Used Disc Sanding Machine for sale (90,259)

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. Gsdswgc D Sjpfx Abdsbg The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel Gjdevkgvhopfx Abdobg - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Condition: as good as new (ex-display), Year of construction: 1993, Belt width: 150 mm Belt length: 3000 mm Table size: Veneer sanding device: yes Oscillation: yes Tilting table: yes, 0°–45° Extraction connection: Gedpjwv Nbvefx Abdjbg Motor power: 3 kW Machine length: 2000 mm Machine width: 1200 mm Weight: 600 kg

Condition: good (used), Pipe cutting machine, pipe cutting saw, pipe cutter -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg Gbjdsv Tz N Iepfx Abdsg

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Godextxhkopfx Abdsbg Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: new, Year of construction: 2024, table length: 1,450 mm, table width: 500 mm, overall weight: 550 kg, input voltage: 400 V, oscillation stroke: 20 mm, input frequency: 50 Hz, OBS 150 ARCO edge sanding machine. NEW. Sanding height 150 Oscillation stroke 20 mm Machine length 1450 mm Front side of the processing side is curved Table spread (adjustable) Rear side for straight processing. Table tiltable up to 45 gr. Gbsdpfx Ajr Erhwsbdjg Motor power 2.5 kW, 2 speeds. Sanding speed 11.5 and 8 meters/sec. Central extraction Diam 140 mm. Pneumatic tensioning of sanding belt. The machine is very suitable for staircase manufacturers.

Condition: used, functionality: fully functional, machine/vehicle number: 951909, Wall arm grinding machine for processing natural and artificial stone Gjdpsxqh Inefx Abdsbg Speed regulation Motorized height adjustment Granite grinding head Marble grinding head Various mounting plates for segments shape Frankfurt and S2K

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: Gbodpfx Asw Av Ivjbdeg 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: new, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder (factory installation – price: €672.00 net, not included in price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 – 2000 rpm Longitudinal feeds: (27) 0.06 – 2.78 mm/rev Cross feeds: (22) 0.01 – 0.72 mm/rev Metric threads: (36) 0.8 – 14 mm Inch threads: (30) 2 – 28 TPI Quill diameter: 45 mm Quill travel: 100 mm Quill taper: MT 4 Gedegd Iagepfx Abdebg Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Approx. weight: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, DIN 55029 compliant • Fixed steady rest – max. through diameter 90 mm • Travelling steady rest – max. through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Removable chip tray • 320 mm face plate • Four-way tool post • Guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine lamp • Reducer bush • Change gears • 2 live centres • Foot pedal with brake function, CE compliant • Motor with magnetic brake as per CE regulations / operating tool set Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder, factory installation (price: €672.00 net, not included in basic price)

Condition: used, Edge grinder, edge grinder, grinder -Grinding height: 75 mm -Grinding length: 390 mm Godjcmh H Ispfx Abdjbg -Dimensions: 780/300/H520 mm -Weight: 40 kg

Condition: ready for operation (used), Year of construction: 2008, Table size: 220 x 820 mm Table size (front table): 250 x 350 mm Gbjdev Efn Sspfx Abdeg Grinding wheel dimensions: 150 x 2260 mm Grinding belt speed: 16 m/s Drive motor: 400 V, 1.5 kW Weight: 164 kg Space required: 1200 x 600 x 1250 mm

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz Gjdpfx Aspgmufebdjbg weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected Gbsdpfjvnv Tqex Abdeg - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: excellent (used), Carousel sanding machine Intorex LTA 1300 Max working length: 1300 mm Gbjdpfx Aoirt Ivsbdsg Max sanding diameter: 160 mm Spindle motor power: 3 HP Total power: 3,2 kW Output up to: 960 pcs / hour Net weight: 75 kg Gross weight: 1200 kg Dimensions: 2,5 x 1,2 x 1,6 m Sander for turned pieces with a drum with 6 spindles and a adjustable rotating speed between 0,5 and 5,5 rpm. The working system operates through a rotating drum and 5 lines of oscillating brushes equipped with grooved sanding belts of different grades. Centering, holding and ejection is effected on automatic cycle by a cam installed in the drum.

Condition: new, Bernardo edge sanding machine KSM 3000 C with veneer sanding device Technical specifications working table 960 x 350 mm table height adjustment 210 mm belt length 3000 mm belt width 150 mm sanding belt back 1060 x 200 mm sanding unit swivelling 90° - 45° belt speed 20 m/sec. additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0,25 kW (0,34 PS) suction connection Ø 120 mm Motor output power S1 100% 3,0 kW (4,0 PS) Motor input power S6 40% 4,5 kW (6,0 PS) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding device additional table Graphite coating Mitre fence Sanding shoe Suction hose Features - Heavy machine stand in torsion- and vibration-free construction, extremely stable - Grooved infeed fence, ideal for sanding veneer overhangs - Suction connection 80 / 100 mm on both sides for optimum chip removal - Oscillating sanding belt ensures high stock removal and a clean sanding pattern - Maintenance-free sanding belt oscillation with separate gear motor, optionally switchable - Height-adjustable sanding table for utilisation of the entire sanding belt - Standard veneer edge sanding device with fine adjustment - Quick changeover from veneer to solid wood sanding possible - Height adjustment of the working table or swivelling of the sanding unit via handwheels Gbeded N Tdmjpfx Abdeg - spring

Year of construction: 1987, condition: good (used), machine/vehicle number: 17/4, usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table can be tilted down/up to: 45/30° Table height above floor: 950 mm Gbodpfx Asit N Ipebdeg Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND Gsdopgmtzepfx Abdebg Belt dimensions: 2000 x 75 mm belt speed: 18/ 37 m/sec power: 2,2/ 2,8 kW 400V/50Hz weight: 90 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: new, Number of sanding units 2 St. sanding width 190 mm Sanding height max. 2-180 mm LÖWER double-sided grinding machine DSM 2000 ----- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Forced pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the sanding rollers Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom using a precision threaded spindle Dimension display via scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinders with constant clamping pressure - Sanding belt change with pneumatic belt relaxation in seconds - Adjustment of the sanding belt run when changing the belt - electro-pneumatic compressed air monitoring - Run-in protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and non-stick conveyor belts over heavy, 1000mm long cast tables with a finely planed surface and Spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - automatic workpiece thickness scanning (no previous measurement necessary) - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Grinding thickness: 2-180mm - two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11 and 16 m/min. - automatic height adjustment: 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle: 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height: 850mm - Length: 2105mm - Length with control panel 2490mm - Width: 880mm - Height: 1910mm - Weight: approx. 1500 kg - Operating voltage: 400 volts, 50 Hz, 3P - CE version ----- ----- Basic price of the machine on request! Gedpfevu Hdtox Abdjbg ----- ----- Special accessories with surcharge: continuous feed 4-20 m/min. for speed adjustment to the previous machine Price on request Workpiece blow-off - using nozzles from above and below at the machine ...

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine 6 sanding units, each 1.5 kW, max. working width 250 mm, Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Gedjdykwlspfx Abdsbg Weight in kg: approx. 3000, (Makor, Delle Vedove, Venjakob, Flader)

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Gbedpfx Aod Tb U Sjbdsg

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Gsdpfxewvt I Hj Abdobg Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Gjdpfx Abevnv Uhsdjbg Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: new, Bernardo Belt Grinding Machine KBR 100 x 2000 Duo belt dimension 100 x 2000 mm belt speed 15 / 30 m/sec. min./max. pipe diameter 20 - 76 mm slide adjustment 30° - 90 surface grinding table 400 x 100 mm contact wheel Ø x W 195 x 100 mm suction connection Ø 2 x 100 mm Speed 1410 / 2850 rpm Motor output power S1 100% 2.2 / 2.8 kW (400 V) Motor input power S6 40% 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H) 750 x 1450 x 1160 mm Weight approx. 158 kg Features Constant belt tension due to spring-loaded tensioning device Standard with cylindrical grinding device for pipes diam. 20 - 76 mm Quick and easy adjustment of the desired grinding angle Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Large dimensioned plane grinding surface with protective cover Slow belt speed (15 m/sec.) optimal for grinding of stainless steel and aluminium User-friendly belt change, fast and uncomplicated Quick and easy change of grinding rollers without tools Different grinding angles from 30° to 90° possible without any problems Shorter processing times compared to milling Scope of delivery Sanding belt K 36 Rubberized sanding roller Gedpfjd Id Ubex Abdjbg 1 pc. sanding roller for 3/4" tube (26/28 mm tube) 2 pcs. Hinged protective discs Cylindrical grinding device Grinding and support table 2 x dust extraction nozzles diam. 100 mm 2 pcs. chip collecting container Graphite coating Motor protection switch

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions Godst Tqy Eopfx Abdjbg drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Gbodpfxev D Rg Ds Abdog Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...