Used Disassemble for sale (848)

Condition: used, functionality: fully functional, Year of construction: 2016, total height: 3,800 mm, total length: 4,450 mm, load capacity: 400 kg, throat depth: 4,000 mm, working height: 2,500 mm, DGUV certified until: 01/2027, -WAG 907- For sale is a pillar swivel crane from the manufacturer Vetter, model PS5-4.0. The pillar swivel crane is fully functional. A data sheet with all dimensions can be found in the images. Technical data: Manufacturer: Vetter Model: PS5-4.0 Year of manufacture: 2016 Max. load capacity: 400 kg Speed levels: 2 Giodpfxszk D Eij Alhow Outreach: approx. 4000 mm Overall height: approx. 3800 mm Working height: approx. 2500 mm Dimensions of base plate: Ø approx. 630 mm The functionality cannot be tested on-site, as the pillar swivel crane has already been completely disassembled. In addition to this pillar swivel crane, we have other pillar swivel cranes with maximum load capacities between 100 kg and 1000 kg and up to 5000 mm outreach in stock.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,336 h, functionality: fully functional, Arizona 1280GT flatbed printer Purchased new from Canon in 2019. The printer is in full working condition and can be demonstrated in operation. It will be available within 2 months. Covered by a maintenance contract with Canon. White inks can be replaced if required. Godpfx Aljyrn H Uehsiw 125 cm (W) x 250 cm (L) x 48 mm (thickness) Edge-to-edge (full bleed) printing True flatbed with vacuum table for securing rigid media or objects True roll-to-roll printing (with Roll Media Option) Variable droplet sizes from 6 to 42 picolitres. The ability to reduce drop size to 6 picolitres enables sharp images with smoother gradients and quarter-tones. The capability to jet larger droplets up to 42 picolitres ensures uniform color fills. The result is near-photographic print quality, with sharpness previously only seen at 1,440 dpi resolutions or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode). Transport, assembly and disassembly are the responsibility and risk of the buyer. The machine is 100% operational.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: STYLE-5-488, turning diameter over cross slide: 300 mm, turning length: 2,000 mm, turning diameter: 510 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 15 rpm, spindle motor power: 11,000 W, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rotational speed (min.): 15 rpm, rotational speed (max.): 2,500 rpm, feed length X-axis: 2 mm, feed length Y-axis: 2 mm, quill travel distance: 160 mm, quill diameter: 75 mm, turning diameter over bed slide: 510 mm, turning diameter over top slide: 300 mm, type of input current: three-phase, overall weight: 3,250 kg, swing diameter over bed slide: 300 mm, Equipment: rotational speed infinitely variable, For sale: STYLE 510 x 2000 CNC Teach-In lathe from 2006. Gijdpfxszhl E Es Alhow This robust CNC lathe combines a turning diameter of 510 mm with a distance between centers of 2,000 mm. This makes the machine particularly suitable for turning longer shafts, sleeves, flanges, structural components, repair work, and custom parts in small or medium-sized series. The machine is equipped with a closed machining enclosure, three-jaw chuck, Pragati tool turret, tailstock, and STYLE Teach-In control. The combination of CNC-controlled operation and direct manual control makes the machine accessible to both conventionally experienced lathe operators and CNC operators. The lathe is in working order, fully functional, and still set up in our production facility. It has not been disassembled and can therefore be inspected and tested while powered on. Selling because it is no longer needed in our production. Tool holders, drill chucks, individual cutting tools, measuring tools, clamping devices, and other accessories visible in the photos are only included if explicitly agreed upon.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: A92W021000486, color channels: 4, resolution (max.): 1,200 dpi, paper weight (min.): 52 g/m², paper weight (max.): 400 g/m², paper width (max.): 330 mm, paper height (max.): 1,300 mm, number of feeding trays: 3, counter reading (black): 283,179, counter reading (color): 4,825,446, type of input current: three-phase, input current: 25 A, input voltage: 230 V, Equipment: auto duplex, documentation/manual, Konica Minolta AccurioPress C6100 digital printing system, manufactured in 2018, in well-maintained condition. The machine is fully functional and currently in production-ready condition. All maintenance has been performed regularly by the service partner Faber. From a non-smoking environment. Equipment: - Fiery IC-315H controller - IQ-501 Intelligent Quality Optimizer - PF-707m large-capacity paper feeder with 3 trays - RU-518 relay unit - FS-532 finisher - LS-506 large-capacity stacker - Duplex printing - Print resolution up to 1,200 dpi - Paper weights from 52 to 400 g/m² Counter readings as shown in the photo: - Total counter: 5,108,625 - Full-color counter: 4,825,446 - Black and white counter: 283,179 - Printer total counter: 5,095,930 For sale due to insufficient utilization, as a second machine is also in use. The machine can be inspected and tested in Düsseldorf by appointment. Giodpfx Asziz Eqolhow Product photos and videos are available. For sale to commercial buyers only. Disassembly, collection, and transport are the responsibility of the buyer. Payment required before loading.

Condition: good (used), Year of construction: 2017, Pallet racking system, Jungheinrich, frame height min. 9.55m, 700kg / pallet location, approx. 6,175 locations, incl. existing support grates, etc. - used -: Price ex works: €75,000 (net), disassembled, packed, and loaded! Price for larger quantities: upon request! Gsdpfxozg Eaae Alhjiw Manufacturer: Jungheinrich Type: MPB Year of manufacture: 2017 Number of frames: approx. 288 units Upright profile: B18PS Frame depth: approx. 1.10m Racking height: min. 9.55m (according to nameplate, colleague measured 10.20m) Crossbeams: Length: 3.60m = approx. 2,520 units (profile E0414/15) Length: 2.70m = approx. 10 units Crossbeam height: approx. 15cm Load capacity per level / shelf load: 2,800kg = 700kg per pallet Field load: 14,000kg with 1st support at 2.05m Support grates: approx. 2,520 units for approx. 840 levels Dimensions of support grates: approx. Depth: approx. 1.12m x Width approx. 1.18m (= 3 units per 3.60m crossbeam level) In case of complete purchase, including existing end protection / side protection, spacers, and 2,520 support grates, etc. Condition: good Available: from approx. end of August 2026 Location: Euskirchen

Condition: excellent (used), Year of construction: 1985, pressure 25 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : MABU (D) High Speed 4 Column Automatic Punching Press model 25 VP / RC year 1985 Press force nominal 25 to Punching Speeds 120 - 600 strokes/min Stroke length adjustable 7 - 62 mm Ram adjustment range 50 mm Mounting height 225 - 310 mm Table size 560 x 640 mm Distance between columns sides 320 / 340 mm Distance between columns front/back 380 / 400 mm Opening in table / clamping plate 120 x 230 mm Ram clamping plate size 240 x 280 mm MABU Strip feed RACER 11 Max. strip width 150 mm Max. feed stroke 120 mm Main drive approx. 3 kW Total drive approx. 3,5 kW - 380 V - 50 Hz Weight approx. 2.400 kg Accessories / Special Features: • MABU Strip feed device model RACER 11 RCTF, mounted on the left side, stroke adjustable, infeed height adjustable, • Automatic continuous stroke and single stroke available as well as inching mode, piece counter, blow out device • Sep. control cabinet and switch cabinet, Vibration dampening machine shoes • Large, soundproof cabin (disassembled) • Various accessories, manuals and former safety test reports Condition : very good, press was regularly maintained ! Giedpozbu Spefx Alhsw Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of all kinds of presses available. Please let us know your requirements.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 624826/01, total height: 4,750 mm, total length: 3,350 mm, load capacity: 500 kg, throat depth: 3,000 mm, working height: 3,500 mm, DGUV certified until: 01/2027, -WAG 905- For sale is a column-mounted slewing crane manufactured by Vetter, model PS5-3.0. The column-mounted slewing crane is fully functional. A data sheet with all dimensions can be found in the images. Technical data: Manufacturer: Vetter Model: PS5-3.0 Year of manufacture: 2016 Maximum load capacity: 500 kg Speed settings: 2 Outreach: approx. 3000 mm Overall height: approx. 4750 mm Working height: approx. 3500 mm Dimensions of base plate: Ø approx. 530 mm The functionality cannot be tested on site, as the column-mounted slewing crane has already been completely disassembled. Giodozkvddjpfx Alhjw In addition to this column-mounted slewing crane, we have other column-mounted slewing cranes in stock with maximum load capacities between 100 kg and 1000 kg and up to 5000 mm outreach.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 624826/12, total height: 4,750 mm, total length: 3,350 mm, load capacity: 400 kg, throat depth: 3,000 mm, working height: 3,500 mm, DGUV certified until: 01/2027, -WAG 904- We are offering a column-slewing crane from the manufacturer Vetter, type PS5-3.0. The column-slewing crane is fully functional. A data sheet with all dimensions can be found in the images. Technical data: Manufacturer: Vetter Type: PS5-3.0 Year of manufacture: 2016 Gedpfezku Rvjx Alheiw Max. load capacity: 400 kg Speed settings: 2 Outreach: approx. Overall height: approx. 4750 mm Working height: approx. 3500 mm Dimensions of baseplate: Ø approx. 530 mm The functionality cannot be checked on-site, as the column-slewing crane has already been completely disassembled. In addition to this column-slewing crane, we have other column-slewing cranes with maximum load capacities between 100 kg and 1000 kg and up to 5000 mm outreach.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 625466/01, total height: 4,200 mm, total length: 5,700 mm, load capacity: 1,000 kg, throat depth: 5,000 mm, working height: 3,300 mm, DGUV certified until: 01/2027, -WAG 903- Offered here is a column-slewing crane from the manufacturer Vetter, type AS10-5.0. The column-slewing crane is fully functional. A data sheet with all dimensions can be found in the images. Technical data: Manufacturer: Vetter Type: AS10-5.0 Year of manufacture: 2016 Max. load capacity: 1000 kg Speed settings: 2 Gsdpezkuvljfx Alhsiw Outreach: approx. 5000 mm Overall height: approx. 4200 mm Working height: approx. 3300 mm Dimensions of base plate: Ø approx. 1450 mm The functionality cannot be checked on-site, as the column-slewing crane has already been completely disassembled. In addition to this column-slewing crane, we have other column-slewing cranes with maximum load capacities between 100 kg and 1000 kg and up to 5000 mm outreach.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 624826/10, total height: 4,700 mm, total length: 4,500 mm, load capacity: 1,000 kg, throat depth: 4,000 mm, working height: 3,000 mm, DGUV certified until: 01/2027, -WAG 902- Offered here is a pillar-mounted swivel crane from the manufacturer Vetter, type PS5-4.0. The pillar-mounted swivel crane is fully functional. A data sheet with all dimensions can be found in the images. Technical data: Manufacturer: Vetter Type: PS5-4.0 Gsdpfezkurasx Alhsiw Year of manufacture: 2016 Max. load capacity: 1000 kg Speed settings: 2 Outreach: approx. 4000 mm Overall height: approx. 4700 mm Working height: approx. 3000 mm Dimensions of base plate: Ø approx. 980 mm The functionality cannot be checked on-site, as the pillar-mounted swivel crane has already been completely disassembled. In addition to this pillar-mounted swivel crane, we have other pillar-mounted swivel cranes with maximum load capacities between 100 kg and 1000 kg and up to 5000 mm outreach.

Condition: used, Year of construction: 2007, functionality: fully functional, space requirement width: 2,300 mm, space requirement length: 3,500 mm, space requirement height: 4,200 mm, conveyor belt width: 850 mm, -WAG 916- We are offering a small shot blasting machine from the manufacturer Wheelabrator. The shot blasting machine, type MB-100, is fully functional. Space required (length): approx. 3500 mm Space required (width): approx. 2300 mm Space required (height): approx. 4200 mm Gedpfxozkub Uj Alheiw Conveyor belt width: 850 mm The shot blasting machine has been completely disassembled and cannot be tested while powered.

Condition: used, Material: stainless steel Double screw: 2 nylon brushes in two sections: Ø 200 mm x 3000 mm Quick disassembly Giodpfx Aozg I Tvolhew Mounted on a mobile frame: 4 wheels Power: 0,55 kw Speed controller : mechanical Support for feeders and dosing systems Overall dimensions 3800 x 550 x 1700

Condition: like new (used), Year of construction: 2023, load capacity per storage section: 1,000 kg, total height: 8,000 mm, total width: 1,200 mm, shelf height: 8,000 mm, support length: 3,600 mm, frame height: 8,000 mm, frame width: 1,200 mm, For sale is a high-quality Nedcon pallet racking system manufactured in 2023. The system is in very good condition, has already been completely disassembled, and is packaged for transport. System data: 3 double rows 1 single row Frame height: 8,000 mm Frame depth: 1,200 mm Beam length: 3,600 mm Load capacity per bay: 4,000 kg Gjdezi Srbepfx Alhsiw Completely equipped with grating Scope of delivery: 78 frames, 8,000 x 1,200 mm 680 beams, 3,600 mm 680 grating panels, approx. 1,800 x 1,200 mm The racking system offers storage space for a total of 1,644 Euro pallets. The system is ideally suited for warehouses, logistics centers, or industrial companies and is available immediately.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Godpfx Alezizkyshjiw Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Gisdszhudqspfx Alhsw Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Year of construction: 2017, condition: ready for operation (used), Plastic processing machine manufactured in 2017. This Stratasys Fortus 450mc features a normal print head and an additional fully functional Nylon CF print head. It includes various build sheets and nozzles, along with partially used material canisters. Please note that the machine requires some repairs to be fully operational. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Fortus 450mc machine we have for sale. Contact us for further details. Gijdozhnv Hjpfx Alhjw • Condition: Not fully operational • Humidity sensor failed and needs replacement • Machine incorrectly detects installed material; requires clearing in engineering menu • Normal print head: support material motor needs replacement • Configuration: Normal print head installed (support motor faulty) • Disassembly/transport: Top canopy removed for relocation; easy to reassemble • Software: Compatible with GrabCAD Print and Insight slicer (downloadable from Stratasys website) Additional equipment • Additional Nylon CF print head with carry box (fully functional) • Clean Station tank for dissolving support material (needs new pump; one hose broken) • Approx. 20 used and some unused nozzles • Approx. 15 canisters of partially used material • Build sheets: 4 ULTEM, 8 ABS, 7 Nylon CF

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 160-300, Selling a used Union Bielefeld Flutemaster UF 5.2 CNC milling machine. Year of manufacture: 1990. Condition: used, see pictures. Inspection and collection possible by arrangement. The buyer bears the costs and responsibility for disassembly/loading and transport. Godszkp Ebjpfx Alhsiw If interested, please send a price inquiry.

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Giedpszkuirjfx Alhjw Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up disc changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the machine mentioned above: Replacement of the ball screw drive and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screw drives of the tank drive. Gedpszgckvefx Alhsiw Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and the control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is immediately ready for use and is ideally suited for reliable production operation.

Condition: refurbished (used), Benhil 8358 & 8535 Butter Portion Packer with twin filling/ /Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute Benhil 8358 Twin Filling Butter Portion Packer Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight. Fully Refurbished 12 months ago spent over € 200.000 Key Features: - Portion Control: Benhil packing machines are designed to package butter in accurate, portion-controlled sizes, which is essential for food service operations. - Flexible Options: They often accommodate different types of butter packaging, including mini portions or larger units, catering to various market needs. - Automation: Many of these machines feature automated systems for filling, sealing, and labeling, which helps to increase efficiency and reduce manual labor. - Integration: They can typically integrate with other food processing equipment in a production line, such as mixers or chillers. - Customization: Options for customization may be available based on output requirements, packaging materials, and specific market needs. Technical Aspects: - Speed: The packaging speed can vary depending on the specific machine model, with some machines capable of filling hundreds to thousands of units per hour. - Ease of Cleaning: The machines are designed for easy disassembly and cleaning, complying with food safety standards. - Energy Efficiency: Modern Benhil machines may focus on energy efficiency, reducing operational costs. - Durability: Built to withstand high volume production environments, they are made from high-quality stainless steel and other durable materials. Godpfx Alozavu Aehjiw Applications: - Food Service: Used in restaurants, hotels, and catering services for packaging butter portions for table use. - Retail: Often used for packaging butter for supermarket sales in portioned formats. Paper feed: 90 degree Hopper: Stainless steel Guards: Electro Guards Case Packing: 5 x 8 x 5 pcs 200 per box Capacity: 420-510 pcs per minute Case Packer: Included Filling Volume: 6 - 20 grams Condition: Fully refurbished 12 months ago Latest Production: 2 months ago Electrical Requirements: 3 phase 400 v/50 and 60 hz USA ELECTRICAL REQUIREMENTS: Available upon request Available: Immediately Case Packer Model : 8342

Condition: good (used), Year of construction: 2022, Pallet flow rack / or flow rack for pallets 1m x 1.20m, max. 350kg, 90 – to 108 spaces – used: Price ex works: now only €25,000 instead of €35,000 (net), including disassembly etc.! Manufacturer: Bito Type: PDS flow rack system Year of manufacture: June 2022 Container: Wooden pallet: 1000x1200mm CP1 pallet: 1000x1200mm Storage: lengthwise Height including pallet: max. 1850mm Gisdpszd T Slsfx Alhsw Pallet weight: min. 150kg / max. 350kg Depth of the racks: 17.76m Width: 2.73m Frame height: rear: 7,085mm, front: 6,005mm Roller track width: approx. 1,072mm 2 bays side by side 3 levels per channel 4% incline Condition: very good Available: immediately Location: D-59227 Ahlen-Vorhelm Plan available as a PDF – we will gladly send it upon request!

Condition: used, total height: 2,650 mm, total length: 7,200 mm, total width: 2,000 mm, Colour: Grey Empty weight: 1.200 kg - Details: - └ Description: Without control cabinet and fan - Documentation available: No Gjdpfx Alozcnqnohjiw - CE certificate present: No - Number of filter bags [pcs]: 75 - Filter length [mm]: 2200 - Filter diameter [mm]: 200 - Filter surface area [m²]: 108 - Connection diameter [mm]: 450 - Disassembled: Yes - Collection bags: Yes - Number of bins/bags [pcs]: 6 - Transport dimensions: 7200mm x 2000mm x 2650mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Table length: 5,000 mm Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg Giodpszdtxfjfx Alhow EQUIPMENT Hydrostatic guideways in all axes Tool holders Coolant preparation/filtration system Chip conveyor Cooling system, manufacturer: Deerosdassi Control cabinet system Note: The machine has already been professionally disassembled and is in storage.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Gisdpfezdttpox Alhew Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 EQUIPMENT Tool changer

Condition: used, Available quantity: 6 units Removed from a production facility of an automotive supplier, professionally disassembled. Giodpfozggt Iox Alhew Siemens POWER MODULE SINAMICS G120D PM250D 6SL3525-0PE23-0AA1 Version: FS:C02 including Siemens SINAMICS G120D Control Unit CU240D 6SL3544-0FB20-1FA0 Version: B01 / V4.7