Used Diaphragm Accumulators for sale (513)

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for Godpfx Aencd Azsadoin lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: used, Used Breddo model LORWW 100 US gallon (378 litre) capacity stainless steel vertical jacketed mixing vessel/Likwifier. Has approximately 1200mm diameter X 470mm deep tank with welded cone bottom and flat open top with hinged lids. Has approximately 250mm diameter bottom entry general purpose impeller belt driven by 30 hp 415 volt 3/50 1500 rpm motor with Allen-Bradley Powerflex 70 inverter drive. Also includes baffle bar. External jacket rated 125 psi (8.6 bar) working pressure at -20/+400 degf (-29/204 degc). Mounted on stainless steel mobile base with diaphragm pump local controls. Specifications: Capacity: 100 gal Diameter: 3.94' Height: 1.54' Type of stainless: Stainless Steel Giedpfsygviyjx Aadon Vertical/Horizontal: Vertical Legs/Lugs/Skirt: Mounted on stainless steel mobile base

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Gjdpfoyiz Nwex Aadsin -Hydraulic power unit: with hydraulic reservoir, mobile -Hydraulic pump: Pressure up to 140 bar -Flow rate: 12 l/min -Motor: Electric 2.2 kW / 1380 rpm -Pressure accumulator: 6.3 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 770/380/H810 mm -Weight: 110 kg

Condition: excellent (used), Year of construction: 2008, Ref: 11054 . 2008 Horizon Stitchliner 5500 Fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: • 10.4” icon-based 200 job memory colour touchscreen • Simple, fast set-ups by non-specialist finishing operators • Advanced all-system automation • Make-ready in seconds, next-to-no-waste, on-demand working • Works from flat-sheet 4-page sections • No need to pre-fold • Integrated automatic set-up 3-knife trimmer • No need to pre-trim • Score, plough fold, registration and genuine saddlestitch • High quality books with sharp spine definition • High efficiency from runs-of-one Comprising: Gisdpfxsx Sq S Ie Aaden 30 station - 5 x VAC60 (a+m+c) 6 station tower suction collators with touch-screen control, double- and miss-sheet control Separate collating from 'C' tower ST-40 Stacker /bypass to; ACF-40 Accumulator/Folder with double gate-fold to; SPF-30 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-30 Three knife trimmer unit with hand-feed station LC-20 Long belt delivery Specification: Max sheet size: 350W x 500L mm Min sheet size: 148 x 210 mm Max stitch thickness: 6 mm. Production speed up to 6,000 booklets per hour, dependent on stock.

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions Godpfx Aovp Sd Ijadsin - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Model: ACS WZH10-4080-2 BT Angelantoni Walk-in Climatic Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and is equipped with advanced safety features specifically tailored for battery and accumulator testing (e.g., lithium-ion). Special feature: Safety equipment for battery testing: The system is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled pressure discharge in the event of a malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research tests Godpfxjyg I Eyo Aadsin - Endurance, aging, and stress tests Technical data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climatic chamber, double-door Test range: Temperature: –40 °C to +80 °C Relative humidity: 10% to 95% RH Electrical data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration system Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: External dimensions (approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: new, mileage: 9,863 km, power: 382 kW (519.37 HP), first registration: 12/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,500 mm, loading space width: 2,480 mm, loading space height: 1,300 mm, Year of construction: 2024, operating hours: 699 h, Equipment: AdBlue, crane, = Additional options and accessories = Gjdpfxoyiukzo Aadsin - PTO (Power Take-Off) = Further information = Technical Information Transmission: MAN TipMatic 12.28 OD, automatic Front axle 1: Steering Front axle 2: Steering Weights Unladen weight: 29,275 kg Payload: 7,725 kg Gross vehicle weight: 37,000 kg Functional Boom: Telescopic (15 sections) Boom length: 37.5 m Lifting capacity: 30,000 kg Superstructure brand: EFFER iQ.1400 HP-9 CRANE + JIB 260Q-6 + WINCH CE marking: yes Condition General condition: very good Technical condition: very good Optical condition: very good MAN TGS 35.520 FLATBED WITH EFFER iQ.1400 HP-9 CRANE + JIB 260Q-6 + WINCH | DEMO TRUCK!!! EURO 6 L-PACKAGE 520 HP DRIVE 8X2H-6 LEAF/AIR SUSPENSION 1st axle load: 9,200 kg 2nd axle load: 9,200 kg with hydrodrive, steerable 3rd axle HY-1350, axle load: 13,000 kg 4th axle load: 9,000 kg, steerable and liftable TGS sleeper cab with Climatronic air conditioning Additional water heater 6 kW Ventilation cannot be switched off, reduces dust accumulation Multifunction steering wheel, leather, height and angle adjustable Steering wheel with parked position Steering lock with electronic immobilizer Professional instrument cluster 12.3-inch 2 power sockets: 12 V and 24 V 230 V sockets, 2 USB ports MAN Easy Control long haul panel with 4 functions Side camera Electric sunblind for windshield (internal) Folding table on passenger side Pull-out refrigerator and storage box in the center console Electronic Stability Program (ESP) Traction Control (ASR) Automatic voice recognition via driver card Cruise control (FGR speed regulator) Lane departure warning (LDW) MAN AttentionGuard fatigue detection system Tow bar Platform: 450 cm long, 248 cm wide, +/- 130 cm high EFFER iQ.1400 HP-9 CRANE + JIB 260Q-6 + WINCH Main boom: 9x hydraulically extendable Jib: 6x hydraulically extendable Radio remote control Max. lifting capacity at 3.2 m: 30,000 kg Max. lifting capacity at 35.4 m: 500 kg Max. lifting height: 37.5 m 6x boom extensions, including 2x front outriggers FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Modular Environmental Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and cell tests (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and test environments (subject to customer-specific safety concept/BMS). Description: For sale is a professional environmental test chamber by Weiss Technik, Model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing, making it ideal for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. The chamber is particularly suitable for: - Functional and service life tests - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g., lithium-ion) under defined climate conditions (with the appropriate customer-side safety concept/BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and automated. The unit was in use until recently and is fully functional. General Information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% rH Humidity accuracy: ± 5% Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: Water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical Data: Gedpfjygvw Rox Aadjin Power supply: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Environmental test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see picture) (Modifications and errors in technical data and specifications excepted!) For further information please feel free to contact us by phone.

Condition: excellent (used), Pamasol 33200 Pneumatic feeder With 1-lane exit onto the conveyor belt Accumulation conveyors ensure an even product feed to a processing machine. - Hinged belt chain 150 mm wide - 8-lane, with 1-lane exit - Drive with infinitely variable geared motor - Without center belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feed table suitable for Centomat Giodpfxeqazqie Aaden Specifications Capacity: Up to 3000 cans per day The capacity depends on the can size, filling volume, valve type and number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminum, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm New price 57.000 ,-€ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, ABEL valve seats for ABEL piston diaphragm high-pressure pumps. NEW ! We are your supplier for ABEL piston diaphragm high-pressure pumps, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice. Gijdoiyqipepfx Aadjn

Condition: new, ABEL ball with steel core for ABEL piston diaphragm high pressure pumps. Gijdoiyqiwepfx Aadon NEW ! We are your supplier for ABEL pumps, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL valve ball on valve seat for ABEL piston diaphragm high pressure pumps. Gsdsiyqizopfx Aadsin NEW ! We are your supplier for ABEL piston diaphragm high-pressure pumps, filling pumps, chamber filter presses, service and spare parts partners for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL contact pressure gauge for ABEL piston diaphragm high-pressure pumps. pump monitor, Gedpfx Aoiyp S Ieadjin NEW ! We are your service and spare parts partner for ABEL pumps. Almost all spare parts are available from stock or at short notice.

Condition: new, ABEL degassing valve for ABEL piston diaphragm high pressure pumps. NEW ! Gijdoiyqi Njpfx Aadon We are your supplier for ABEL piston diaphragm high pressure pumps and service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, Air feed fitting for ABEL piston diaphragm high pressure pump NEW. We need the pump type / series and the machine number from you. Godpsiyp Thjfx Aadsin Almost all spare parts available from stock. Your reliable ABEL pump supplier, service partner and spare parts supplier for ABEL pumps.

Condition: new, ABEL air feed fitting on the pressure side for piston diaphragm high-pressure pumps. Gjdoiyp Tzepfx Aadsin NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: new, ABEL valve ball for ABEL piston diaphragm high-pressure pumps. Gjdsiyqitjpfx Aadjin NEW ! We are your supplier for used and new piston membrane high-pressure pumps / filling pumps for chamber filter presses, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL degassing valve for ABEL piston diaphragm high pressure pumps. NEW ! We are your supplier for ABEL piston diaphragm high pressure pumps and service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice. Gedpfxoiyqi Ee Aadoin

Condition: refurbished (used), Chamber filter press 1200x1200 Application: gravel works / tunnel construction Number of filter plates: available in different designs and number of plates Filter pressure: 15 bar Filter cloths: optional in coordination with the medium Gedpferq I Iwjx Aadoin Piston diaphragm pump: optional Available: pre-configured from stock or according to customer requirements Condition: refurbished - rebuilt also according to customer requirements

Condition: new, Hydraulic piston diaphragm pump, used Type: REWA/Abel HMD-G-50-0500 Giedpfx Aajib A Dwodsn Construction: long Flow rate: max. 50 m³/h Delivery pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm,

Condition: new, Membrane for REWA ABEL piston diaphragm pumps. Diaphragm pumps separate difficult media from the driving pump mechanism. An advantage of the piston diaphragm pump is that the fluid and hydraulic fluid are completely separated and do not come into contact with each other. We supply you with diaphragms (Abel spare parts) for all Abel / REWA pumps in known production quality with an above-average service life. Ask us Gsdpfx Aaed Hghkedoin

Condition: used, REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Giodpfx Aaeb U Du Aoden Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact us, we are available.

Condition: excellent (used), Year of construction: 2014, General information Field of application: Construction Reference number: 2 Weights Empty weight: 450 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 6,5 t - 13 t Reconditioned: Yes Delivery terms: EXW Working pressure: 100-150 bar Required hydraulic flow: 100 l/min Strike count: 550-1250 Latest inspection: 2024-03-01 Production country: DE Additional information Gsdpfx Aajrr Tg Nedein Please contact Ö. Inalkac for more information Atlas Copco/ Epiroc SB452 general overhauled/GENERALÜBERHOLT top condition. This SB452 is with following NEW parts: seal kit, diaphragm, bushing, retainer pins, stop pin, control valve, chisel/tool, hoses and new painted. SB552, SB450, SB302

Condition: excellent (used), Year of construction: 2019, General information Field of application: Construction Reference number: 2 Weights Empty weight: 750 kg Functional CE mark: yes Giedpfx Ajwurv Tsaden Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 10 t - 17 t Reconditioned: Yes Delivery terms: EXW Transport dimensions (LxWxH): 1,2x0,8x0,6 Working pressure: 140-170 bar Required hydraulic flow: 120 l/min Strike count: 370-840 Latest inspection: 2025-05-05 Production country: DE Additional information Please contact Ö. Inalkac for more information Epiroc MB750 general overhauled/GENERALÜBERHOLT in top condition. This MB is with following NEW parts: Seal Kit, diaphragm, retainer pins, stop pin, bushing, chisel/tool, hoses and new painted. MB700 MB1000 MB1200

Condition: excellent (used), Year of construction: 2019, General information Field of application: Construction Reference number: 6 Godpfxox Ezl Se Aadjin Weights Empty weight: 300 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 4,5 t - 9 t Reconditioned: Yes Delivery terms: EXW Transport dimensions (LxWxH): 1,2x0,8x0,6 Working pressure: 100-150 bar Required hydraulic flow: 80 l/min Strike count: 600-1400 Latest inspection: 2025-05-05 Production country: DE Additional information Please contact Ö. Inalkac for more information Epiroc SB302 general overhauled/GENERALÜBERHOLT in top condition. This SB302 is with following NEW parts: Seal Kit, diaphragm, retainer pins, stop pin, bushing, chisel/tool, hoses and new painted. Atlas Copco, SB202, SB300