Used Drill Stand for sale (13,291)

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill Pjdefc Hfyepfx Adljgk -Nominal input: 740 watts -Max. drill bit: Ø 13 mm -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Condition: excellent (used), functionality: fully functional, Working diameter: 2–40 mm. Minimum and maximum point angles: 40–180°. For right- and left-side cutting tools, 1–12 cutting edges. For sharpening twist drills, step drills and tap drills. A wide range of accessories and a user manual for the machine are included. Clean and good condition Pgodpfx Adoy Hb T Eeljk

Condition: new, Year of construction: 2020, bore capacity in steel (diameter) 40 mm throat 220 mm bore stroke 120 mm spindle taper MT 4 spindle turning speed range 105 - 1257 U/min no. of turning speeds 8 Stufen table surface area 400 x 320 mm base plate 390 x 650 mm voltage 400 V / 50 Hz total power requirement 1,1 / 1,8 kW weight of the machine ca. 0,3 t range L-W-H 2,1 x 1,0 x 0,7 mm with quick-action drill chuck 3-16 mm, drill chuck protection, work table can be rotated, swiveled and height-adjusted, coolant device, lighting, right/left spindle rotation, Pjdpjy Erwlsfx Adlegk mechanical depth stop,

Condition: used, y-axis 1.000 mm Pjdpfx Adjy A Tc Dslsgk table dimensions 1.000 x 600 mm bore depth 150 mm bore diameter 32 mm spindle tunring speed 30 - 2.650 U/min output 6 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping Podey Ed I Aspfx Adlogk - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Pgodpfxjy Ed H Se Adljk Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 50 mm Pgedpfx Ajy Ehxrodlok arm length 1250 mm bore capacity in cast iron 60 mm quill stroke 300 mm tool taper MK 5 speeds 25 - 1440 U/min feeds 0,08 bis 0,58 mm/U thread cutting attachment ja Boring motor 4,0 kw weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 0,75 x 2,15 m Radial drilling machine - Mounting cube 800 x 600 x 500mm - Coolant system - Good condition

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm Pgodpofg U Tqjfx Adlok table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: Pgsdpfx Adsfg U Tpsljk - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Pgsdpfxsfg U Tie Adlok precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm Pjdpfsfg U Tnsx Adlogk table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip Pgodpfjfg U Thjx Adljk - 230 volt mains connection

Condition: excellent (used), machine/vehicle number: XL919629135075522, axle configuration: 2 axles, first registration: 09/2003, total length: 11,240 mm, total width: 1,900 mm, wheelbase: 880 mm, color: other, Year of construction: 2003, Damages: none XL919629135075522 = More information = Empty weight: 4.900 kg Carrying capacity: 3.100 kg GVW: 8.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: OH-15-HL Podoynh Ikjpfx Adlogk = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2013, operating hours: 9,462 h, Horizontal drilling and flushing rig, Tracto Technik, Grundodrill 18 ACS * Grundodrill * Model 18 ACS * Year of manufacture: 2013 * 9,462 hours (as per meter reading) Pgjdpfx Adoyq Aqljlok * Driven by 4-cylinder Cummins diesel engine with 123 kW / 167 HP * 2 speed ranges * Single cab with 1 seat * Transport dimensions (L x W x H): 6450 x 2350 x 2650 mm * Weight: 15,110 kg * Crawler chassis with 34-37 mm rubber tracks * Undercarriage length x width: 2650 x 460 mm * Rod magazine (holds 50 drill rods? Diameter: 60 mm) * 1 x drill head, see pictures * Remote control, air conditioning, locating system This description does not represent a binding offer and may contain errors. No guarantee on all information provided. Please also visit our homepage.

Condition: good (used), machine/vehicle number: M4137-1280, functionality: fully functional, rotational speed (max.): 960 rpm, For sale is a Snow TA-3-S tapping machine. The item is in good condition. Two units available. Technical data: Manufacturer: Snow Manufacturing Model: TA-3-S Serial number: M4137-1280 Motor power: 0.55 kW Speed: 960 rpm Voltage: 380 Volt Frequency/phase: 50 Hz / 3 phase Control voltage: 110 Volt Transport and loading can be organized Europe-wide for an additional fee, upon request. Prices are subject to VAT. Pedpfx Adey Hihkeljgk Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further info or contact options, please visit our website.

Condition: good (used), Internal Item No.: 26041 Drill Bit Grinding Machine REMA Model: S2/40 Power: 0.9 kW / 380V 2900 rpm Including accessories Dimensions (LxWxH): 100 x 70 x 120 cm Weight: approx. 200 kg Pgsdjy Hr R Uopfx Adlsk The machine is fully operational and can be inspected under power, by appointment, in over 500 m² of heated storage space.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Pjdpfx Aevvi I Rodlsgk

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Psdpfx Adjvvkq Toljgk Storage location: Nattheim

Condition: used, Storage location: Nattheim Pgedpjvvkrdjfx Adlok

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Storage location: Nattheim Podovvi Auepfx Adlegk

Condition: used, Year of construction: 1998, - Year: 1998 - Documentation available: No - CE certificate present: No Financial information Pjdpeych I Tofx Adlsgk VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Empty weight: 1.310 kg Pgsdpfx Adsxy Rk Relek - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Psdpowfpbbofx Adlogk Lukas van Rossum

Condition: used, total width: 1,000 mm, total length: 2,200 mm, total height: 2,500 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 6 - Y-axis travel [mm]: 1000 - Table length [mm]: 1300 - Table width [mm]: 600 - Drilling depth [mm]: 150 - Drilling capacity [mm]: 32 - Max. Reach [mm]: 1000 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) Pgjdpfxewnilxj Adlok - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 1,000 mm, total length: 2,500 mm, total height: 2,150 mm, Empty weight: 3.000 kg - Documentation available: No - CE certificate present: No - Serial number: 73101 - Drive system: Conventional - Power [kW]: 2.8 - X-axis travel [mm]: 1000 Pedpfx Aoytf Ryodlegk - Table length [mm]: 1700 - Table width [mm]: 770 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 45 - Max. Reach [mm]: 1450 - Tool holder: MK5 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2500mm x 1000mm x 2150mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum