Used Drilling Rig for sale (6,745)

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm Ledpfxewid Uwo Aifead dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm Lodpfx Aeviqybsifead spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: excellent (used), Capacity: 32 mm Spindle taper: MK-3 Spindle speeds: 9 steps between 104–1450 rpm Feed rate: 0.1/0.2 mm/rev Throat depth: 300 mm Ledsy Nixzjpfx Aifoad

Condition: excellent (used), Column Drilling Machine Manufacturer: WEBO Model: V 5 Morse taper: MK 3 Clamping table: 470 x 380 mm Laedeywhu Dspfx Aifjd Max. installation dimension, table to spindle: 900 mm Throat depth: 300 mm Infinitely variable speed, min. 125 max. 1080 rpm 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/rev Quill stroke: 170 mm 380 Volt 1.5 kW 3.5 A Accessories: Drill chuck 3-16 mm Coolant system The machine is in very good condition Transport dimensions: Length 900 mm Width 700 mm Height 2260 mm Weight 630 kg

Condition: good (used), machine/vehicle number: M4137-1280, functionality: fully functional, rotational speed (max.): 960 rpm, For sale is a Snow TA-3-S tapping machine. The item is in good condition. Two units available. Technical data: Manufacturer: Snow Manufacturing Model: TA-3-S Serial number: M4137-1280 Motor power: 0.55 kW Speed: 960 rpm Voltage: 380 Volt Frequency/phase: 50 Hz / 3 phase Control voltage: 110 Volt Transport and loading can be organized Europe-wide for an additional fee, upon request. Prices are subject to VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Ledpfsy Hihkex Aifjad For further info or contact options, please visit our website.

Condition: used, Year of construction: 1980, voltage 50 V frequency 50 Hz ampere 3,7 A 21882 Lsdjx U A Slepfx Aifead speeds: 3 Dimensions (L/W/H) 800 x 800 x 2200 mm weight 380 kg

Condition: used, Year of construction: 1980, 1980 tool taper MK 205 - 1450 m/min. boring range: 3 - 40 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Lodpfx Aer Dv Tgjifsad +++++

Condition: used, Year of construction: 1965, 40-1080 tool taper MK 5 weight of the machine ca. 2 t feed . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Ledjiyzqqopfx Aifead

Condition: used, Year of construction: 1980, ja Lasdpfxoix Rdme Aifjd feed 80 - 800 m/min 1848 weight of the machine ca. 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1979, taper MK MK5 round table ja weight of the machine ca. 1.200 kg +++++ Lsdpfof Ek Risx Aifsad Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 3 - 16 mm max. 1500 mm weight 300 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Lodpfehmribjx Aifoad

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg Lsdpefym Hujfx Aifjad +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V connected load 2,6 kVA Lajdjrxg S Topfx Aifjd rated current 6,1 A weight of the machine ca. 1 t

Condition: used, Year of construction: 1980, taper MK 4 serial number 520 weight of the machine ca. 440 kg Lodpfew Sydlsx Aifoad

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Lajdslhwr Repfx Aifod Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: good (used), functionality: fully functional, type of input current: three-phase, spindle mount: MK 1, rotational speed (max.): 1,800 rpm, throat depth: 200 mm, table width: 320 mm, table length: 250 mm, mount diameter: 80 mm, stroke length: 70 mm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz morse MK-1 chuck max drill size: M6 -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm -Reach: 200 mm -Column Ø: 80 mm Lajdpswzaqxsfx Aifod -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg

Year of construction: 2010, condition: ready for operation (used), Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Lasdpfou N Hdaex Aifsd

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Lsdpszkt A Rjfx Aifsad Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Model: ZB 32 Capacity: 2.5-32mm With Cams Lodpfx Aiszlhlpofsad

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Lasdpfx Aozlg Szjifsd Model: 108

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Lasdpfx Aijzdki Uefsd Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Laodpfxjv Aalyo Aifod Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Lodpfxjzi Tqlo Aifead

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Lodpfxjzmunts Aifsad Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 4, drilling depth: 240 mm, total width: 480 mm, total length: 550 mm, drilling capacity: 45 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, spindle stroke: 240 mm, SPECIFICATIONS Brand: Erlo Model: TCA-45 Capacity: 45 mm ø Table length: 550 mm Table width: 480 mm Spindle taper: MK4 Laodpfjx Dcfhsx Aifod Speed: 68 - 1,270 RPM Arm reach: 360 mm Stroke: 240 mm Table height adjustable manually Automatic feed Gear-driven Machine dimensions: 1,000 x 700 x 2,400 mm