Used Doosan Dx 140 Lc for sale (280)

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Hedpfx Absxwytcegsp Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant Hedox Dk Dlspfx Abgsp

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Hsdpfxjxm Sxvo Abgjp Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Hodpfxewwtrbs Abgop

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MV0009-001573, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 33 kVA, overall weight: 5,000 kg, type of input current: three-phase, Doosan DNM 400 – Vertical Machining Center. CNC milling machine for precise metalworking. Suitable for drilling, milling, and tapping operations. Reliable and accurate, ideal for industrial use. Hjdpfx Ajy Exg Hobgjp

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers = More information = Hjdox Scplspfx Abgop Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Year of construction: 2021, condition: ready for operation (used), - USED - 8-AXIS TWIN-SPINDLE CNC LATHE WITH DOUBLE TURRET HEAD MAX ROTATING DIAMETER: 230 mm MAX TURNING LENGTH: 230x2 mm MAX TURNING DIAMETER: 230 - 230 mm BAR CAPACITY: 81 mm SPINDLE: 3500 rpm; 18,5-22 kW; 244 Nm; ASA A2-8 COUNTER SPINDLE: 5000 rpm; 15-18,5 kW; 223 Nm; ASA A2-6 X1-AXIS TRAVEL: 165 mm X2-AXIS TRAVEL: 165 mm Y1-AXIS TRAVEL: ±50 mm Y2-AXIS TRAVEL: ±50 mm Z1-AXIS TRAVEL: 700 mm Z2-AXIS TRAVEL: 700 mm B-AXIS TRAVEL: 730 mm RAPID FEEDS X-Y-Z: 30 - 15 - 40 m/min DRIVEN TURRET HEAD: BMT55P ; 24 + 24 POS; 5000 rpm; 7,5 kW Hedpfx Aszbnrpsbgjp HIGH PRESSURE COOLANT: 35 Bar CONTROL UNIT: DOOSAN FANUC i-series WEIGHT: 9600 Kg OVERALL DIMENSIONS: 3880 x 2360 x 2250 mm ACCESSORIES: PARTS CATCHER ; SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER ; LINEAR SCALES

Condition: used, Year of construction: 2013, operating hours: 2,990 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,540 mm, gearing type: automatic, Equipment: cabin, head guard, Doosan G30G. Forklift with a load capacity of 3,000 kg and 2 doors. Unladen weight: 4,600 kg. Lifting height: approx. 4 m. Tow hitch, heater, 2 sliding windows, turn signals, work lights, fork length approx. 1 m, windshield wiper, power steering, suspension seat, reversing alarm, 4-cylinder engine. Daily purchase of commercial vehicles, trade-ins also possible. Price: €6,900. Hedpfx Aey S Ng Dobgop

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,350 h, load capacity: 3,500 kg, lifting height: 4,350 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: head guard, lighting, pallet forks, sideshift, Doosan forklift D35C-7 year of manufacture 2018 2350 operating hours Hsdpfx Aey Af Eqobgsp triplex mast / sideshift and 4th valve

Condition: excellent (used), FANUC 21-M Control With NC dividing head Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Hedpfx Absy Hqyhsgep Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Coolant through spindle Misc. accessories MARCELS MASCHINEN CH

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 6,540 h, Empty weight: 14.400 kg Hjdjy Takijpfx Abgep Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Year of construction: 2008, condition: used, New: No VAT/margin: VAT qualifying Hsdpfjy Alt Ujx Abgjp

Condition: excellent (used), DOOSAN VC 630/5AX YEAR 2015 CNC HEIDENHAIN 530 AXIS TRAVEL: -X: 650 mm -Y: 765 mm -Z: 520 mm -A: 150 (+30 -120º) – (0.001º) -C: 360º (0.001º) TABLE: -5 Continuous axes -⌀ 630 mm -Distance from spindle to table: 210-730 mm -Max. permissible weight: 500 kg RAPID TRAVERSE: -X: 40 m/min -Y: 40 m/min -Z: 36 m/min -A: 20º/min -C: 30º/min BALL SCREWS: ⌀ 45 X 16 (X, Y), ⌀ 45 X 12 (Z) mm ELECTRIC SPINDLE HEAD ISO 40 DIN69871 (*Brand new) -Motor power (continuous - 30 min): 24/32 Kw -RPM: 20,000 INCLUDED OPTIONS: -Optical scales on all axes -120-tool changer -Automatic pallet changer with 5 pallets -Renishaw measuring probe Hedpfxezc Hm Uo Abgjp -Laser pre-measuring device -Chip extractor CONDITION: Machine in excellent condition. Headstock is completely new. Available for inspection in operation.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,437 h, load capacity: 3,000 kg, lifting height: 5,560 mm, free lift: 1,650 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, power: 343 kW (466.35 HP), motor manufacturer: Doosan, fork carriage width: 1,040 mm, fork length: 1,200 mm, fork width: 100 mm, fork thickness: 45 mm, turning radius (inner): 1,900 mm, turning radius (outer): 2,450 mm, tire condition: 40 %, front tire size: 28x9–15, rear tire size: 6.50–10, overall weight: 4,175 kg, Equipment: CE marking, front guard, full service history, head guard, lighting, pallet forks, === KEY SPECIFICATIONS === Year of manufacture: 2017 Hours: 2437 h Maximum lifting capacity: 3000 kg Maximum lifting height: 5560 mm Mast type: Triplex (FFT) Fork length: 1200 mm Side shift: No Drive: Diesel Transmission: Automatic Cabin: Enclosed cabin Heated cabin: No Hedpfx Aexzgydebgjp Tyres: Pneumatic tyres Stabilizers: No Engine manufacturer: Doosan Emission class: Stage IIIA Weight: 4175 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and complete documentation included Ready for immediate transport and use Comprehensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced, and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price €13,875 (EXW, excl. VAT) Reliable machines from first owner with full maintenance history and professional technical support. Benefit from one of the largest European stocks of new and used equipment. All machines are fully inspected, CE-approved, and ready for immediate operation. Spare parts and expert assistance available upon request. === SHIPPING === Crane loading available on request for smooth handling during dispatch. Flexible shipping options tailored to your destination and logistics requirements. All transports professionally arranged by the Collé Rental & Sales logistics team.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Hsdpozd Sk Hsfx Abgep Delivery: EXW Székesfehérvár, Hungary. An optional 16 m3 bucket is available at an additional cost.

Condition: good (used), Year of construction: 2013, Excellent horizontal machining center with Fastems automation system for 10 pallets. Built in 2012, first used in 2013. Including: Automatic pallet changer Internal cooling Renishaw tool sensor Chip evacuation Through-spindle cooling (IKZ) Machine can be seen in operation upon appointment. Immediately available for delivery. More info and videos available on request. Control Fanuc 31i X-axis 850 mm Y-axis 700 mm Z-axis 750 mm B-axis (rotation) 360° Table 500x500 mm Spindle Maximum 14,000 rpm Spindle taper SK40 Number of tools 2 x 60 positions Spindle hours ca 12000h Hedsypb Srjpfx Abgjp Machine weight approx. 16 tons Floor space required approx. 9000 × 9000 × 2850 mm (including FMS) Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2009, CNC lathe, 2 axes, DOOSAN LYNX 220LB, year of manufacture 2009 Fanuc i series control Chuck diameter: 210mm Spindle bore: 51mm Max. turning length: 525mm Hjdpfx Abozai Rwogsp Max. turning diameter: 320mm 12-position tool turret Tool probe Tailstock Part catcher Included with the machine: - Documentation - Chip conveyor with pump - Toolholders located on the turret

Condition: used, Year of construction: 2003, WORKING CAPACITY SWING OVER BED: 1,000 mm MAX TURNING DIAMETER: 850 mm MAX TURNING LENGTH: 850 mm SPINDLE CENTER HEIGHT: 1,200 mm MAIN SPINDLE Hodpeqgf Ayefx Abgep SPINDLE NOSE: ASA A2-11 BAR CAPACITY: 110 mm SPINDLE SPEED RANGES: 2 SPINDLE SPEED: 5-1,800 RPM AXIS FEEDS X-AXIS TRAVEL: 470 mm Z-AXIS TRAVEL: 850 mm RAPID TRAVERSE: 20 m/min FANUC SERIES 21i-TB

Condition: used, Year of construction: 2018, x-travel 1300 mm y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg Hodpfxsy Aphco Abgep

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price.. Hodpfx Absyugvaegop

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning * Radio * Central lubrication system * Work lights * Loading bucket * Load disconnect ----Subject to errors and prior sale Hjdey Daf Iopfx Abgep ----Vehicle number: 11891

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm Hjdozak Dxopfx Abgsp SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: used, Year of construction: 2019, x-travel 1300 mm y-travel 670 mm Hodpfx Aoyzt Anebgsp z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: used, machine/vehicle number: IC1371, Year of construction: 2018, operating hours: 142 h, load capacity: 2,000 kg, load center: 600 mm, enginetype: Electric, manufacturer: Doosan Hedpfxjy I Hqls Abgep

Condition: repair required (used), functionality: limited functionality, first registration: 01/2018, Year of construction: 2018, machine/vehicle number: DW6CWLBRAG1010165, We are offering this Doosan machine, model DL200, a wheel loader, manufactured in 2018. The machine has an electronic fault: it starts, but due to the electronic error, it cannot move. Manufacturer: Doosan Hsdpfx Abey S S Epegop Model: DL200 Year of manufacture: 2018 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.