Used Disassemble for sale (698)

Condition: reconditioned (used), functionality: fully functional, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, HERMINGHAUSEN SR4 - OVERHAULED Hedpey Hf Dbefx Apnefg High-precision and conventional centerless grinding machine. The machine is suitable for grinding workpieces up to 125 mm diameter. High machine and grinding stability thanks to a robust cast bed and hydrodynamic segment jaw bearing. The low construction height ensures excellent accessibility to all important functions. The machine can be quickly and easily retooled for different workpieces and materials. Feed adjustment is performed with micron-level precision via coarse and fine adjustment. The grinding gap can be easily set by swiveling the bearing angle. Grinding wheel diameter: 500 mm x width 250 mm. The machine has been disassembled, defective parts replaced, repainted, and rebuilt. It is in very good mechanical and electrical condition and is immediately ready for operation. Commissioning and training/instruction on the machine and grinding technology is available.

Condition: good (used), Year of construction: 1997, functionality: fully functional, clear span: 19,000 mm, load capacity: 300 kg, For sale is a used Mecalux mezzanine storage system / multi-tier racking installation, consisting of frame racks with two walk-on mezzanine levels, stairs, and peripheral handrails. The system makes optimum use of the hall height and is ideal for carton storage, small parts storage, order picking, or light assembly work. Technical data: • Manufacturer: Mecalux • Year of manufacture: 1997 (per nameplate) • Type: 3-level racking system with 2 mezzanine floors • Footprint: approx. 19.0 m × 7.8 m ≈ 148 m² Levels / Surfaces • Ground floor (rack level): • Base area approx. 19.0 × 7.8 m (≈ 148 m² storage area) • Clear usable height below 1st mezzanine: approx. 3.10 m • 1st upper floor / 1st mezzanine: • Gross area approx. 19.0 × 7.8 m ≈ 148 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 142 m² • Clear headroom above: approx. 2.70 m, in areas with braces (approx. 0.50 m) approx. 2.30 m • 2nd upper floor / 2nd mezzanine: • Depth mostly approx. 5.90 m, width approx. 19.0 m • Gross area approx. 112 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 109 m² ➡️ Total usable area of both mezzanines: approx. 399 m² Stairs & Handrails • 2 × stairs, each • Width approx. 1.0 m • Length approx. 6.0 m • Stable steel steps with anti-slip markings • Handrails on both sides • Continuous handrails on the mezzanine levels • Additional safety by chains at access points Decking & Load Capacity • Mezzanine decking: robust wooden flooring / panel covering • Permissible load per nameplate: 300 kg/m² Lighting • Areas above the mezzanines are equipped with lighting, so the mezzanine levels are already illuminated. Condition • Very well-maintained, lightly used condition Hsdpfx Apsx Dtuajnofg • Despite its 1997 year of manufacture, the system appears nearly as new • Mainly just dust on the floors, no visible structural damage to frames, handrails, or stairs • Nameplate present, data legible Location & Handling • Location: 59227 Ahlen • Availability: by arrangement, short-term possible • Viewing: possible by prior appointment Disassembly & Transport • Disassembly by the buyer. • Support with disassembly and loading can be arranged for an extra charge upon agreement. • Transport to be organized by the buyer.

Year of construction: 2015, condition: ready for operation (used), Complete VEMAG Hamburger Production Line Manufacturer: VEMAG Maschinenbau GmbH – Germany Line Model: Roobot 500 + FM250 + SC261 Equipment Set Condition: Used, very good Year of manufacture: 2015 / 2020 Set Description The offered VEMAG hamburger production line is a fully automated system designed for forming, portioning, and arranging meat, poultry, fish, or plant-based burgers. Equipment from the renowned manufacturer VEMAG ensures high output, precise portioning, and excellent shape consistency, all while maintaining high hygienic standards in production. The line consists of three main components: 1. VEMAG ROOBOT 500 Filler (year 2015) Automatic feeding system – the main drive of the line. Controls the movement and dosing of filling to the forming machine. Equipped with a supply system with precise portion control. Ensures consistent performance and weight accuracy. Made of stainless steel with a hygienic design suitable for pressure washing. Key technical data: Output: up to 6,000 portions/h (depending on raw material) Portion range: 20 to 300g Drive: electric / pneumatic 2. VEMAG FM250 (year 2020) Burger former – the latest element of the line. Forming burgers, patties, meatballs, plant-based and fish products. Hfedjy Rp Tbepfx Apnog Variable shape and thickness – matrix dies easily exchangeable. Integrated forming plate system with adjustable size. Ideal for precise forming of products with a premium surface finish. Technical data: Burger diameter: 60–130 mm Output: 100–180 cycles/min Material: AISI 304 stainless steel Integration with Roobot 500 3. VEMAG SC261 (year 2015) Belt reception conveyor / separator: Receives formed products and arranges them in rows. Variable belt speed and direction. Easy disassembly and cleaning. Technical data: Material: stainless steel Control: electronic; compatible with FM250 Line applications Production of meat, poultry, fish, and plant-based burgers Food processing, meat, and convenience food plants Ready-meal and fast-food manufacturers Even portioning for freezing or MAP packaging Complete, ready-to-use set – full device compatibility High productivity and repeatable product quality Low noise emission, easy-to-clean construction Suitable for various masses: meat, vegetarian, fish Optimized raw material usage and staff efficiency Fully hygienic all-stainless-steel construction Modern control panel and process parameter adjustment

Condition: used, Year of construction: 2006, machine/vehicle number: 409/1335, K+G Wetter D114 Meat Grinder – Powerful, Reliable, Ready for Immediate Use For sale is a professional industrial meat grinder K+G Wetter D114, ideally suited for butcheries, meat processing, catering, and production facilities. Condition: Used, very well maintained. Regularly serviced, technically flawless, and ready for immediate operation. Features: - Processing of fresh and chilled meat - Compatible with various hole plates (different degrees of grinding) - Reverse function to prevent blockages - Continuous product feed - Consistent, high-quality mincing results without overheating - Suitable for integration into production lines - High throughput rate Characteristics & Benefits: - Powerful industrial motor - High capacity for large volumes - Stainless steel housing – hygienic and easy to clean - Simple and intuitive operation - Reliable continuous operation - Quick and easy disassembly for cleaning and maintenance Hedpfx Ajy Em T Ujpnjfg This machine is the ideal solution for professional users who value quality, efficiency, and reliability.

Condition: good (used), Year of construction: 2018, Desk, work table, assembly bench, assembly table, workbench, multi-purpose table -Manufacturer: Ceha, Multi-purpose table type PM-120-60 -Width: 1200 mm -Depth: 600 mm -Height: 720-750 mm Hfjdpfxjywuvzj Apnjg -Load capacity: 100 kg -Table: easily disassembled / storable -Number: 11 tables available -Price: per piece -Transport dimensions: 1200/600/H72 mm -Weight: 16 kg/pc.

Condition: used, mileage: 157,000 km, power: 316 kW (429.64 HP), first registration: 04/2003, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: other, gearing type: semi-automatic, emission class: euro3, Year of construction: 2003, Equipment: ABS, electric window regulation, power assisted steering, power mirror, = Additional options and accessories = - EPS with coupling - Immobilizer - Lift Axle - PTO - Radio - Sper - Steering axle = Remarks = Structure Volume: 13 m3 Mercedes Actros 2543, 2003, 157,000 km Euro 3, 6x2 with Steering axle, Kroll construction, High-pressure pump disassembled, Not fully functional = More information = Cab: single Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering GVW: 26.000 kg Make of bodywork: Kroll = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Hodpfxjyzh Rte Apnsfg - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: GER, Technical data: 1 Abus VS column-mounted slewing crane, nominal load 500 KG Maximum load at full outreach: 500 KG / 0.5 tons Height: approx. 3.8 m, under jib: approx. 3.4 m Hedsy Hgnnspfx Apnjfg Outreach: approx. 4 m, hook height: approx. 3 m Base plate approx. 60x60 cm Total weight approx. 700 kg Including Abus GM4 chain hoist (year of manufacture 2018) with pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 360° Crane is disassembled and immediately available Article location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via forwarding agent or collection by appointment

Condition: used, Year of construction: 2004, functionality: fully functional, Vecoplan VAZ 800 XL Shredder | 22 kW | Year of construction 2004 | Good condition | incl. spare knives For sale is a used, fully operational single-shaft shredder from Vecoplan, model VAZ 800 XL. The machine is ready for immediate use and can be inspected and tested on site at any time. ⚙️ Technical Specifications Manufacturer: Vecoplan Model: VAZ 800 XL Year: 2004 Drive power: 22 kW Rotor diameter: approx. 370 mm Power supply: 400 V / 50 Hz Serial number: 9292010 Feed hopper height: approx. 2500 mm Feed hopper dimensions: Length 1800 x Width 1000 mm All cutting crowns are present and, due to regular maintenance, the shredder shaft runs smoothly and reliably. ✅ Features & Highlights ✔️ Automatic fill level control (starts only when sufficient material is present) ✔️ Quick-change knife system Knives can be used on three sides Currently, the knives still have usable life left ✔️ New counter knife included ✔️ Heavy-duty industrial design (Vecoplan standard) ✔️ Maintenance-friendly construction ✔️ Ideally suited for continuous operation 🪵 Areas of application Perfectly suitable for: - Wood waste / solid wood - Chipboard / MDF - Production waste - Plastics (depending on configuration) 🛠️ Condition Technically: perfect / fully functional Appearance: used, with normal signs of wear The machine was last running in production without any issues 📍 Inspection & Collection Location: 36367 Wartenberg Inspection under power is possible Hfedpfoy Exchjx Apnjg Loading assistance can be provided This machine is offered as a used unit. Sale is made under exclusion of any liability for material defects. The machine is sold as inspected and under exclusion of any warranty. The seller assumes no guarantee for operational condition, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of willful intent or gross negligence by the seller. Dismantling and Transport Dismantling of the machine is the responsibility and at the expense of the buyer. The buyer assumes all costs and risks for disassembly, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest upon commencement of dismantling or loading. Other No liability is assumed for hidden defects. All details regarding the machine (e.g. year, operating hours, technical data) are given to the best of our knowledge, but without guarantee.

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Hsdpfxey Ryhvs Apnofg Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Min format: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour The machine has been dismantled. At the time of disassembly, it was operational.

Year of construction: 2022, condition: excellent (used), Hello, I have a stationary drum screener STELMAR PBS 20.70 for sale. The machine was used for recycling. The screener is equipped with a frequency inverter that adjusts the rotation speed and is easy to operate. The screener's specifications can be found in the photo in the gallery. We can assist with disassembly and arranging a crane, as the machine is positioned at a height of 4.2m. More photos and information are available upon telephone contact. Hfsdpfoygurgjx Apneg

Condition: refurbished (used), For sale is a servo-hydraulic mold carrier, completely overhauled by Optitek. Technical data: Current state-of-the-art: after full overhaul in 2026 Closing force: 600 kN Stripping force: 300 kN Hydraulic operating pressure: max. 250 bar Clamping area: 2,000 x 1,000 mm Parallel stroke: 750 mm Opening width: 1,350 mm Upper platen tilt: 45° Lower platen tilt: 30° Total permissible tool weight: max. 100 kN Max. upper tool weight: 50 kN Travel speed: 160 mm/s Machine dimensions (L x W x H): 3,000 x 1,600 x 3,400 mm Machine weight: 8 tons Electrical connected load: 45 kW Operator side: one-sided Tank volume: 800 liters The following services have already been performed as part of the mechanical overhaul: · Disassembly of the mold carrier · Sandblasting of the mold carrier · Inspection of weld seams and restoration to proper condition if necessary · Cleaning, priming, and painting of individual mold carrier components: - Frame: RAL7035 (light grey) - Press ram: RAL3000 (flame red) · Replacement of all bearings and bushings · Refurbishment and resealing of drive cylinders Hfjdpfxjy Ax Ifj Apnog · Assembly of the mold carrier

Condition: new, functionality: fully functional, Year of construction: 2026, Loading, unloading, loading dock, access, mobile ramp 10T ramp, 2M width TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 2000 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Ramp Grating: Galvanized grating with anti-slip grooves. Provides a secure and safe surface. Forklifts and pedestrian traffic have the best possible grip and support. The grating has thickened galvanization and can be disassembled. ✅ Forklift Handle - installable on both sides: Convenient and quick attachment for forklift transport allows the ramp to be moved in all directions. Specially designed handle allows maneuvering even in limited space. ✅ Chain for connection to a TIR truck, wagon, or fixed warehouse ramp: Solid steel chain is another advantage of our ramp, additionally secured to prevent ramp movement during loading operations. Hjdopk Auqspfx Apnofg ✅ Sturdy side barriers: Protective barrier with the option to remove and install a frame/roof (roofing is optional). ✅ Electric height control for the ramp: Smooth electro-hydraulic drive uses a high-quality pump. The pump requires 230V so it can be operated from a standard socket. ✅ Dual-sided Manual Pump: Hydraulic pump for height adjustment in case of no access to electro-hydraulic power - dual lifting. This is an excellent solution for working in any conditions. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: new, Year of construction: 2026, functionality: fully functional, Loading, unloading, loading dock, access, mobile ramp 25T ramp, 2.5M width TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: Manufacturer: TM-GROUP Maximum load capacity: 25 tons Internal ramp width: 2500 cm Ramp barriers on both sides Ramp rollers for easy movement Central handle for moving the ramp with a forklift Hfodpfxjrp Ekfe Apnjg Angle and flap height adjustment Lubricated moving parts Equipped with a winch Custom ramp dimensions available for an additional fee Height adjustment with motor (optional) ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Ramp grating - galvanized grating with anti-slip grooves: Secure and safe surface. Forklift and pedestrian traffic have the best possible grip and support. The grating has thickened galvanization with the option of disassembly. ✅ Forklift handle - installable on both sides: Convenient and quick attachment for forklift transport allows the ramp to be moved in all directions. Specially designed handle allows maneuvering even in limited space. ✅ Chain for connection to a TIR truck, wagon, or fixed warehouse ramp: Solid steel chain is another advantage of our ramp, additionally secured to prevent ramp movement during loading operations. ✅ Solid side barriers: Protective barrier with the option to remove and install a frame/roof (roofing is optional). ✅ Electric height control for the ramp: Smooth electro-hydraulic drive uses a high-quality pump. The pump requires 230V so it can be operated from a standard socket. ✅ Dual-sided manual pump: Hydraulic pump for height adjustment in case of no access to electro-hydraulic power - dual lifting. This is an excellent solution for working in any conditions. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: new, functionality: fully functional, Year of construction: 2026, Loading, unloading, loading dock, access, mobile ramp 15T ramp, 2,5M width TM-GROUP ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 15 tons - Internal ramp width: 2500 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! Hjdpfjmt D Rwex Apnefg ✅ Ramp Grating: - Galvanized grating with anti-slip grooves. Provides a secure and safe surface. The forklifts and pedestrian traffic have the best possible grip and support. The grating has thickened galvanization and can be disassembled. ✅ Handle for a forklift (can be installed on both sides): - Convenient and quick attachment for a forklift allows the ramp to be transported in all directions. The specially designed handle allows you to maneuver the ramp even in confined spaces. ✅ Additional adjustable or fixed safety supports: - Work safety is essential, the ramp is equipped with a support system known from truck semi-trailers. Solid legs guarantee a stable base under the transported load. ✅ Chain to connect to a truck, wagon or fixed storage ramp: - A solid steel chain is another advantage of our ramp, additionally the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side rails: - Safety barrier with the possibility of unscrewing and installing a frame/roof (the roof is optional) ✅ Electric control of ramp height: - The smooth electro-hydraulic drive uses a high-end 230V pump. ✅ Double sided hand pump: - Hydraulic pump for height adjustment when it is not possible to connect to the electro-hydraulic power supply - two-sided lifting. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld Hfodpfxjxm Skro Apnsg

Condition: good (used), Year of construction: 1999, Accordion roller conveyor / scissor roller conveyor, Gura, extended length 4.20m, mobile – used - : Price ex-location: €650 (net), disassembled, packed and loaded! Manufacturer: Gura Type: 1200 – 524 – 3SVX Year of manufacture: 1999 Length extended: approx. 4.20m Hodpfx Aey Aiyropnsfg Length retracted: approx. 1.30m Width: approx. 53cm Height (height-adjustable): currently approx. 80cm Roller length: approx. 11cm Mobile on castors The scissor conveyor is extendable, suitable for curves, and its length is variable. Condition: good Availability: immediately Location: Storage site, Frankenberg, Saxony The scissor conveyor is extendable, can be steered through curves, and is variably adjustable in length.

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality by a TRUMPF technician at our facility. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam-on hours: 17,731 Laser Metal Fusion Machine (Metal 3D Printer) Flexible solution for industrial additive manufacturing. The TruPrint 3000 is a universal mid-format machine (LMF / PBF / LPBF) with industrial-grade part and powder management. From now on, you benefit from even greater flexibility, quality, and productivity for your additive serial production: Productivity is nearly doubled, independent of part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-laser system during the build job ensures optimal quality for printed multi-laser parts. The latest advancements in shielding gas guidance further improve part quality and reproducibility. This is documented in parallel with the build job via Melt Pool Monitoring, allowing compliance with requirements such as those in the medical sector. Highly flexible, the TruPrint 3000 can be adapted to your specific requirements. With a build volume of 300 mm diameter and 400 mm height, it can be used across a wide variety of industries. Depending on the size and complexity of the parts, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking—all under inert gas. External unpacking further minimizes the 3D printer’s downtime via simultaneous main-time operations. Technical specifications: TruPrint 3000 Build volume (cylinder): 300 mm diameter x 400 mm height Processable materials: Weldable metals in powder form, such as stainless steels, tool steels, aluminum, nickel-base, cobalt-chrome, copper, titanium or precious metal alloys. Current materials and parameter availability on request. Preheating (standard): up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser): 500 W Laser spot diameter: 100 - 500 μm Layer thickness (adjustable): 20 - 150 μm Scan speed (powder bed): 3 m/s Build rate: 5 - 60 cm³/h Connections and consumption: Electrical connection (voltage): 400/460 V Hfedpfx Asvvl I Topnjg Electrical connection (current): 32 A Electrical connection (frequency): 50/60 Hz Shielding gas: Nitrogen, Argon Design: Dimensions (incl. filter) (W x H x D): 3385 mm x 1435 mm x 2225 mm Weight (incl. powder): 4300 kg The system has been dismantled by the manufacturer, with disassembly records and function logs available. All axes are professionally secured. The system has been used with materials 1.44.04 and most recently with AlSi10Mg. Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data and listed specifications reserved!) We will be happy to answer additional questions by phone.

Condition: used, In this offer you purchase a used inkjet printing system "Canon VarioPrint i300" Object of sale: 1 x Canon VarioPrint i300 with the following equipment: The exact equipment can be found in the attached PDF document. Meter readings: Total: Approx. 166,100,000 Condition: The machine has been continuously serviced by Canon. Maintenance certificates available. A certified disassembly was carried out by Canon. The machine was restored to its delivery condition. A final test ran flawlessly. The machine was then dismantled by Canon specialists and packed in wooden crates, which were also originally used for delivery by Canon. The sales price does not include (seaworthy) packaging, which is available for a deposit. The machine is our property and is NOT a brokerage transaction. This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Hjdpjtw Sk Usfx Apnsfg The device has been tested for function. Test printouts are shown. Packaging and dispatch: An inspection of the machine in Belgium is possible by arrangement. The machine is already packed in the original delivery boxes. Worldwide shipping possible on request! A deposit of €15,000 is charged for the packaging. This fee will be refunded upon return. For further information you can of course contact us personally.

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 106196, planing height: 200 mm, spindle diameter: 90 mm, planing width: 300 mm, spindle speed (max.): 8,000 rpm, height adjustment type: electric, compressed air connection: 8 bar, number of spindles: 5, For sale is a planing line by Weinig, complete with associated mechanisation from Kallfass (before and after the planer). The planing line is currently no longer in daily production. The operator side (left) first spindle and its mounting are defective. Weinig Moulder: Weinig Powermat 2000XL (year 2006) with 5 spindles (Weinig Powerlock system) plus chamfering unit. "Set-up time savings!" Spindle arrangement: bottom, right, left, top, bottom. The bottom and top spindles are both equipped with a jointing device. Spindle motor ratings: bottom 23.5 kW / right 15 kW / left 15 kW / top 28.5 kW / bottom 28.5 kW. Spindle speed: 8,000 rpm. Hedeyzibmopfx Apnsfg The feed has a 15 kW drive motor, providing feeding speeds from 6 to 60 m/min. Compressed air requirement: nominal pressure 8 bar, operating pressure 6 bar. Workpiece dimensions for processing in the planing line: Shortest part: 2.00 m Longest part: 11.00 m (depending on mechanisation) Minimum thickness: 19 mm Maximum thickness: 200 mm Minimum width: 40 mm Maximum width: 300 mm Maximum profiling depth: 35 mm Feed rate: 6–60 m/min. Splitting is possible on the fifth lower spindle up to 60 mm height. Mechanisation: Kallfass "HmoK10000" year 2006 (operational/used) Before and after the planing line there is mechanisation by Kallfass. There is the option to buffer 2–3 packs before the unit, which must then be manually destacked before the infeed. Layer formation after the planer is performed by a paternoster unit with 3 adjustable walls. The maximum component length for this setup is 11.00 m. Price is quoted net ex works, without warranty. Complete disassembly is to be carried out by the buyer. A large inventory of cutterheads, spare parts, and various extraction components is available and can be purchased separately.

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, SOLD ROUNDO (Sweden) electro-hydraulic section bending machine Model: R-3 Capacity: 14 cm3 Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-7-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1,300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Includes: Brake motor Push-button control Digital read-out 1 extra set of rolls for pipe Ø 48 and Ø 42 mm Dutch-language manual Price of the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has seen very little use! Delivery conditions: Delivery time: ex stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe specializing in trading and stocking mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for our current stock list. We assemble and/or disassemble these systems in a safe manner with VCA-certified technicians, and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau Hfodpfx Ajxl Sq Aspnjg The Netherlands

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 450 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 12,400 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 130 mm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production—see the videos of the machine operating prior to disassembly! The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machining center, designed for precision manufacturing in industries where complex geometries and exact tolerances are crucial. Hodpeyq Emiefx Apnofg Included: - KNOLL FKA/500 band filter system + 3 filter rolls. - Filtermist FX5000 coolant mist extractor. - Renishaw OMP60 3D probe. - Chip conveyor - Spindle cooler - Original Mori Seiki tool holder block. - Original documentation + electrical diagrams. This Mori received a new spindle some time ago, which has only seen limited operating hours since. Report available!

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, working width: 1,450 mm, mount diameter: 800 mm, number of feed rollers: 2, section length (max.): 1,560 mm, The machine is equipped with 2 unwinding stations, allowing you to process double the quantity of cut lengths simultaneously. The machine speed is 50 m per minute. In the longitudinal direction, 3 knives can be set, enabling the width to be halved and a trim to be cut off on each side. The unwinding station is equipped with 3-inch and 6-inch pneumatic expanding shafts. We have successfully processed BO PET films with thicknesses ranging from 36 to 250 microns. The machine is fully connected, can be inspected daily, and, by arrangement, customer material can also be tested. We would disassemble and load the machine, either onto a truck or into a container. Hfsdpoy D Edcsfx Apnjg

Condition: excellent (used), functionality: fully functional, Roller conveyor with a length of 5 m, with the option to disassemble it into smaller elements for transport (possibility of cost-efficient shipping within the EU) Hodpfxey Sinhe Apnsfg

Condition: used, Year of construction: 2018, • Brand: FAGIMA FRESATRICI • Model: JAZZ L • Year of manufacture: 2018 • 5 axes • Fixed table dimensions: 1,250x800 mm, maximum load capacity: 1,000 kg • Rotary table dimensions: 600x600 mm, maximum load capacity: 500 kg • Total travels: 2,000x600x550 mm • Travels on fixed table: 1,250x600x550 mm • Travels on rotary table: 600x600x550 mm • Equipped with: scraping chip conveyor, workpiece measurement probe, through-spindle coolant system Hfsdpfxey I A Dbs Apnsg • The machine is not connected to power and is partially disassembled; therefore, it has not been possible to verify its correct operation. • Externally, it is in good general condition, with no damages or deformations detected.

Condition: used, Year of construction: 1994, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, quill stroke: 80 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, workpiece weight (max.): 6 kg, Tool holder: 40 Hodpfxsymc T Ee Apnjfg Magazine positions: 20 Machine weight: 3,200 kg Dimensions: Length: 2,740 mm Width: 2,660 mm Height: 2,140 mm Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and expert installation – all from one source. Billing according to individual terms and duration. Contact us for your personal offer.