Used Drill Machine for sale (65,172)

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Iodpfx Aedzp S Nebvstd Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm Itodpjhx E T Hefx Abvjd -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Condition: excellent (used), Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine Itodpehv S Etofx Abved -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Manufacturer: Gosmeta, pillar drilling machine type B-30N -Motor: 1.1kw -Speeds: 110 - 920 rpm, 5 levels -Table size: Ø 330 mm, travel 510 mm -Spindle mount: MK3 -Spindle stroke: 125 mm -Projection: 300 mm Itedshx E Ugepfx Abvsd -Columns Ø: 120 mm -Dimensions: 490/750/H1850 mm -Weight: 282 kg

Condition: good (used), Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm Isdec Rpnnspfx Abvotd -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Dowel insertion tool for 8 x 40 mm dowels Ijdpfsytq R Esx Abvotd The following issues were identified during testing: - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: new, Bench drill OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition machine - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, throat depth: 180 mm, Table size: 280 x 245 mm, max. drilling capacity in steel: 25 mm, Motor: 750 watts, Columns Ø: 73 mm, Dimensions (LxWxH): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle holder: MK 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch in accordance with IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop switch - Precision spindle bore - Safety electrics with 24 V DC voltage Iedeu R S Exepfx Abvetd - Guaranteed concentricity of less than 0.02 mm measured in the drill sleeve - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Drilling depth stop - Precisely machined, stable drill table with diagonal T-slots running diagonally and circumferential cooling water channel - V-belt cover with safety switch - One-piece cast aluminum Die-cast quill lever with soft-grip handles - Largely dimensioned, height-adjustable safety screen with safety switch - Heavy-duty design of the entire machine - GATES quality belt - Right/left rotation -- Scope of delivery Quick-action drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-nuts Special offer set including machine vice BMS 100 - new exhibition machine -

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum Iedou R Tftopfx Abvotd - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: used, bore capacity in steel (diameter) 20 mm throat 322,5 mm bore stroke 160 mm bore capacity in cast iron 23 mm feed 1-3000 mm/min tool taper SK 30 spindle speed: 55-5000 U/min table surface area ca. 614 x 370 mm column diameter 145 mm machine weight ab. 550 kg with multi-spindle boring head ARBO 20 Automatic turret drilling head with 6 machining stations TYPE ARBO 20 6 work spindles of your choice incl. spindle guard, Itjdpfx Aoyrhynobvsd flange quill, extended column, special software, without protective cover on the machine table manual included (machine and turret drilling head) machine is in a good condition, liitle used. Preowner is a public institution Standard Equipment Machine table adjustment and clamping at the rear of the machine Full motor protection with PTC thermistors for protection against thermal overload - with insulation class F (155°C) Infinitely variable speed control Protection class IP 54, control voltage 24 V Mushroom-shaped pushbutton (latching) for emergency stop on the control panel Main switch (lockable) Technology computer for cutting data determination and machining cycles Drilling depth programming with automatic rapid traverse forward/reverse Precision synchronous tapping without compensating chuck, max. 10 threads/min (spindle speed dependent) Special software for freely programming machining cycles according to DIN/ISO standards Drilling depth input via numeric keypad Zero point adjustment via external handheld control unit Operating hour counter for spindle, feed rate, and piece count

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm Itjdpfx Ajukf Ncsbvod About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000, Machine no. 14000258 >> Travel range X/Y/Z: 500 / 250 / 160 mm >> Travel range W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 >> Infinitely variable spindle speed: up to 9200 rpm >> Drive power: 5 kW >> Footprint (W x D x H): 1850 x 2550 x 2400 mm Accessories: Itjdpfoyu Snzsx Abvsd >> Tool holders >> Heidenhain probe >> Operating manual, electrical diagrams, machine books About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Program creation is particularly easy thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls that enable conventional milling and drilling operations to be programmed directly at the machine using the easily understood plain text dialog. Even at maximum spindle speeds, the machine runs very smoothly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine with extendable roller table 700 mm Isdpfx Absyub Azevstd machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm

Condition: good (used), Year of construction: 2005, travel distance X-axis: 12,000 mm, travel distance Y-axis: 3,500 mm, Technical Description - X-Axis (Longitudinal Travel Path – Table): 12,000 mm - Programmable Feed Rate: 0.5 – 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Y-Axis (Vertical Travel – Column): 3,500 mm - Programmable Feed Rate: 0.5 – 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Rated Motor Torque: 42 Nm Z – W Axis (Spindle Head): - Boring Spindle Diameter: 150 mm - Axial Travel, Boring Spindle (Z): 1,200 mm - Z-Axis Rapid Traverse: 20,000 mm/min - Boring Spindle Taper: DIN 69871, ISO 50 - Milling Spindle Diameter: 254 mm - Front Bearing Inner Diameter, Spindle: 200 mm - RAM Dimensions: 400 x 400 mm - Axial Travel, Boring Spindle (W): 1,000 mm - Rapid Traverse W-Axis: 15,000 mm/min - Total Axial Travel (Z+W): 2,200 mm - Rated Spindle Motor Torque (W and Z-Axis): 42 Nm - Number of Spindle Gear Steps: 2 - Spindle Speed Range: 6 – 3,500 rpm - Spindle Motor Power: 60 kW Clamping Plate Fields: - Dimensions: 2 units at 1,500 x 4,500 mm; 1 unit at 2,000 x 4,500 mm - Load Capacity: 15,000 kg/m² Workpiece Table (Axis V1 – B1 / V2 – B2): - Table Dimensions: 2,000 x 3,000 mm - T-Slot Dimensions: 28 mm - T-Slot Pitch: 180 mm - Table Top Height Above Floor: 650 mm - Load Capacity: 40 t Tool Rack Magazine ATC 13-150 R 147 - Maximum Magazine Capacity: 147 tools - Maximum Tool Weight: 35 kg - Maximum Tool Length: 700 mm - Tool Taper: DIN 69871 - Tool Change Time: 28 sec Milling Head with Indexed Vertical Axes Model TTL 2 18 360 - Tool Holder: ISO 50, DIN 69871 EQUIPMENT: - CNC Control: Heidenhain iTNC 530 - Electronic Handwheel - Chip Conveyor (Year of Manufacture: 2023) - CE Marking Iedpfx Asyuxd Njbvetd - Documentation

Condition: good (used), Radial drilling machine (used) Itjdpfx Aoyu Hwdobvsd Manufacturer: Mikrosa Year of manufacture: 2001 Model: SRB 35 Drilling capacity: Steel 35 mm, Cast iron 40 mm Thread cutting capacity: Steel M20, Cast iron M24 Spindle taper: MT 4 Spindle speeds: 20 – 2800 rpm, infinitely variable Automatic feed, stepless adjustment Spindle travel: 140 mm Arm reach: 1000 mm Table size: 1050 x 400 mm Column diameter: 200 mm Installation height: 600 mm Power requirement: 7.8 kW Footprint approx.: Width 1250 mm, Depth 2100 mm, Max height 2700 mm Weight approx.: 2000 kg Hydraulic clamping Thread cutting device Depth stop Lateral clamping surface Drill chuck 2 gearbox stages The machine is in excellent condition, runs very smoothly, and is ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Machine location: 48477 Hörstel

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 150 mm thread capacity 30 M spindle taper MT 4 MK column diameter 125 mm Iedpfxjwp Tp De Abvstd bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: ready for operation (used), Year of construction: 1981, Available immediately from Swiss toolmaking facility: Rapid radial drilling machine HKS Model HKS 40 Year of manufacture: 1981 Morse taper MK 4 Drilling capacity: 40 mm Arm reach: 1120 mm Installation height: 780 mm Table size: 1520 x 560 mm 3-axis digital readout for table adjustment Itedpfx Absyvg T Njvjd Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total power consumption: 6.5 kW Hydraulic vice Weight: 2600 kg Offered at a price of EUR 2,500.— plus VAT ex location

Condition: excellent (used), Year of construction: 2004, Maximum working width with end drilling : 2250 mm Itedsyuuyajpfx Abvod Maximum working width without end drilling : 2800 mm Left drilling unit : 5 drills/CC 32 mm Right drilling unit : 3 drills/CC 32 mm Top drilling : 1 x 7 + 1 x 5 + 1 x 5 + 1 x 3 drills ( 4 units in total ) Behind drilling : 1 x 7 + 1 x 7 + 1 x 7 + 1 x 5 ( 4 units in total ) Bottum drilling : 1 x 3 + 1 x 1 drills ( 2 units in total ) Magasin with return conveyer to operater Digital display with different drilling cyckles Digital outread of length on all drilling units

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) - Infeed and outfeed: 2900 mm Iedpoyuiwaofx Abvjtd - Glass thickness: 3-30 mm - Overall length: 6000 mm - Width: 2000 mm - Height: 2200 mm - Condition: As new - Year of manufacture: 2011

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Isdpfjxlqxfex Abvotd Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: excellent (used), functionality: fully functional, Grindable diameter from 2 to 40 mm. Smallest and largest point angle: 40 – 180°. For right- and left-cutting tools, 1-12 cutting edges. Suitable for sharpening twist drills, step drills, and taps. Accessories and an operating manual are included. Ijdjyuta Sjpfx Abvstd

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Iedpfjxwaz Hsx Abvstd

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: Iedpexnlflofx Abvetd - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: ready for operation (used), Year of construction: 2003, bore capacity in steel (diameter) 40.0 mm threading M 24 in St 60 throat 293 mm bore stroke 140 mm morse taper 3 Kurzspindel MK Itodpoynbfpofx Abvjd table: 514 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm throat 293 mm distance spindle /table min 117 / max 701 mm T-slots 2 x 14 x 224 feed 0.1 + 0.2 mm/U total power requirement 1.45 / 1.90 kW weight 370 kg dimensions of the machine ca. 1200 x 800 x 1840 mm current new price ~ 12.500 euros special price on request Equipment: - robust column drill - V-belt - - infinitely variable speed adjustment - analog speed system - automatic spindle feed - thread cutting device - pole-changing drive motor - height-adjustable work table - machined base plate - feed overload protection - Main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection - Operating instructions in German * Special equipment included : - Thread cutting device * with foot switch, for thread cutting with stop - Machine light - Coolant device in the machine base

Condition: used, Year of construction: 1976, arm length 1450 mm taper MK 4 Cube ja weight of the machine ca. 3 t Itedpjyn R N Djfx Abved

Condition: excellent (used), Control: Heidenhain TNC 124 Travel paths X/Y/Z: 500/250/160 mm Travel path W: 480 mm Clamping area (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool quick-change system: SF 32 Stepless speed range: 9200 rpm Itsdpfx Absyvrfdsved Drive power: 5 kW Required space (W x D x H): 1850 x 2550 x 2400 mm