Used Die Cutting Machine for sale (68,801)

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. Hodpfxsw Udy Ne Aaask This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Hjdpfx Aajv Nzpgjajk Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), nominal power: 7.5 kW (10.20 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,600 rpm, input frequency: 50 Hz, input current: 30 A, type of input current: three-phase, overall weight: 8,200 kg, total length: 3,320 mm, total width: 2,440 mm, total height: 2,130 mm, grump will follow shortly Hedpfx Aaswvbm Rsajk

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm Hedpfx Aaex Ndu Djask - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5 Hodpjw R Eqbefx Aaajk

Year of construction: 2000, condition: used, Punching machine Noble HM 35/350 Hedpfx Aajg Dgyxsaek BKE 200/5 Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Year of construction: 2002, condition: ready for operation (used), An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible. Hsdpeyt N Dkofx Aaask

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame Hodpfxeyxrzdj Aaask – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards – Operating tools and instructions with CE documentation.

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Hodexluukepfx Aaaek

Condition: used, Year of construction: 1963, machine/vehicle number: SBG 24 191, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, We offer this used Heidelberg Original Heidelberg Cylinder SBG 77x56cm automatic die cutting machine, year of manufacture 1963. Manufacturer: Heidelberg Model: Original Heidelberg Cylinder SBG Serial number: SBG 24 191 Max sheet size (width × length): 77 × 56 cm Hodpeymx T Iefx Aaajk Year of manufacture: 1963 Condition: used If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats Hodjywdr Ejpfx Aaaek – operating tools – hard sheet metal

Year of construction: 1975, condition: good (used), functionality: fully functional, Heidelberg Cylinder SBG 57x77cm ref 2977 Max sheet size: 56 x 77 cm Automatic feeder Good working condition. Hodpfx Aaeyyaxmeask Available immediately.

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm Hedpfx Aasc Uldreask -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Year of construction: 1996, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1996 Hsdpfjb A H U Eox Aaaok

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Hedpfx Asymxkajaaek This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995 Hjdpob A Nc Hefx Aaaek

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication Hodpoyl Ry Dofx Aaaek - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Year of construction: 1999, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 Hsdpfx Aasb A N T Heajk -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station Hodpfx Aajlyqrcoajk including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 570 x 820 mm Minimum sheet size 230 x 280 mm Max. cutting pressure 1.8 MN Maximum number of strokes per hours 8.000 sh h Suitable for following material Hsdpolyqpdjfx Aaask Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000g/m² Corrugated board up to a maximum thickness of 3 mm Equipment Feeder Strippingstation including auxiliary pile for Non-Stop delivery Centerline 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Hjdpolyp Emefx Aaaek Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machine delivery time: 6-8 month after order

Condition: good (used), Automatic die-cutter Bobst SPO 1575 EEG ref 2925 Year – 1966, machine modernized in 2008 Hjdpfjytuxgjx Aaajk Max sheet format – 1055 x 1575 mm Min sheet format – 400 x 600 mm Max mechanical output – 4500 sheets/h Max pressure – 350 t Vacuum feeder Stripping section Waste removal by bar Batch delivery Attractive price for quick sale

Year of construction: 1991, condition: good (used), Bobst 102E ref. 2957 year: 1991 max sheet size – 720 x 1020 mm min sheet size – 350 x 420 mm max pressure – 250 tons stripping section Hsdpeyturyjfx Aaaok material – board up to 2000 gsm corrugated board – E flute machine raised – 300 mm

Year of construction: 2010, operating hours: 33,000 h, condition: excellent (used), Sanwa TRP 1060 Axia ref 2962 year 2010 max sheet size 740 x 1060 mm Hodpfx Aeytudcsaaek operating hours – 32,000 h cleaning section NON Stop at feeder register control R, L motorized impression setting

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. Hedjiklxbepfx Aaaek The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.