Used Die-Casting Machine for sale (66,990)

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Ledpfx Acsza E Rme Aern

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number Lrsdpfx Aewc Tdzoc Asn System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Lrodpjy E Tynsfx Ac Aon Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot consistency. Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC suitable for DAW 50F and W50Zn

Condition: new, Year of construction: 2023, Electric furnace MELTEC Typ ZC80/180F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 80/180 F ECO V2 Lrodpfxjy E Tyhs Ac Aen suitable for DAW 80F and W80Zn

Condition: new, Year of construction: 2022, Electric furnace MELTEC Typ ZC20/120F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 420,0 kg/Zn Melting capacity: 120,0 kg/Zn/h Electrical connection: 21,5 kW Type: ZC 20/120 F ECO V2 Lrodpfxey E Tybj Ac Asn suitable for DAW 20F and W20Zn

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g Lrsdpfxjy Diaus Ac Asn used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Ljdpfx Acowywn Ee Asrn

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Ledpfx Acjzg D I No Asrn Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Condition: used, Year of construction: 2008, Fully functional machine with low operating hours; it was only used sporadically as a backup machine in our toolmaking department. Ledpezgih Iefx Ac Aern

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Lrsdpfx Acoya Iaqo Asn Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Lrodpfx Ashktttec Ajn Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Lrodpfxeb A Nc He Ac Asn -operated: pneumatically -Year of manufacture: 1995

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 858799A, Manufacturer: Ruiyang Printing Machinery Co., Ltd., China Model: MH-1650 Machine Category: Die Cutting & Creasing Machine Machine Type: Automatic Large Format Die Cutter Year of Manufacture: 2014 Serial Number: 858799A Technical Specifications: Lodpfx Acow Rb Ipe Ajrn - Max. Sheet Size: 1650 x 1210 mm - Min. Sheet Size: 650 x 550 mm - Max. Die Cutting Size: 1620 x 1190 mm - Speed: up to 3,200 sheets/hour - Power Supply: 380 V, 50 Hz, 3 phases Features: - Automatic feeder with suction head - Large format pile delivery - Heavy-duty design for carton and corrugated board - Control panel with management and safety functions - Suitable for large format packaging production

Condition: used, Punching machine for, e.g., slipcases with many punching dies Ledpsxw N Ntsfx Ac Aorn

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Lrodpowi Tc Rsfx Ac Aon Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm output pieces/min: 100 Location: In our warehouse

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm Lsdox Ndu Dspfx Ac Aern • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible. Lredpfezb Nlwex Ac Asn

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Lrsdpfozgc Ubjx Ac Aen Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 Ljdpfx Acswbvmij Aorn V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Lrodpfehmmfkjx Ac Asn Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Ljdozfwxxspfx Ac Aern Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Ledpfjxpqy Dsx Ac Aern Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides Lsdpfx Acey Szlxo Ajrn 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides 2 rotary punches, numerous adjustment options Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation Lsdjy Syivspfx Ac Asrn The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. Ljdpeiklxbofx Ac Asrn The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.