Used Toolholder Sk 40 for sale (24,621)

Condition: excellent (used), Collet chuck Collet chuck SK 40 DIN 69871 Tightening thread M 16 Collet type OZ-467 E length 140 mm Fsdpfx Aelwqc Ejggsgg 10 pieces with set 150 Euro Single delivery 15 Euro

Condition: excellent (used), For sale: a Getriebebau NORD gearmotor with a worm gear and a three-phase motor. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. This gearmotor is ideally suited for driving conveyors, feeders, industrial machinery, mixers, and other devices requiring high torque at low speeds. Technical data: Gear manufacturer: Getriebebau NORD Gear type: 1S50VZ.71 L/4 Gear ratio: i = 35.00 Output speed: 40 rpm Fsdpsznk U Esfx Aggsgg Motor manufacturer: NORD Motor type: SK 71L/4 Power: 0.37 kW Supply voltage: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Motor speed: 1360 rpm (50 Hz) 1630 rpm (60 Hz) Protection class: IP55 Insulation class: F Operating mode: S1

Condition: as good as new (ex-display), Collet chuck SK 40, DIN 69871/OZ32 Collet type OZ32 467 E Overall length 190 mm The parts are unused in the original, unopened packaging Price per piece Fgodpfx Aslrt S Nsggjg 12 pieces available Weight per piece 2 kg

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Fgodpfx Agexf Ur Nsgjg

Condition: good (used), functionality: fully functional, tool type: SK 40, SK40 cutting wheel holder 4 pieces of tool holders / cutting wheel holders / backing wheel holders for cutting wheels / backing wheels / backing blades in size SK 40, suitable for the tool changing device / tool holding device in good used condition 1 x Ø 31.75 x 120 for disc cutting wheel 1 x Ø 44.45 x 84.5 for disc cutting wheel / bell cutting wheel 1 x Ø 44.45 x 84.5 for disc cutting wheel / bell cutting wheel, special holder with centric mounting bore Ø9.9 for additional tool clamping device Fgodpfx Agjikvwqogog 1 x MK2 for shank cutting wheel Price negotiable Our asking price is €1,190 for the set, net, ex works, plus packaging costs. matching Lorenz clamping fixture for SK 40 tools All technical specifications are subject to typographical errors and errors. We only sell to countries within the European Community.

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: SK 4282A-G-100 L/40 i = 43.65 -Speed: 33 rpm -Engine: Type SK 100 L/40 -Power: 3 kW / 1410 rpm -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 530/260/H465 mm -Weight: 85 kg Fgodpot E D N Djfx Aggeg

Condition: used, Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: WMW Smalcalda, milling chuck SK40 5 pieces -Type: SK 40/B12 40908 3 pieces -Type: SK 40/B18 41076 2 pieces -Versions: see photos -Price/Delivery: complete Fedpfoubfxkox Aggegg -Transport dimensions: 340/180/H70 mm -Total weight: 6.6 kg

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor Fgsdjt Drldepfx Aggog -Manufacturer: Nord, gear motor -Type: SK 30-100L/40 i= 4.29 -Speed: 326 rpm -Engine: 3 kW / 1400 rpm -Shaft: Ø 40 x 80 mm -Dimensions: 550/260/H310mm -Weight: 45kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Nord, geared motor -Transmission: Type SK 3282AZ-100L/40 i= 23.71 -Speed: 60 rpm -Engine: Type SK 100L/40 -Power: 3.0 kW / 1410 rpm -Protection rating: IP55 -Shaft: Ø 40 x 170 mm Fgsdpfxet E D D Uj Aggsg -Number: 2x motors available -Price: per piece -Dimensions: 500/250/H370 mm -Weight: 66 kg/unit

Condition: good (used), Tool holder for SK 40 chucks -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant Fgedpfxodm Supj Aggjg -resistant to: mineral oil and various chemicals -Price: complete

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor Fodpfjt E D Hvex Aggogg -Manufacturer: Nord, gear motor -Type: 1SU63A-80 L/4 i = 18.50 -Speed: 76 rpm -Engine: Nord Type SK 132 M/40 -Power: 9.2 kW / 1450 rpm -Voltage: 400/690 V -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 620/320/H465 mm -Weight: 125 kg

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete -Overall dimensions: 500/300/H170 mm Fjdpfxspix Nks Aggjgg -Weight: 34.4 kg

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Fgedpfszdvcajx Aggog Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: like new (used), NOFIX quick-change tool holder for retrofitting to milling machines, boring machines, etc. For ISO / SK 40 spindle mounts Fjdpfsv Saaiox Aggsgg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Tul-Kelch tool rack SK 40 Tool holder SK 40 48 slots for SK 40 tools Width 900 mm Depth 450 mm Height 1090 mm Fedpfx Agjy I T S Nogegg

Condition: new, Year of construction: 2026, GMN TS120x400-61913, spindle, SK 40 New Fjdpfx Agjzbrlgegogg

Condition: new, NEW & unused Overview / list of available types (see pictures) Fedpfsp T N Tqsx Aggjgg multiple units available Price: per piece

Condition: used, Technical details: Fgjdju Nkzpjpfx Aggjg Number of drawer: 2 taper: SK40 weight: 362 kg dimensions L x W x H: 0,42 x 0,69 x 0,51 m Very well maintained tool trolley made of pipe construction, screwed with tools (comparable with the pictures) *

Condition: used, Universal boring head STANKO Spindle tool, spindle head Fgedpfsxciv Dox Aggjg Tool holder: SK 40 - M16 Adjustment bushing holder: Ø 36 mm Adjustment range: 17.5 mm Adjustment accuracy: 0.01 mm Tool shank: Ø 18/22 mm Machining diameter: approx. 10-45 mm - Adapter SK40 to adjustment bushing Ø 36 mm - Boring head with adjustment bushing shank Ø 36 mm Net weight: 5 kg Very good condition

Condition: used, 50 pieces Fjdpfx Aey Ulx Ujggsgg used SK 40 holders

Condition: good (used), Milling chucks, SK 40: Weldon collets, 6 - 25 mm, and collet chucks, 3 - 25 mm. Please inquire if interested! Fgsdpsha Uhzefx Aggjg

Condition: used, DIN 2080 and DIN 69871 Weldon holder cylindric holder with keyway MK holder MK holder with tightening screw Kaiser holder Muti Bore Fjdpfxjdrr Tvo Aggsgg Collet chuck ER Collet chuck OZ Drill chuck Multi purpose attachment bolts Screw quick-action chucks Blanks

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional Fgsdpfxoxizb Eo Aggeg ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Year of construction: 1991, operating hours: 19,888 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1.844, MACHINE DETAILS Control system: CNC Fgedpfxozxcl Rj Aggog Operating hours: 19,888 h

Condition: used, Year of construction: 2017, overall weight: 140 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Fodpjzz Axcsfx Aggegg