Used Diaphragm Accumulators for sale (510)

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) Rodex D Hgvjpfx Aaasr • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: ready for operation (used), Year of construction: 2006, This Durma AD-S 30135 press brake was manufactured in 2006. It features a ModEva 10S control unit and has accumulated 39,801 working hours. With a bending length of 3050mm and a tonnage capacity of 135t, it's designed for robust performance. Consider the opportunity to buy this Durma AD-S 30135 press brake. Contact us for more information. Redpfx Aajyaincoajr Additional equipment • Additional Tool Set: Sold separately Machine Benefits Technical Machine Benefits • Cnc operated axes: y1, y2, x, r (3-axis press brake) / manually operated axes: z1, z2 • Bending length: 3050 mm / tonnage: 135 t

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 Rsdpfx Asyhfvljaaor • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Rodpfx Aaex D Hnyjajr Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 37,049 h, clamping force: 4,000 kN, overall weight: 21,000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine. Clamping unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / increased: 800 kN • Opening stroke (max.): 700 mm • Mold height (min.): 350 mm • Distance between platens (max.): 1050–1550 mm • Clear tie bar distance: 820 × 820 mm • Mold mounting platens (W × H): 1171 × 1171 mm • Mold half weight (max.): 4500 kg • Ejector force (max.): 100 kN • Ejector stroke (max.): 250 mmHydraulics / drive / miscellaneous • Hydraulic pump drive power: 55 kW • Installed total power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Color: Plastic-coated structure (light gray / mint green / rapeseed yellow) • Control cabinets: Safety regulation DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 AInjection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 Rjdpfx Aaeydpvbjasr • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating capacity: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heating: 1000 W | 1250 WDimensions and weights (base machine) • Clearance length: 490 mm • Electrical connection (fuse protection) motor + heating: 250 A • Electrical connection (fuse protection) motor: 125 A • Electrical connection (fuse protection) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Rjdpfx Aaox D Rqroaer • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Redsx D Hnmepfx Aaaer Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN Rjdpfeydnigsx Aaaer • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system Rsdpfx Aox Sz A Rjaaor

Condition: used, maximum load weight: 31,418 kg, overall weight: 39,000 kg, axle configuration: 2 axles, first registration: 12/2023, loading space length: 1,362 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, Year of construction: 2023, Vehicle complies with EU type approval and comes with a Certificate of Conformity (CoC). Registration country: GERMANY. TÜV certificate LS0510855 Z1 for coil transport. Main frame height: front 125mm, rear 423mm, Smart Generation. "MODULOS" bolted chassis. E-spare wheel carrier, basket version bolted for 2 E-wheels, mounted behind the axle group. Axle spacing: 1310/1410 mm. Exemption permit for up to 45 tons gross train weight. 10-year anti-perforation warranty on the chassis (see warranty terms). External frame with curtain hook profile and 3 pairs of stake pockets. Continuous lashing holes in the external frame. Underrun protection. King pin: 2" to SAE standard, replaceable. King pin position: 1690 mm. Side impact protection combined with pallet box. Starting aid (liftable front axle), activated by "3x Braking" – use permitted only as a starting aid. Model SCS 24/L - 13.62 C E B. Manufacturing date 08.12.2023. Body length 13,620 mm, body width 2,480 mm, front wall height 2,400 mm, body height front 2,680 mm, maximum body height 2,780 mm, internal clearance height front 2,600 mm, internal clearance height rear 2,700 mm. Total height front (unladen): 4,000 mm; rear (unladen): 3,995 mm. Rear loading height (unladen): 1,185 mm. Tire size: 385/65R22.5. GVW (permissible/technical): 39,000/39,000 kg. Payload (permissible/technical): 31,418/31,418 kg. Axle load (permissible/technical): 27,000/27,000 kg. Fifth wheel load (permissible/technical): 12,000/15,000 kg. Curb weight complete: 7,582 kg. Saddle height (unladen): 1,153 mm. Reference length external: 13,690 mm. Body width: 2,550 mm. Ride height: 265 mm. Wheelbase: 7,700 mm. Rear door height: 2,748 mm, width: 2,480 mm. 5 pairs stake pockets 80x80 mm for coil restraint posts. Coil well: 7,200/320/1,250mm. Pair of coil-combi restraint posts 80/70 mm. Brake disc diameter: approx. 430 mm. ROTOS SCB running gear system (disc brakes). Axle: SCB 9 t, SP2040, FM1300, ET 120, disc brake 430 mm. Wheel attachment via central alignment per DIN 74 361 Part 3. SCB air suspension type: MRH-KM30 3. Double-line compressed air brake system with standard connectors. Steel air tanks. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double diaphragm spring actuators. Lift and lowering device with AUTO-RESET function. 2 chocks with holders. Landing gear manufacturer: JOST, semi-round baseplate, single-side operation, low-maintenance. Lighting system: 24V with multi-chamber lamps. 2 x 7-pin sockets (1x DIN ISO 3731 / 1x DIN ISO 1185) and 1 x ISO 12098 socket. Continuous lamp carrier in white with "SCHMITZ" embossing. LED side marker lights synchronized with indicators. 1 pair of LED lane marker lights. Without reversing warning system / ramp approach aid. Tire brand SCB "SELECTION": Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone, for regional service (M + S). 6 x 385/65R22.5 (11.75x22.5). Steel wheels ET 120. Protective caps for wheel nuts. Additional pair of straight plastic fenders between the axles. Straight plastic fenders. Antispray mud flaps with Schmitz logo. Lashing rings: 11 pairs rated at 6 t and 5 pairs at 4 t tensile force per ring, as per EN 12640. Plastic toolbox with lid holder, shelf and drawer, located behind the axle group. Plastic water tank 30 liters. Pallet stop right side, 19 mm high, on external frame. Rear rubber impact protection. 2 vertical rubber dock bumpers on lamp panel. Pallet box for 24 Euro or 16 ISO pallets. Pallet box ground clearance: 284 mm. Hol Rodoyr Uz Sspfx Aaaer

Condition: used, Dematic conveyor system Roller conveyors can be individually planned RA1287 We plan your individual conveyor system from used goods! The Dematic roller conveyors are in good (used) condition. The roller conveyors are available in different versions, e.g. as: Gravity conveyors - Roller conveyors without drive Roller conveyors - roller conveyors and roller curves with drive Accumulation conveyors with RSPN without RSPN (pneumatic space brakes) Available conveyor lengths (FL): 3000 mm, 2000 mm, 1500 mm, 1000 mm Available nominal/outer width (NB): 600 mm, 500 mm, 400 mm Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Roller width (RB): 540 mm 440 mm 340 mm Roller pitch: 62.5-125 mm variable (for roller curves the smallest pitch is 56 mm) Drive types: Head and center drive Load weight: up to 30 kg Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Rjdsk Aa R Ispfx Aaaer Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2002, Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle Rodjr Iiubopfx Aaasr - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base plates: 4 base plates with holes Load/m: min. 30 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Redpfx Aaok Abnveasr Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, RA1288 Gebhardt Roller Conveyor System individually plannable. Price on request! We plan your individual conveyor system with tested, used Gebhardt conveyor technology, according to your wishes! Large quantities and different designs available! The Gebhardt conveyor systems are in a very good (used) condition. The roller conveyors are available in different versions, e.g. as: Rodpfek Aa Slsx Aaaor gravity roller conveyors and curves - roller conveyors and curves without drive roller conveyors and roller curve conveyors - roller conveyors and curves with drive Accumulation roller conveyor (without accumulation pressure) - for separating the conveyed material Inclined inlets and pusher - for infeed or outfeed Stroke converter (toothed belt pusher) - for inward or outward transfer Roller switches - for sorting the conveyed material Available conveyor lengths (FL): e.g. 3000 mm, 2000 mm, 1500 mm, 1000 mm (individually customizable) Available nominal/outer width (NB): 610 mm, 510 mm Available roll widths: 550 mm, 450 mm roller pitch: 100 mm, 75 mm The following accessories are optionally available e.g..: Motors with and without frequency converter of the brand SEW Eurodrive / Movimot Supports variably adjustable side guides Light barriers /-switch Price: on request plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side Selfholding/selfstopping crank attached light bar Color: red, original color is here for an additional painting Supports: 2 double supports rigid Rjdeqz Dt Ropfx Aaaor Base plates: 4 base plates with holes load/m: 50 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction Evaporation chamber | Stainless steel, full inspection access Heat exchanger | AISI 316L tubular exchanger Vacuum pump | Liquid-ring system with cooling recirculation Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless-steel centrifugal and mono volumetric discharge pump Vapor condenser | Stainless-steel surface condenser Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks Rsdsykrdbepfx Aaasr

Condition: used, Year of construction: 2000, machine/vehicle number: LC572, Technical Specifications & Performance Data Engineered for continuous olive oil extraction and seamless downstream packaging, this second hand line pairs traditional granite milling with modern separation. It can interface with a used bottling line for edible oil in PET or glass containers, supporting efficient industrial packaging workflows. Throughput: up to 2,500 kg/h (≈2.5 t/h) of olives, continuous duty Year of manufacture: 2000 Condition: READY FOR OPERATION Primary process stages: reception and elevating conveyors, washing/deleafing, four-wheel granite stone mill, malaxation (4 stainless tanks), vibrating screen, Barracane 4015 decanter centrifuge, Alfa Laval final separator (approx. 2000 L), centralized electrical panel Key components (sample): Various Equipment – Barracane 4015 decanter (2000), elevating conveyor, stainless malaxers with gear-driven paste pumps, Alfa Laval polishing separator Container types downstream: PET and glass as standard; compatibility with metal cans possible upon integration Typical oil packaging range downstream: 250 ml to 5 L (format depends on connected filler/capper) Materials in contact: food-grade stainless steel in malaxers, enclosures, and wetted parts Advanced Automation & Control Systems A centralized electrical panel manages motors, pumps, and malaxation temperatures for stable, repeatable extraction. The control architecture supports integration with bottling functions such as rinsing, filling, capping, and labeling for beverage production environments. Centralized start/stop, emergency stops, and status indicators Temperature control for malaxers to preserve organoleptic quality Variable-speed drives for conveyors and pumps to balance flow to the decanter PLC/HMI-ready I/O for line supervision, recipe management, and alarms Electrical supply: three-phase industrial standard (e.g., 400 V, 50 Hz) with protective breakers Production Line Integration Capabilities Designed for easy pairing with downstream oil bottling equipment, the line can feed buffer tanks or directly supply a used bottling line for PET or glass. Interfaces support quick connection to rinsers, volumetric or weight-based fillers, cappers (ROPP, screw), labelers, and date coding/traceability modules typical of industrial packaging systems. Sanitary tri-clamp and flanged connections for rapid hook-up Flexible flow control to match filler speeds and minimize bottlenecking Compatible with conveyors, accumulation tables, and case packing systems Format agility for common edible oil SKUs without major hardware changes Machine Condition & Maintenance History In READY FOR OPERATION condition, this second hand Barracane-based system shows robust mechanical integrity and clean stainless surfaces in process-critical areas. Regular servicing has preserved performance of the granite mill, malaxers, and separator set, allowing immediate deployment and straightforward commissioning within an existing plant. Rjdew Ag T Aepfx Aaaer Operational Performance & Versatility The granite stone mill ensures gentle crushing, while controlled ...

Condition: good (used), Year of construction: 1996, operating hours: 32,750 h, functionality: fully functional, machine/vehicle number: 266568, clamping force: 750 kN, screw diameter: 3,025 mm, displacement volume: 8,549 cm³, full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) Rodjcud Nhspfx Aaasr platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: like new (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Used injection moulding machine – with 3 interchangeable injection units (25, 35, and 50 mm) Currently fitted with 50 mm unit Includes Geiger picker, integrated conveyor belt From ongoing German production, fully functional See document for download Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Redpjvhb Iyefx Aaasr Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Clamping unit: - Clamping force: 1,500 kN / 150 tons - Tie bar distance: 470 x 470 mm - Platen size: 650 x 650 mm - Ejector stroke: 175 mm - Opening stroke: 500 mm - Min. mould height: 250 mm - Max. daylight between platens: 750 mm Injection unit (50 mm): - Shot volume: 392 cm³ - Shot weight: 350 g - Screw diameter: 50 mm - Injection pressure: 1,670 bar Alternatively, 25 mm and 35 mm injection units included Extras: - Geiger picker - Handling interface - 2x air blow-offs - Accumulator for fast injection - 9 electric heating zones - 4 free cooling circuits - Optional equipment packages: Extended monitoring, enhanced motion controls, production management, process optimisation / operator aids, quality assurance, documentation - Electric conveyor belt - Sorting unit Documentation and software available in German (fully comprehensive) - Immediately available from our Hannover warehouse, loaded ex works or delivered (shipping at cost) - Function tested (guaranteed function up to first commissioning)

Condition: used, Year of construction: 1998, - Producer Sorbini - Type T/20MF - Year of construction 1997 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height ~ 880 - 920 mm - Part height ~ 5 - 80 mm - Operating side, left - roller diameter ~ 248 mm - Metering roller ~ 174 mm - Reverse drive Rodpfxsvupc Ee Aaajr - Double diaphragm pump 1 Stk. - Length 950 mm - Width 2.550 mm - Height 1.540 mm - Weight ~ 1.220 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Voltage fluctuation max. +/- 5 % THE PICTURES are not original pictures, They are only an example of a reconditioned machine

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt Rodpfx Aajuyky Teaor - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: used, Year of construction: 2014, machine/vehicle number: DB4078Q02A, The pictures show the machine in its unrefurbished condition. The offer price refers to a partially refurbished, functional machine. - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF-EVO - Two application units, one in REVERSE - Roller running directions shown in picture 10 - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: left - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150mm - Roller diameter: 100mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length 900 mm - Machine width 3,000 mm - Machine height 1,500 mm - Mobile on flanged rollers - Feed speed ~ 4 - 20 m/min - Application quantity ~ 4 - 50g/m² Rodpfjyatd Isx Aaasr - Machine weight 2,520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.4kW / 30A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Location: in storage

Condition: used, Year of construction: 2006, operating hours: 43,950 h, machine/vehicle number: LC614, Used KRONES PET complete line for ESL 12000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET ESL applications with UV cap treatment and is aseptic-ready. Engineered around Krones equipment, it delivers consistent performance for 0.5L and 1.0L formats. The line is suitable for industrial packaging and beverage production, especially for sensitive products requiring extended shelf life.Line type: PET ESL with UV cap treatment; aseptic-ready configurationMaximum line speed: 12000 bph (based on 1.0L)Formats: Compatible with 0.5L and 1.0L bottle formatsNeck formats: 38mmContainers: Designed for PET bottle handlingBlow molder: Krones Contiform S8, 8 cavitiesFiller: Krones VODM-PET counterpressure volumetric filler, 32 headsLabeling: Krones rotary labeler with 10 plates (10000 bph) and Krones rotary labeler with 8 plates (8000 bph)End-of-line: Case packer and Fanuc robot palletizer for EuropalletsOperating hours: Approximately 43950 hoursManufacturing year (main equipment): 2006Model references: Contiform S8, VODM-PETAdvanced Automation & Control SystemsThe line integrates modern automation with centralized HMI for recipe management, production counters, and real-time performance monitoring. Automatic valve and pump control supports consistent filling conditions and stable operation at target throughput.Automated production functions with HMI-based controlPerformance setpoint management and production counter visualizationUV cap treatment system integrated for ESL complianceDesigned for hygienic operation and stable fillingQuick recipe selection for 0.5L and 1.0L formatsProduction Line Integration CapabilitiesThis second hand complete bottling line is configured for inline operation from PET preform blowing through filling, labeling, case packing, and robotic palletizing. Conveyors and accumulation ensure smooth product flow with minimal stops.Inline configuration from blow molding to palletizingDual rotary labeling machines to optimize throughput across formatsFanuc robotic palletizer for Europallet patternsFormat changeover between 0.5L and 1.0L with dedicated change partsSuitable for beverage production workflows requiring ESL conditionsMachine Condition & Maintenance HistoryThe line remained in production until December 2025. It is still connected to the electrical network and can be demonstrated running. Overall hours are approximately 43950, reflecting a well-utilized but maintained system typical for industrial packaging environments. No refurbishments are declared, and the equipment has remained in service through recent operations.Operational until December 2025Connected and can be seen runningApprox. 43950 operating hoursCommercially maintained in a productio... Rsdpfxoywk Srs Aaajr

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, mobile -Hydraulic pump: Pressure up to 140 bar -Flow rate: 12 l/min Rjdpfxeyiz Nwj Aaaer -Motor: Electric 2.2 kW / 1380 rpm -Pressure accumulator: 6.3 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 770/380/H810 mm -Weight: 110 kg

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130 t Year of manufacture: 2008 Shot weight: 475.9 g Injection unit 1000 Rjdpfxjynzrps Aaaor Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Shot weight: 475.9 g Clamping force: 130 t Mould platen dimensions: 745 x 745 mm Tie bar spacing: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Max. platen distance: 900 mm Weight: 8,000 kg Year of manufacture: 2008 Control: MC5 Equipment: - accumulator - euromap 67 interface - 2 x pneumatic valve - hydraulic core on moving platen