Used Dispenser for sale (447)

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) Ffodpfx Aaoibx S No Esw St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter Ffodpfx Aen D Hczoa Esw -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

Condition: excellent (used), COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker Ffedpon D E Hpjfx Aa Esw - Labeling unit - Stapler

Condition: good (used), Winterhalter GS 502 Basket Pass-Through Dishwasher The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. You benefit from a comprehensive hygiene concept with a deep-drawn tank, surface heating elements, and a sieve system. Thanks to its powerful cleaning action, Winterhalter guarantees hygienically clean results, even with heavy soiling. The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. You benefit from a consistent hygiene concept with a deep-drawn tank, surface heating elements, and a sieve system. Thanks to its powerful cleaning action, Winterhalter guarantees hygienically clean washing results, even with heavily soiled items. Fsdpfoxuq Aisx Aa Ejfw The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. Technical Data: Theoretical output: 60 baskets per hour Dimensions (width x depth x height): 635 x 749 x 1469 (hood open 1932) mm Infeed height: 420 ± 5 mm Working height: 850 mm Basket dimensions: 500 x 500 mm Tank capacity: 42 l Rinse water consumption per cycle: 2.4 l Tank temperature: 60°C Boiler temperature: 85°C Required water pressure: 1 bar Total connected load with hot water connection > 40°C: 9.5 kW Total connected load with hot water connection < 40°C: 15.5 kW Standard features of the Winterhalter GS 502: One-button operation with color coding Integrated rinse aid dispenser (including suction lance) Built-in special detergent dispenser Covered heating element Drain pump Hygiene features: 4-stage lye filtration (filter cassette, pump filter, surface filter, Mediamat), self-cleaning program. The boiler has a thermal cut-out to ensure the required rinse temperature. Program starts by closing the cover Double-walled cover Display panels (e.g., for dosage, water treatment, etc.) Spray water protection IPX5 Connection cable 400V3N ~, 50 Hz Inlet and outlet hoses Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 1990, pressure 63 t stroke 250 mm throat 280 mm dayligth 400 mm table surface area 650 x 520 mm table height over floor 830 mm ram surface 500 x 390 mm feed down 100 mm/s feed up 465 mm/s working feed 25 mm/s oil volume 650 l Fsdpfx Aasylzzfo Esfw power requirement 24,0 kW Weight 4,8 t dimensions of the machine ca. 1,5 x 1,9 x 3,4 mxmxm SPECIAL DEAL as is where is - as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t Ffodsylzw Hspfx Aa Eew dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1977, pressure 100 t throat 350 mm stroke 6 - 100 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 850 x 700 mm hole in the table 470 x 150 mm table height over floor 855 mm ram surface 450 x 300 mm Ffodpfjylzwyjx Aa Esw ram adjustment 80 mm power requirement 7,5 kW weight 5,0 t dimensions (WxDxH) 1,5 x 2,3 x 2,6 m SPECIAL DEAL as is where is, WITHOUT putting into operation as spare part dispenser, free loaded to truck

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Model - RFE 300. Serial Number - 24-810. Ffedpfx Ajydlg Aoa Eew Date of manufacture - 2024. Freon gas - R404A. Control unit: 1 x ROKK Processing Ltd SP40BC Control Unit. Serial Number - 92152600300. • Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pipes for connection to pasteuriser included Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Condition: excellent (used), functionality: fully functional, Whipped Cream Machine Mussana Whipped Cream Dispenser Tabletop unit with cooling Stainless steel construction For approx. 3–5 liters of raw cream With portioning device Connection 220V, ready to plug in Used equipment, cleaned Options: Delivery service Maintenance contract Service package Many more bakery machines in stock! Fsdot U Uv Hepfx Aa Eefw

Condition: used, mileage: 166,301 km, power: 110 kW (149.56 HP), first registration: 02/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,800 mm, loading space width: 2,110 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), 3-seater, power steering, 6-speed manual transmission, tachometer, power steering, electric windows, onboard computer, air conditioning, electric exterior mirrors, center armrest, LED side marker lights, new trailer hitch, new air suspension, LED light bar, water dispenser, toolboxes left/right, electric winch, work lights, side guards, twin tires, wheelbase: 3,750 mm etc. Errors, prior sale, and typographical mistakes reserved. Fsdpfxoxq Sl Do Aa Eofw Sale only to commercial customers and for export. !!!! Fg-8376 !!!! Key number 123 !!!!! Test/inspection drive to Iveco, TÜV or Dekra possible !!!!! New TÜV available on request !!!!!

Condition: used, Year of construction: 1986, Manufacturer: DumekModel: ED100Year: 1986Type: Volumetric dosing machinePressure and dispensing time controlOperating mode: semi-automatic/automaticStainless steel hopper with double jacket: 15 L   Ffsdpfxoygx S Ro Aa Eew  

Condition: used, Year of construction: 1984, material width 250 mm Ffodpfoylcmpex Aa Esw material thickness 0,25 - 3,0 mm no. of straightening rolls 11 straightening roll diameter 30 mm speed 6 - 60 m/min power requirement 15,0 kW weight 1,1 t dimensions (WxDxH) 1,1 x 1,7 x 1,5 m SPECIAL DEAL as is where is, as spare part dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, pressure at min. stroke 3 t throat 150 mm stroke - 39 mm distance table/ram, max. stroke up, adjustment up 200 mm table surface area 280 x 380 mm pressure at min. stroke 1,5 t no. of strokes with min. stroke - 80 /min no. of strokes with max. stroke - 50 /min hole in the table 45 mm table height over floor 790 mm Fsdpfxjylcmio Aa Eefw ram surface 115 x 100 mm Required air-pressure 4 bar weight 0,2 t Dimensions (WxDxH) 0,5 x 0,9 x 1,4 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work as spare part dispenser, free loaded to truck pneumatic knuckle-joint press

Condition: used, pressure 5 t throat 150 mm stroke 40 mm no. of strokes 0 - 80 /min distance table/ram, max. stroke up, adjustment up 260 mm table surface area 340 x 270 mm hole in the table 45 mm table height over floor 780 mm table adjustable 120 mm ram surface 60 mm weight 0,3 t dimensions (WxDxH) 0,4 x 0,8 x 1,4 m Ffjdpfeylcmcjx Aa Eow SPECIAL DEAL as is where is, WITHOUT putting into operation / WITHOUT additional work as spare part dispenser, free loaded to truck pneumatic knuckle-joint press

Condition: used, Year of construction: 1966, pressure 063 t throat 450 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 720 x 800 mm hole in the table 280/250 mm Fedoylckzspfx Aa Ejfw table height over floor 800 mm passage to the back 290 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,7 t dimensions (WxDxH) 1,3 x 2,0 x 2,65 m SPECIAL DEAL as is where is, WITHOUT putting into operation / WITHOUT additional work, partly dismantled as spare part dispenser, free loaded to truck

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm Fsdeylcknepfx Aa Eofw ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm SPECIAL DEAL as is where is, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 2019, Manufacturer : Novexx Solutions Model TE 204 Year : 2019 Type : Tamper-evident labeller Fsdpfx Aoygndioa Eefw Type of products handled : Carton   Labelling head : ALS204 Dispensing speed : max. 40 m/min Label width: 10 -110 mm Label length: 5 to 600 mm   Supply voltage: 220V Motor power: 2.5 kW Technical documentation Dimensions : 2363 x 1455 x 1420 mm  

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Ffedpfx Aeya Hvqsa Esw Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: used, Additional title: Brewing vessels with copper hoods and hop dispenser, whirlpool and wort cooling Fodpfx Aovcqufsa Eofw Capacity: 150 hl/brew Operation / Control: ProLeit / Siemens S7 Material: brew house vessels copper-covered Features: mash/wort kettle, mash/lauter tun, hop addition, vapor condenser system, whirlpool, wort cooler, various pumps and fittings

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Filling valve diameter: Ø12mm Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery directives CE compliant Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation Force shunt free current transfer at the load cell Front protection to reduce interference on the weighing result Stainless steel control cabinet Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution Flexible operability due to tiltable stainless steel operator terminal Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III Tandem design Max. Label height: 120mm  Photocell for label scanning 2 x automatic winding station incl. counter pressure plate Mounting device with height adjustment for lateral label dispensers With adjustable side guides - passage width up to 150mm Ffjdpfxemfqm Ds Aa Esw

Condition: used, Year of construction: 2007, Overview This automatic stretch wrapping machine was manufactured in 2007 by Robopac (Italy). The model Genesis is a high-performance rotary ring pallet wrapper designed for securing palletized loads using stretch film. It was previously part of a complete PET bottling line and has been dismantled and stored in our warehouse. The system includes a top-sheet dispenser and pallet hold-down device and is immediately available. Technical data  Capacity: up to 88 pallets/hour Film type: Standard stretch film, 23 μm, inside cling Film width: 500 mm Maximum pallet height (including pallet): 2,000 mm Maximum pallet weight: 1,000 kg Room height required: 7,000 mm Conveyor height: 550 mm Pallet movement direction: Longitudinal Control system: Siemens S7 PLC Configuration: Rotary ring system with top-sheet applicator and hold-down device Condition: Dismantled, stored indoors, in good working condition Fedoxnm I Uspfx Aa Eefw

Condition: used, Year of construction: 2012, Overview This labeling machine, type: Novexx Solutions ALS 206 was built in 2012 and ws used for carton-labeling. With this solution, labels with a width of from 10 – 156 mm (material width incl. carrier material max. 160 mm) on the side of products become. The surface of the product must be flat in order to ensure uniform label application. It Paper and rigid PE label materials can be used become. The maximum dispensing speed is 30 m/min. The tripod with the vertical and horizontal Adjustable spindle allows flexible integration into a Assembly line system. The product sensor must be connected to the M12 connector of the ALS. Top labeler and bottom labeler printing unit with infeed and outfeed belt. Upper unit model ALS 206, subunit ALX 924/5. Can be supplied with computer and label machine for cardboard labels. Incl. tripod. The subway labeller was new 2 years ago. It is an overhoult device. Technical Details Dispensing speed: Up to 30 m/min Material width incl. material carrier: 10 - 160 mm Label length: 5 - 600 mm Label roll diameter: up to 300 mm Data interfaces: RS 232C, Ethernet, USB Scope of delivery Top labeler | Novexx Solutions | ALS 206 | 2012 Bottom labeler | Novexx Solutions | ALX 924/5 | 2022 Fsdpfx Aasvrfh Ej Esfw

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling unit (glycol) | 2019 2x 28kW Glycol tank Hot water tank 6x Fermentation tanks | 2760l | 2019 3 bar, insulated with jacket cooling, CIP capable 12x Storage tank | 2760l | 2019 3 bar, no cooling, were in a separate cold room Reverse osmosis Compressor | JAN | 585l/ min | 2020 KEG filling 1x drum washer with automatic caustic refill and steam-heated 1x keg filler Up to 70 barrels/ h, Fitting: Type S, basket fitting, Siemens S7 Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc. Ffsdpfx Asyb N N Asa Eow

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Fedpfxjl Hx Rde Aa Ejfw

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale Fsdpfxjwy U Nmo Aa Eofw PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.