Used Drill Bit Feed for sale (19,353)

Condition: good (used), Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts Tsdpfx Aascgan Recod -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Todpfxowb Hxvs Aacjd Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head Tedpfx Aoif Az Ueacsd ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Year of construction: 2019, condition: used, New: No Field of application: Construction Serial number: TMG19SEDO186/8992 011xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18688 Specifications: 2019 model Engine hours: approx. 5,100 Hammer hours: approx. 1,700 Power: 116 kW Weight: 10,500 kg Undercarriage (see pictures) Tedpfx Aajxivxlocsd Machine width: approx. 230 cm Winch Undercarriage replaced in 2024 L5 GPS system Grinder Hammer serviced by Epiroc Description:2019 Epiroc T30R drill rig equipped with L5 GPS system.Undercarriage was replaced in 2024.Hammer service performed by Epiroc, engine serviced in-house every 250 hours.Available for prompt delivery. Own weight: 10500 Total Weight: 10500 Width: 230 Kw: 116 Hammer hours: 1620 Engine hours: 4890 Model: FlexiRoc

Condition: good (used), 2 complete manufacturing plants for animal feed products Tedpfx Aaencbnaocod

Year of construction: 2005, condition: used, Apple engineering MM975 Todpfx Aob Ucqloacod Mini Force Feed Depositor Stainless mobile height adjustable single head pneumatic depositor with variable speed scroll feeder in hopper for positive product feeding

Condition: used, Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, total height: 3,800 mm, total length: 5,000 mm, total width: 3,000 mm, table length: 1,520 mm, table width: 1,225 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 2,000 mm, Tool holder SK50, Heidenhain control, machine is ready for collection and immediately operational. Tsdsxga Tnepfx Aacod

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch Todpfx Aovu Dv Hsacjd - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: good (used), electric motor, drive motor, engine -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK Todsw S Tg Tspfx Aacsd -Power: 0.25 kW / 1420 rpm -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Tedpfxjxcyz Ro Aacod Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: good (used), functionality: fully functional, Data --- Drilling capacity 40 mm / St. 60 --- Tapping capacity M 33 mm / steel --- Mounting MK 4 --- 18 speeds 35 - 1,800 rpm --- 5 feeds 0.075 / 0.15 / 0.3 / 0.45 / 0.6 mm/rev --- Tsdpfxjxdu H Re Aacsd ----

Condition: used, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21270 Specifications: Tsdpfoxatqmsx Aacod Model year: 2016 Drilling hours: approx. 1400 Weight: 10,000 kg Undercarriage (see pictures) Winch Ready for delivery Description:2016 Sandvik Dino DC400Ri drilling rig with an almost new undercarriage.The undercarriage was replaced after the last job.The rig is ready for delivery. Own weight: 10000 Model: DC400RI

Condition: excellent (used), Year of construction: 1979, The machine is in very good condition, equipped with a digital display, and immediately available. Todpfx Aajxq Rzqocod Radial drilling machine Maximum height: 2,800 mm Maximum radius: 3,500 mm Spindle: 130 mm Maximum drilling diameter: 72 mm Table: 6,500 x 4,000 mm

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Tedpfx Aasr D T U Doced Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: CLOOS wire feeder, water-cooled Tedpfowrrp Uox Aaced -Type: lCK98A -Dimensions: 660/390/H350 mm -Weight: 23 kg

Condition: excellent (used), Professional drill chuck with SK40 / ISO40 taper, compliant with DIN 69871 A standard. Manufacturer: EROGLU Präzisionswerkzeuge (Germany) – high-precision manufacturing. Model: 03180PB05553 (3/16-IK). Maximum tightening torque: 20 Nm – ideal for drilling and tapping with controlled force. Version with internal cooling (IK – Innenkühlung). Chuck with torque adjustment + / –, allowing protection of tools and workpieces. Solid and durable industrial design – suitable for use in CNC machining centers and conventional machines. Condition: used, in very good technical condition – ready for immediate use. ✅ German quality – precision industrial-grade drill chuck ✅ Ideal for production and workshop applications. Todpfx Aaoxlcz Seced

Condition: good (used), Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 300 kg, table width: 400 mm, overall weight: 870 kg, table length: 300 mm, Electrode diameter 0.1 - 3 mm Electrodes available in brass, copper, or carbide Suitable for starter hole drilling in steel, aluminum, hard metal for wire EDM or for precise, deep, narrow boreholes Manual or CNC-controlled programming cycle Approach cycles Todpfxjw Dqdnj Aacod Includes pump and collection tank on castors Includes drill chuck and seal for 1.5 mm electrodes Machine can be inspected or tested under power at any time.

Condition: excellent (used), TOS-TRENCIN SV 18 RA – Lead and Feed Screw Lathe For sale is a lead and feed screw lathe from the manufacturer TOS-TRENCIN, model SV 18 RA. The machine is in perfect condition and comes from the R&D department of a former VEB in Neubrandenburg (never used in production). ——— Technical Specifications • Swing over bed: 360 mm • Swing over cross slide: 215 mm • Turning length: 1,050 mm • Spindle bore: 40 mm • Distance between centers: 900 mm • Speed range: 14–2,800 rpm (21 steps) • Center height: 180 mm • Total connected load: 6.5 kW • Machine weight: approx. 1.9 t • Footprint (L×W×H): approx. 2.9 × 1.0 × 1.2 m ——— The machine is immediately ready for operation. • Inspection possible at any time • Loading and shipping can be arranged without issue ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net, plus VAT. Subject to modifications and errors. Tedpfxjxk Tyij Aacsd

Condition: used, We are offering a Heller drilling machine, model RB 32/800, for sale. The machine is in good technical condition and ready for immediate use. Todpfxou Tt Dle Aaced

Condition: used, Column drilling machine INFRATIREA - ORADEA Type PH - 031 Serial no. Year of manufacture 1975 Drilling capacity 40 mm Spindle taper MK 4 – short quill Throat 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 – 1500 rpm, 6 gear stages Motor output 2.2 kW Tjdpfx Astrpifeacsd Power supply 400 Volt, 50 Hz - Spindle speed via 6 gearbox stages - Right and left-hand rotation - Automatic feed 0.10 – 0.16 – 0.25 – 0.4 mm/rev - Swiveling drilling table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump in machine base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg Good condition

Condition: excellent (used), Year 1995 Engine 2.5 kW 8 adjustable units dowels glue 21 drills Tedpfxoxnw Ske Aacod

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Tjdpfx Aajw Syyyecsd

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - Dry wall with extraction system and filters - Mechanical conveyor for painted parts with hooks (modular construction, adjustable to the room) - WAGNER painting unit The paint shop was used for painting window frames. Tsdpfx Aaoxmr Tyoced

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Tedpfx Ajxiza Ueacsd

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Tedpsw I Tq Rjfx Aaced Feel free to view our other advertisements for a complete overview of our stock.