Used Disassemble for sale (949)

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: DN855, Technical data: 1 Schmalz – Column-swiveling crane NL 50KG – Year of manufacture 2023 Payload at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for other tools) Overall height: approx. 3.75 m, extension: approx. 4.6 m, lower arm extension: approx. 3.2 m Lifting height: approx. 0.25 m – 2.2 m Base plate: approx. 50 x 50 cm Total weight approx. 300 kg including vacuum unit Connection to 400V, 16A, swiveling range 270° Nwsdpjzv Ekdefx Afwok Crane is disassembled and packed on a pallet Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition – almost new. See pictures Shipping via freight forwarder or collection by appointment

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN-HB160-250KG, ABUS HB overhead crane system with dimensions of approximately 19 x 4 m (4 m span) Extending the runway rails is possible! Load capacity / lifting capacity: 250 kg - 0.25 tons - increasing the load capacity up to 1000 kg is possible! Technical data of the system: Nedpjzv Ea Sefx Afwowk Crane system with ABUS HB160 rails The system is delivered complete: HB rails, rail connectors, carriages, travel drive in the span, end plates, supports/hangers, etc. Including a 250 kg ABUS chain hoist - lifting height approximately 4 m The crane is disassembled and immediately available. Used condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity: 125 kg - 1600 kg. Please request a non-binding quote for your crane system, specifying the load capacity and dimensions.

Year of construction: 1989, condition: good (used), machine/vehicle number: divx, DEMAG KBK crane canopy crane runway rails 1000 + accessories Payload / lifting capacity 80Kg - 2000KG The item is supplied complete: KBK 2 rails, rail connectors, trolleys, end plates, brackets/hangers Nwjdjty Tkzjpfx Afwok Rails and accessories are disassembled and immediately available. This item is only sold complete. Full volume approx. 2 truckloads - approx. 22000KG Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or pickup by appointment only

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Nedpfx Afjwgwrqowewk Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Condition: used, Offered is a disassembly table with plastic boards. Nwjdpfexapn Uox Afwjk Disassembly work table with dimensions L: 200 cm / W: 90 cm / H: 110 cm 8 units available. Further information upon request. Payment in cash or advance payment. Sale to commercial customers only. No guarantee, no warranty.

Year of construction: 2014, condition: used, functionality: fully functional, We offer this used trade fair stand made of stainless steel, manufactured in 2014. Manufacturer: IMW - Wolfgang Müller Model: MesseStand Year of manufacture: 2014 Condition: used Nsdpfoyvr I Ssx Afwewk Machine type: Stainless steel trade fair stand Used trade fair stand, also suitable for use as a pavilion, sales stand, indoor stand, room divider, or sales counter. As shown in the parts drawing, it includes transport boxes and lighting, but excludes furniture, side panels (banners), a TV, and inventory (available upon request). This trade fair stand has only been used three times. Stainless steel with component elements painted in RAL 9005 and blue acrylic glass panels, size 5 m x 4 m, height 3 m. The trade fair stand is disassembled into 4 high-quality wooden transport boxes, each measuring 3.50 x 1.20 x 1.20 m. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2010, operating hours: 43,982 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,700 mm, total length: 3,500 mm, total width: 3,000 mm, table load: 800 kg, rotational speed (max.): 18,000 rpm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,992 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Note: We offer flexible financing solutions for all machines, as well as a professional relocation service. Disassembly, transport, and professional reassembly – all from a single source. Billing is based on individual terms and conditions and duration. Contact us for your personal offer. Nwodozudpispfx Afwsk

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options Njdpfx Aeyr Tlpofwswk The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: used, mileage: 36,702 km, power: 77 kW (104.69 HP), first registration: 10/2018, fuel type: diesel, empty load weight: 1,956 kg, maximum load weight: 844 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 2,933 mm, fuel: diesel, fuel consumption (urban): 7.4 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.4 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 4,972 mm, Year of construction: 2018, construction height: 1,970 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), sliding door, soot filter, traction control, Engine partially disassembled. Special equipment: Nodpfx Ajzvhyzofwowk Airbag, passenger side, Audio system: Radio with USB and Bluetooth hands-free system, Generator 240 A, Grab handle B-pillar, Interior filter: Pollen filter, Cargo area light LED, Parking pilot system front and rear, Seat package 10: Driver's seat (4-way adjustable) - passenger single seat including side airbag and seat heating, Fabric, Side airbag, Head-shoulder airbag front, Seats in the cab: Driver's seat heated, Seats in the cab: Passenger seat heated, Seats in the cab: Driver's seat with lumbar support, Interior trim in cargo/passenger compartment: half-height, Fleece battery 80 Ah (AGM, 2 batteries) Additional equipment: Airbag, driver side, Basic, Turn signal integrated in exterior mirror, On-board computer, Electronic brake force distribution (EBD), Electronic traction control, Driver assistance system: Intelligent acceleration control, Glove compartment lockable, Rear wing doors without glazing (opening angle 180 degrees), Body/superstructure: Box high-roof standard, Body variant: Medium-height roof, Steering column (steering wheel) height/length adjustable, Truck registration, Model upgrade, Engine 2.0 L - 77 kW TDCi CAT, Wheelbase 2933 mm, Spare wheel in driving condition, Low emission according to exhaust standard Euro 6, Windshield wipers with intermittent function, adjustable, Headlights H4, Sliding door cargo/passenger compartment right, Mud flaps front and rear, Side protection strips, Lashing eyes (8), Heat-insulating glass lightly tinted. Equipment determined with the help of a VIN query; technical errors may occur. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DN2383 / 2368, 1 Schmalz Column Swivel Crane 2 cranes available! Height 4.8m, length 3m, upper carriage boom 4m, hook height 3.6m Load capacity at full extension 350 kg Total weight approx. 500 kg including anchor plate 75x75 cm with 500 kg Schmalz chain hoist with floor control (with 2 lifting speeds) Nedpfx Afjzvuldswswk Connection to 400V 16A, swivel range approx. 270° Crane is disassembled and packed on a pallet Very good condition, almost new. See pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection by appointment

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2645 /4434, Technical specifications: Nodpszvrn Aefx Afwowk 1 Schmalz column-mounted swing jib crane, model NL 50KG, year of manufacture 2018 Crane is available in quantities of 2!!! Load capacity at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for additional workshop tools) Overall height: approx. 2.52 m, outreach: approx. 1.8 + 1.25 m, lower boom: approx. 2.35 / 2.5 m Base plate: 30 x 30 cm Total weight approx. 300 kg including vacuum unit Connection to 400V 16A, swivel range 270 + 90° Crane is disassembled and packed on a pallet Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost new. See pictures Shipping via freight forwarder or collection by appointment.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2380 500KG, ABUS Lightweight Portal Crane / Gantry Crane Type: LPK Load capacity/lifting capacity: 500 kg Crane girder/steel structure consisting of IPE200 beam / square tube 140x140, standing on 4 heavy-duty swivel casters (200 mm) with 500 kg ABUS GM chain hoist with trolley drive Overall height approx. 4.92 m Width approx. 7 m Bottom edge of running rail approx. 4.65 cm Depth approx. 200 cm Hook height approx. 4.2 m Crane is disassembled and immediately available. Njdpfxszvrg Se Afwewk The item is located in 75053 Gondelsheim. Very good condition, almost like new. See pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, fuel type: electric, construction height: 1,120 mm, drive type: Elektro, construction width: 890 mm, Scrubber Dryer Chassis Number: NR810NEU Condition: New unit Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 24V Battery Capacity: 200Ah Battery Type: Waterless Battery Year of Manufacture: 2025 Battery Condition: New Nsdpfx Afey Uph Hewewk Description: - Delivers efficient cleaning performance of up to 4,860 m² per hour. - Compact design with a low center of gravity, tight turning radius, and flexible operation. - Integrated waterproof touch panel with LCD display for showing operating parameters and error codes; facilitates parameter adjustment and fault diagnosis. - Three speed settings and adjustable water flow. - Proprietary controller featuring protection against motor overload and low battery, effectively extending the life of both motor and battery. - ECO mode to reduce suction motor power and noise level, ideal for noise-sensitive environments. - Electric one-touch lift function for brush and squeegee holders; squeegee holder is automatically lifted when reversing for safe and efficient operation. - Dual brush/pad design with innovative quick-connect system for brushes or pads, making them easy to load and unload. - 120-liter fresh and dirty water tank capacity reduces the frequency of filling and emptying. Automatic alarm when clean water tank is empty or dirty water tank is full. - Large opening reversible dirty water tank with tool-free disassembly for easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to stop automatically when the operator leaves the seat. - Non-slip, durable tyres for reliable traction and optimal grip, even on smooth or wet floors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4462 / 4520, 1 Schmalz – Column-swiveling crane with extension + Vacumaster Comfort Window The crane is available in 2 identical units!!! Load capacity at full extension: 200 kg Schmalz swiveling crane SK-KZG-CON (extending crane) load capacity 200 kg with suction lifter VM-Comfort-H-CON Suction cup diameter: 37 cm! Load capacity: 150 kg Year of manufacture: 2018 Overall height: approx. 3.35 m, reach: approx. 3.1 m + 1 m extension = 4.1 m Distance from the base to the upper boom: approx. 2.63 m Distance from the base to the upper boom: approx. 2.42 m Hook height, chain hoist: approx. 2 m Maximum height of suction lifter in the center: 1.7 m Base plate: 50 x 50 cm Total weight: approx. 400 kg Nsdpfx Afezvrcaowswk Connection: 400 V, 16 A, swiveling range: 270° The crane is disassembled and packed on a pallet. The item is located in 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Very good condition, almost like new. See pictures. Shipping by freight forwarder or collection by appointment.

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Nwsdpjzu Szyofx Afwsk

Condition: excellent (used), Year of construction: 1998, STRIEBIG panel saw, vertical, model II TRK 5220A, with Nestro NE 160 dust extraction unit. Used, in working condition, and in good condition. Panel saw: Year of manufacture: 01/1998 Type: Standard II TRK 5220A Saw carriage locking: manual Plunge cutting: manual Swivel adjustment 0 to 90°: manual Motor power: 4.4 kW Nwsdozvqryspfx Afwek Speed: 4750 rpm Saw blade diameter: 300 mm Panel saw dimensions: Length: 5030 mm Height: 2500 mm Depth: 430 mm The panel saw and the dust extraction unit must be disassembled by the buyer. Dust extraction unit Nestro NE 160 Three-phase power, 2.2 kW Filter area: 11.5 m² Collection tank volume: 185 liters Extraction nozzle diameter: 160 mm Nominal volumetric flow rate: 1780 m³/h Dimensions approx. 130 x 85 x 193 cm Price: €12,000 net Delivery and installation possible.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost. Nwjdeznmpxjpfx Afwsk

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, A used CNC jig boring machine SIP 640 FANUC control Nedpfoy R Nnlsx Afwewk Includes 80 tool holders Disassembly and loading are the responsibility of the buyer.

Condition: good (used), Year of construction: 2008, Used SCM Record 110 NT TVN Prisma Year of manufacture: 2008 (in operation since June 2009) 5-axis CNC machine Working area: 6110 x 1250 mm F18 drilling unit Rapid 24 tool changer Laser cross positioning aid UniClamps Nodpfjztxzqjx Afwswk Reinforced vacuum pump, 250 m3 Chip conveyor Machine is available immediately, disassembled and stored.

Condition: good (used), For sale: Nwsdpfx Aoua Dqijfwjk - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: new, 25-Meter SLP Pallet Racking System Spanning a total length of approximately 25 meters, the system comprises 9 bays, each with a clear bay width of 2,700 mm. This corresponds exactly to the standard width required to store three Euro pallets side-by-side. Special Rack Depth: The upright depth of 1,100 mm is the standard for longitudinal Euro pallet storage. Thanks to the extended upright depth of 1,700 mm and the use of deep grating decks (1,700 x 890 mm), this system is ideally suited for non-standard dimensions, transverse storage, or order picking operations. Capacity & Load Ratings: With 6 levels (including the floor level), the system accommodates a total of 162 pallets. The maximum bay load capacity of 3,000 kg allows for a heavy load of up to 1,000 kg per pallet. The maximum total bay load is 15,000 kg. Technical specifications at a glance: Manufacturer: SLP (Saar-Lager- und Profiltechnik) Type: SL25 Total length of rack run: approx. 25.15 meters (9 bays at 2,700 mm + upright width) Rack height: 7,150 mm Total rack depth: 1,700 mm (upright depth 1,100 mm + 600 mm upright extension) Clear bay width: 2,700 mm (perfect for 3 Euro pallets per level) Number of bays: 9 bays Number of storage levels: 6 levels (5 beam levels + floor level) Total pallet spaces: 162 spaces Max. bay load (per level): 3,000 kg (with evenly distributed load) Max. total bay load: 15,000 kg Njdpfx Afjzrlxmswewk Scope of delivery: 10 x SLP pallet rack upright frames, blue, 7150 x 1100 mm 10 x SLP pallet rack upright frames, blue, 7150 x 600 mm 135 x Mesh deck panels, 1700 x 890 mm 42 x SLP pallet rack beams, orange, 2700 mm Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (compliant with DIN EN 15635) Safety is a legal requirement. We conduct the mandatory annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Preparation of a legally compliant inspection report, including an inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (Type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed across 4 levels, each accommodating 3 Euro-pallets side-by-side with a bay width of 2,700 mm). The system consists of 1 starter bay and 7 add-on bays, resulting in a total length of approx. 22 meters. Thanks to the grating decks, the racking is extremely versatile—suitable for general cargo, order-picking stock, or damaged pallets. Included push-through guards and rear mesh panels ensure maximum safety. They provide perfect protection against pallets or loads being pushed through accidentally or falling off. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Levels: 4 (including floor level) Beam type: INP 100 Bay load: 3,000 kg Section load: 14,000 kg Scope of delivery: 09 x Upright frames 6,200 x 1,200 mm (blue) 48 x Pallet rack beams 2,700 mm (red) 24 x Push-through guards 2,700 mm 32 x Rear mesh panels 2,700 x 1,200 mm 48 x Grating decks 1,330 x 1,200 mm Nsdszrlp Sjpfx Afwjwk Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (DIN EN 15635) Safety is a legal requirement. We conduct the annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Issuance of a legally compliant inspection report and inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2019, Schulte Lagertechnik Pallet Racking – Starter Bay Manufacturer: Schulte Lagertechnik Rack type: Starter bay Upright type: S610-M18 Total length: 2700 mm Rack height: 4500 mm Rack depth: 1100 mm Clear bay width: 2700 mm Beam type: LNS-Duo 110 x 50 x 2700 mm Number of storage levels: 4 (incl. floor level) Number of bays: 3 Nsdjzrlkvopfx Afwowk Max. beam load: 2580 kg Max. bay load: 8200 kg Pallet spaces: 12 Scope of delivery: 02 x Schulte pallet rack uprights 4500 x 1100 mm (blue) 06 x Schulte pallet rack beams 2700 x 110 x 50 mm, 2580 kg (orange), incl. locking pins Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive one-stop service: Assembly & Disassembly Whether for new installations, reconfiguration, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racks (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Rack Testing & Inspection (DIN EN 15635) Safety is a legal requirement. We conduct the annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Preparation of a legally compliant inspection report, including an inspection sticker. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Nodpfxjy Iwdpj Afwswk Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: TK4S35322107121, working width: 3,200 mm, cutting speed: 90,000 mm/min, sheet thickness (max.): 50 mm, working length: 3,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Suitable materials: corrugated cardboard, cardboard, foam boards, films, label material, textiles, honeycomb panels, and other non-metallic materials Previous area of application: textile cutting Working area: 3,500 x 3,200 mm Max. material thickness: 50 mm Nsdjzpxg Eopfx Afwowk Max. working speed: 1,500 mm/s MACHINE DETAILS Condition: disassembled Rated voltage: 380 V Mains frequency: 50/60 Hz Rated power: 24.38 kW EQUIPMENT - Vacuum table - Powered rotary tool - Drag knife - Pin tool - Camera system - Conveyor system - Roll loading device - Workstation with computer and software