work lights, windscreen, full cabin and windscreen wiper. Condition / known defects: The Deutz engine starts. The machine drives, but sometimes shuts off again after travelling only a few metres. The tilt cylinder is defective. Poor visual condition. Sold in its current condition. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. 3rd hydraulic valve, rear work light, front work light, windscreen, full cabin, windscreen wiper.

Condition: used, functionality: limited functionality, Year of construction: 2003, operating hours: 20,268 h, lifting height: 3,750 mm, fuel type: diesel, mast type: duplex, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), Equipment: lighting, sideshift, - Engine has water in the oil; the heat exchanger is likely defective. - Mast assembly disassembled. - Without forks. - 2 work lights at the front. - 1 work light at the rear. - Twin tires. Itodpfxozp N R Io Aaxsk

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, overall weight: 8 kg, load capacity: 1 kg, arm reach: 790 mm, controller manufacturer: igus, controller model: iRC, input voltage: 24 V, repeat accuracy: 1 mm, igus robolink® DP 5 DOF articulated arm robot (RL-DP-5) A functional video can be sent upon request. Manufacturer: igus Model: robolink® DP 5 DOF articulated arm (RL-DP-5) Iedpfxozl N Tus Aaxetk Category: Industrial robot / Articulated arm robot Condition: Used machine / Like new (exhibition piece / test operation) Year of manufacture: 2020 Operating hours: approx. 50 hours Location: 6133 Weerberg / Tyrol Availability: Immediate PRICING: ----- Price type: Negotiable Price (net): 3,450,- EUR (plus 20% VAT, if a B2B invoice is desired) Invoice details: VAT can be shown (B2B invoice possible) For sale is a like-new, immediately ready-for-use 5-axis industrial robot (articulated arm) from the renowned igus® brand, part of the proven robolink® DP series (item number: RL-DP-5). The system was used exclusively for a short laboratory or test project and has only approximately 50 operating hours. The robot is in flawless, absolutely like-new condition, both technically and visually. Thanks to the integrated absolute value encoders on the stepper motors, the arm does not lose its current position even after a power failure, emergency stop, or restart. Complex reference runs are therefore not necessary during ongoing operation. SCOPE OF DELIVERY & SYSTEM PACKAGE: • Articulated arm: igus robolink® DP 5 DOF with backlash-free drylin® gears, stepper motors, and encoders. • Control electronics: Modular DIN rail version (complete control computer for mounting in a control cabinet). • Software: Original royalty-free igus iRC (igus Robot Control) programming software (free download for intuitive, easy programming on a PC). • Free test accessories: A fully functional, self-built vacuum gripper is included in the package as a free addition for immediate testing and training. TECHNICAL PARAMETERS: • Degrees of freedom / axes: 5 DOF • Payload: 0.5 kg (nominal) to max. 1.0 kg (depending on the working area) • Reach: approx. 790 mm • Swivel range (axis 1): 360° • Control: igus Robot Control (iRC) – DIN rail control computer • Voltage supply: 24 V DC (approx. 12 A) • Interfaces: 7 digital inputs and outputs (I/Os) for peripherals & gripper • Weight (articulated arm): extremely light 7.94 kg • Repeatability: +/- 1.0 mm CONDITION / INSPECTION: The device is currently ready for operation and can be demonstrated and tested on site if desired. HANDLING & SHIPPING: • Collection preferred (postal code: [Your postal code]) • Insured shipping via a freight forwarder or parcel service in a robust transport box is possible after consultation and upon assumption of costs. • A proper B2B invoice with VAT can be issued upon request. If you are interested or have questions about technical integration, please contact us directly via the message function. ----- Legal notes for used machines: The sale is preferably made to commercial enterprises (B2B) with the exclusion of any warranty, guarantee, and liability for defects. Subject to prior sale.

Condition: used, Year of construction: 2022, operating hours: 300 h, functionality: fully functional, power: 100.03 kW (136.00 HP), overall weight: 5,500 kg, fuel type: diesel, The BBT 400 Woodzilla is a 360° rotatable, compact, powerful, mobile drum chipper with aggressive feed, mounted on a truck trailer chassis. Technical Data Year of manufacture: 2022 Operating hours: approx. 300 hrs Drive: Diesel, Deutz TCD 3.6, 100 kW (136 HP), Stage 5 Feed opening: 320 x 500 mm Chipping drum: 400 x 500 mm, 4 knives Max log diameter: 32 cm Infeed table length: 1300 mm Support: 4-way hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer towing eye: 40 mm Brake: Air brake system, Duomatic 2 additional feed rollers Iedpfx Aox Ektxeaxetk The machine is in like-new condition. Location: NRW Availability: by arrangement Warranty: The machine is sold in the condition it is in at the time of handover. The seller assumes no liability for defects. We reserve the right to prior sale, modifications and repairs. Didn't find what you're looking for? Then contact us!

Condition: repair required (used), functionality: limited functionality, Year of construction: 2001, load capacity: 1,500 kg, load center: 500 mm, fuel type: electric, battery voltage: 48 V, color: yellow, We are offering this Jungheinrich EFG-DF15MPG+E98-310ZZ front forklift, manufactured in 2001, which requires repairs. The battery is defective, but otherwise it is in working order. No warranty. Load capacity: 1500 kg Load center: 500 mm Battery voltage: 48 V Battery capacity: 400–480 Ah Year of manufacture: 2001 If you have any questions or require further information, please feel free to send us a message or call us. Itsdpszr Rxfefx Aaxsk

Condition: used, This is a vacuum machine from the manufacturer Komet, type PlusVac 20, a tabletop model. This vacuum machine is in very good condition. The machine underwent a thorough inspection in our in-house workshop (motor flush and new pump oil added). The following parts were replaced: counter-pressure bar of the sealing bar + air vent element + lid seal + lifting cylinder + sealing bar overhauled, sealing wires + Teflon tape replaced. The machine is fully functional. You will receive an invoice with VAT shown. This machine is made of stainless steel, is robust and reliable. The machine has a Plexiglas lid and is equipped with electronic control and a vacuum stop button. It has a double-wire sealing bar with a sealing length of 405 mm. The maximum bag size is approximately 400 x 500 mm, and the chamber size is approximately 430 x 505 x 175 mm. Our used equipment service for you: Iodpfxozu Rrks Aaxjtk 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 485 x 615 x 400 mm Power connection: V: 400 / kW: 1.078 / A: 3.487 / Hz: 50 Weight: approx. 62 kg Machine number: 3081454316 Chamber size (W x L x H / mm) 430 x 505 x 175 Control Standard Comfort Option Perfect Sealing length (mm) 1 x 405 (2 x 405) Sealing bar length: (mm) 420 Double seam Distance x (y) (mm) 455 (400) Sealing bar arrangement Standard front Option rear Pump (cbm/h) 21 Power connection 400V / 3Ph+N+PE / 50Hz Power consumption (kW) 1.1 Max. bag (mm) 400 x 500 Insertion plates 2 External dimensions (lid closed / W x D x H/mm) 480 x 655 x 385 External dimensions (lid open / W x D x H/mm) 480 x 655 x 920 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 Isdpfxey Sam Uo Aaxotk - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Condition of the machine: The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.