Used Doubel Cluom Milling for sale (9,847)

Year of construction: 1995, condition: good (used), travels: x=1600mm Gsdjh Nuhrspfx Ag Njuh Y=800mm Z=900mm spindle speed max. 2000 revolutions per minute Control HH 407 A Cover of z axis present but defective.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 80-03/224-02, power: 4 kW (5.44 HP), pivoting range: 45 °, Tilting spindle moulder, manufacturer Felder, model F 700 Z, year 2002, motor 4kW, tiltable up to 45 degrees. Plus feed unit with 3 rollers by Haffner, with sliding carriage. Gedexl E R Ajpfx Ag Neuh

Condition: used, Year of construction: 2012, bore capacity in steel (diameter) 28 mm bore capacity in steel perm. 24 mm Gsdexgu Imepfx Ag Nouh spindle taper ISO 40 DIN 2080 Shank diameter 32 mm quill stroke 115 mm x-travel 500 mm y-travel 250 mm z-travel 541 mm turning speed range - spindle 115 - 3.100 U/min transmission ratio 3 transmission ratio 1 115 - 600 U/min transmission ratio 2 270 - 1.400 U/min transmission ratio 3 590 - 3.100 U/min motor 2,2 kW table surface area 850 x 240 mm T-slot - width 18 mm T-slot - distance 80 mm weight of the machine ca. 480 kg dimensions of the machine ca. 1,4 x 1,1 x 2,5 m Drilling and Milling M/C OPTIMUM - OPTImill BF 46 Vario - incl. OPTIMUM base cabinet

Condition: used, Year of construction: 2017, turning diameter 760 mm turning length 710 mm Guodpfx Agexgn Dbe Nsh control Siemens x-travel 50 mm

Condition: good (used), Technical data: Travel paths: Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Gusdpfxow Ebhmj Ag Nsh Quill travel: 127 mm Spindle mount: collet chuck Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted - Documentation Condition: good, workshop-tested

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, total height: 2,200 mm, total width: 1,860 mm, total length: 2,164 mm, table width: 320 mm, table length: 800 mm, type of input current: AC, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10 rpm, table load: 300 kg, overall weight: 2,800 kg, Equipment: documentation/manual, Fully functional milling machine with numerous accessories and manual. Gusdpfx Agsw U Rdns Neh

Condition: used, Used machine Gsdpfx Agexllw As Nouh Data to follow

Year of construction: 1991, condition: ready for operation (used), Control Unit Gujdoxl Hyxspfx Ag Njh Brand HEIDENHAIN Model TNC 415 This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Application Types Milling

Condition: new, The VHF 3.2 is a robust and versatile universal milling machine that fits seamlessly into the category of Conventional Vertical Milling Machines and the product group of Universal Milling Machines. This high-performance model enhances the proven capabilities of the VHF series, featuring a combination of a horizontal spindle and a swiveling vertical milling head, which expands its range of applications. Built with a rigid machine bed from high-strength HT-200 cast iron and equipped with precision-made headstock gears, the VHF 3.2 offers durability and reliability. Its extensive setup area of 1,370x320 mm and the ability to handle angular bores make it suitable for diverse tasks in both repair workshops and educational settings. The machine’s powerful servo-motor provides infinitely variable feed across all three axes, facilitating efficient operations. One can enjoy minimal downtime thanks to rapid positioning of the work table, alongside a comfortable control panel swiveling to enhance usability. Request a quote today to explore how the VHF 3.2 can elevate your machining capabilities in the realm of Conventional Vertical Milling Machines and Universal Milling Machines. Godpfx Aon E Ni Hog Nsuh

Condition: used, BOKO WF3-K, CNC Vertical Milling Machine, Heidenhain 426 CA CNC Control, Table 810 x 1300mm, X 1200mm, Y 755mm, Z 1050mm, Spindle speeds 18 – 1800rpm, Ram travel 300mm, Bed 3100 x 1300 x 600mm, Head 1100 x 1000 x 1400mm, Column 1400 x 1300 x 2400mm, Table and Saddle 3210 x 1250 x 750mm, Panel 1700 x 400 x 2000mm, +Pendant, coolant tank, Milling att. Tooling Gedpfx Aew U Uhqeg Nsuh

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Gsdpfx Aslnfggeg Neuh Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: used, Year of construction: 2009, x-travel 3.500 mm y-travel 1.200 mm z-travel 1.250 mm Control HEIDENHAIN TNC-530 table-size 1.250 x 1.250 mm table weight 4.000 Kg feeds 12.000 mm/min Number of revolutions 4.000 rpm power capacity 24 kW taper ISO 50 DIN 69871 AD spindle head Automatisch 2,5 x 2,5 Grad handwheel Heidenhain HR-410 internal coolant system feed 20 bar total power requirement 46 kW weight of the machine ca. 18.000 kg Gujdsvzhbtjpfx Ag Njh dimensions of the machine ca. 7.800 x 4.850 x 3.530 mm -Integralverkleidung -Doppelter Längsspäneabsauger -Querspanabsaugung -500-l-Tank mit Magnetabscheider-Papierfilter

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Setup dimensions: 1200x80x1350 mm Fence jaws made of wood Including Holz Her 3-roller power feeder incl. stand With chassis Dimensions: to follow Weight: to follow Godpexllxaofx Ag Nouh Availability: short-term Location: Flörsheim

Condition: used, Extension rings, spacer rings with an inner diameter of 40 mm. Image similar Available sets: 5 Price per set: €30.00 + VAT Inner diameter (d): 40 mm Outer diameter (D): 60 mm Gusdpfjxmh T Asx Ag Nsh Widths each: 25/10/10/8/8/5 mm

Condition: used, Year of construction: 2015, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm Control Heidenhain iTNC 640 Guodpfxjxg R N Hj Ag Nsh table dimensions 1.250 x 610 mm spindle tunring speed 12.000 U/min spindle taper SK 40 rapid traverse 32 m/min number of tool places 30 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Internal cooling Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1984, x-travel 410 mm Gusdpoxlufpjfx Ag Neh y-travel 310 mm z-travel 400 mm table-size 700 x 280 mm control Heidenhain TNC 145 tool adaptor SK40 turning speed range 40- 2.000 U/min rapid speed 1,5 m/min feed speeds 1500 mm/min power requirement 2.2 kW quill stroke 63 mm weight 1,3 t total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation

Condition: good (used), Aciera 22VA precision drilling machine Gujdpfsqvnqxjx Ag Njh - In very good condition. - Up to date in terms of safety. - Cross table and digital display included.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15105602, travel distance X-axis: 70 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 9,200 rpm, number of slots in tool magazine: 32, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid obligates the buyer to collect the machine between 01.12.2025 and 05.12.2025. TECHNICAL DETAILS Travel X-axis: 70 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Feed rate X-axis: 9 m/min Feed rate Y-axis: 9 m/min Feed rate Z-axis: 4 m/min Spindle speed (max): 9,200 rpm Spindle speed (min): 50 rpm Spindle mount diameter: 30 mm Number of positions in tool magazine: 32 Max. tool length: 260 mm Max. tool diameter (all positions filled): 63 mm Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg CNC control manufacturer: HEIDENHAIN Gedpexm S R Ejfx Ag Nsuh MACHINE DETAILS Dimensions (L x W x H): 3,500 x 2,400 x 2,200 mm Distance floor to coordinate table: 1,010 mm Distance coordinate table to spindle nose: 125 to 620 mm Horizontal outreach: 370 mm EQUIPMENT Documentation/manual Continuously variable spindle speed FEHLMANN dividing head (4th axis) 126 SK 30 tool holders Supplementary documentation

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos Godsxfhytopfx Ag Njuh -Dimensions: 140/73/H155 mm -Weight: 3.6 kg

Condition: used, 10 spacer rings with an inner diameter of 40 mm and a width of 10 mm. Image similar Available sets: 2 Price per set: €35.00 + VAT Inner diameter (d): 40 mm Outer diameter (D): 60 mm Gedpfx Asxmh Rheg Neuh width: 10 mm

Condition: good (used), Year of construction: 2009, Swing over bed 660mm, maximum machining diameter 360mm, bar capacity 65mm, Gedpsumuflofx Ag Njuh spindle speed 5,000rpm, milling speed 4,500rpm, main spindle power 18.5Kw, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, tool setter, 3 jaw chuck, parts catcher.

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg Guodpfx Aswuurwsg Neh SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / height 150 mm -Dovetail: 140 to 115 mm 22 mm high Godpjxfhygjfx Ag Njuh -Dimensions: see technical drawing in the photos -Dimensions: 215/80/H210 mm -Weight: 6.8 kg

Condition: good (used), Year of construction: 2011, Maximum cutting length 118mm (spindle 1), 125mm (spindle 2), Maximum cutting diameter 165mm, bar capacity 64mm, spindle speed 4,000 rpm, sub spindle speed 5,000rpm, Gjdsu Hk Auopfx Ag Njuh milling speed 6,000rpm, C axis 0.001 degrees, spindle power 15/11Kw, 12 station upper & lower turrets, Y axis +/- 40mm. Fanuc control, swarf conveyor, barfeed unit.

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Dovetail: 190 to 165 mm -Bore: Ø 56 mm -Number: 2x counter bearings available -Price: per piece -Dimensions: 265/77/H122 mm Gedpfx Ajxfhv Ujg Njuh -Weight: 6.1 kg/piece