Used Dryer for sale (1,825)

Condition: used, ALTO Encore L 2426 Shower suction machine / 24 VDC / 75A / IPX 3 / Weight 395 kg Prsdpfx Ajg Ngmxjdisd

Year of construction: 2022, operating hours: 2,113 h, condition: excellent (used), functionality: fully functional, Drum dryer Agromech M-829 with a chip-feeding stoker for the furnace. The drum dryer is equipped with a coal furnace adapted for burning wood waste or sawdust briquettes. The entire drying process, as well as the regulation and control of the drying air temperature, is semi-automatic and carried out by the dryer operator. THE DRYER IS BUILT FROM THE FOLLOWING MAIN COMPONENTS: * Coal furnace with thermal insulation, adapted for burning sawdust briquettes and wood waste * Wet sawdust feeder – chain-slat type, pit-installed, smoothly controlled by an electric inverter with a system for smooth dosing of the material to be dried * Insulated loading connector * Thermally insulated drying drum, length 9.00 m * Discharge chamber for dry material * Main dedusting cyclone with feeder * Main radial fan * Electrical control cabinet with temperature measurement and control instrumentation * Inclined screw conveyor for discharging dry material TECHNICAL CHARACTERISTICS: 1. Nominal capacity of the dryer at initial sawdust moisture 40–45% and final 15% – 1,000 kg/h 2. Amount of evaporated water – 1,100 kg/h 3. Maximum thermal power of the solid-fuel furnace – 1,000 kW 4. Maximum temperature of drying air at the drum inlet – 600–650°C 5. Average fuel consumption: * Hard coal or fuel with similar calorific value: 200 kg/h Podpfx Asxzup Tsdisrd * High-calorific sawdust briquettes: 250–300 kg/h * Wood chips with moisture up to 35%: 250–350 kg/h 6. Total installed electrical power – 17 kW 7. Total weight of the dryer with refractory insulation – 16,500 kg The dryer was manufactured, assembled, and commissioned in November 2022. Operating hours: 2 113

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 12 months, input voltage: 400 V, The dryers of the BD 360+ to 1260+ series are heat-regenerated adsorption dryers that remove moisture from compressed air through an adsorption process. All dryers in this series are equipped as standard with an innovative Smart Cycle control algorithm, which leads to significant energy savings during partial load operation without the need to add an expensive option. Podpfx Aet It N Sedijrd All components are mounted on a common base frame, fully wired and ready for installation, with generously sized vessels and piping to minimize pressure drop within the dryer. The dryer can deliver dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured, including the following special equipment: - Pressure dew point sensor - Vessel insulation - Blower filter Brand new with 12-month warranty from date of delivery. Optional installation and commissioning at a very competitive price is available from stock in Wettenberg.

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini Prodpfx Ajxn Nlvsdiod - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs. Prjdoxyxnqspfx Adisd

Condition: used, Year of construction: 2016, Power: 11 kW (15 HP) // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) – Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% – 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Prodpfx Adjxn Az Reied Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L – EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 – EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit – AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar – Jacket temperature: 142°C – Surface area: 1.65 m² Cooler, mounted on the heater: cold water or brine – Pipe jacket pressure: 12 barg – Jacket temperature: 142°C – Pipe temperature: -10°C /+ 99°C – Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 2019, operating hours: 413 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber dryers Podpfoxz Iqwex Adisrd Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V

Condition: excellent (used), Screw compressor, compressor, compressed air unit, compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Manufacturer: JUBA, compressor with dryer -Compressor: Type JB 1500WX4 -Volume flow: 520 l/min -Engine power: 6 kW -Pressure: 7 bar Prodpfx Adsxl Rxfoisd -Tank capacity: 160 l -Dryer: Type JB-10AC 0.5 kW -Drying capacity 1.5 m³/min -Individual components: see photos -Transport dimensions: 1320/820/H830 mm -Total weight: 180 kg

Year of construction: 2014, condition: ready for operation (used), A Büchi laboratory spray dryer is available. Evaporation capacity: 1l/h, heating power: 2300W, max. inlet temperature: 220°C, air flow rate: 35m³/h, spray gas flow rate: 200l-800l/h, pressure: 5bar-8bar. Machine dimensions X/Y/Z: approx. 650mm/700mm/1100mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Prsdpfx Asxvrucsdijd

Year of construction: 2011, condition: used, Rated power: 5.5 kW Motor speed: 2930 rpm Max. operating pressure: 11 bar Dryer type: CT 8 Refrigerant: R134a Refrigerant charge: 0.260 kg Max. operating pressure (cooling system) HP 21 bar / LP 16 bar incl. Aquamat CF 3 oil-water separator Storage location: supplier Pjdpfx Adsxtnvkjiord

Year of construction: 2001, condition: refurbished (used), functionality: fully functional, with safety system for solvent-based substances according to DIN 1539, including exhaust air fan, supply air cage filter, as well as concentration monitoring and recirculation filter wall in the interior Completely overhauled, 12 months warranty -Internal dimensions (WxDxH): 1000 x 1000 x 1500 mm -External dimensions (WxDxH): 1900 x 1430 x 2315 mm -Volume: 1500 liters -Max. temperature: 300°C -Eurotherm Controller 2404 (20 programs, each with 16 segments) -Eurotherm data recorder -Connected load: 29 kW -6 mesh shelves included, as well as V2A support brackets -Minimum exhaust air volume flow: 360 m³/h -Maximum permissible solvent quantity: 36 g at nominal temperature of 300°C -with concentration measurement -Window seals renewed -Approximate net weight: 1200 kg -Including documentation, CE Declaration of Conformity Viewing possible by appointment in our warehouse. We supply new and used industrial furnaces. Contact us! Oven, drying oven, kiln, heat oven, heating cabinet, industrial oven, paint dryer, tempering oven, heating oven, annealing oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating air drying cabinet, recirculating air oven, solvent oven Prodpfxevcb U As Adiod

Condition: used, // Equipment dismantled and stored in our warehouse // Manufacturer: Larox / Pannevis (Larox B.V.) Model: RT®/FT 1.15 x 5.6 m Type: Vacuum belt filter Year: 2008 (1988 version refurbished) Application: Liquid/solid separation, with cake drying and filtrate recovery. FT = Fume-Tight Pedpfx Ajxnc Nhedierd Materials: stainless steel Filter area: 6.4 m² Cake cleaning: – Option to perform several washing stages, with each filtrate collected in its own receiver (purity up to 99.99% or more) with low washing water consumption. – Backwashing Repositioning of the tray and support grids at each retraction Operation/power supply: continuous Continuously washed filter cloth Cloth orientation and tensioner Extraction screw Skid with 3 filtration tanks and circulation pumps Vacuum pump skid: – Sihi Sterling LPHA 70123 (Atex) – Liquid ring: ethanol – 855 m³/h – 21.83 KW – Heat exchanger – Recirculation pump – Separator tank Main machine weight: 3000 kg Main machine length: 913 cm Full technical documentation (paper and digital versions) Electrical cabinet

Year of construction: 2016, condition: excellent (used), PIOVAN Dryer DPA20 (2016) Prjdpfx Aexyi Dcjdiod Drying capacity: from 0.5 to 25 kg/h. Process (air) airflow for DPA20: 5 ÷ 10 m³/h. Drying hopper volume for DPA20: 20 dm³ (20 litres). Temperature range: 40-150 °C. Dew point: standard down to -25 °C, with optional desiccant cartridge/tower down to -40 °C. Compressed air supply: oil-free, filtered air, pressure ~ 5-7 bar. Control features: airflow managed in 7 increments/levels, material database of ~50 materials pre-loaded.

Year of construction: 2014, condition: excellent (used), 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Hersteller: SOMOS / Mann + Hummel mit Fördergerät Podpfx Adsiq Ng Rsiord Typ: T200 MC2 Baujahr: 2014 Inhalt Trichter: 20 Liter Trichter: Edelstahl Trockenluftmenge: 200 m³/h Trockenlufttemperatur: max. 200° C

Year of construction: 2003, condition: good (used), dryer dry-air KOCH CKT 300, 300 m³/h, year: 2003, price: 6.900 €, contact: Mr. Rainer Eckerle Pjdjd E N Nzopfx Adijrd

Year of construction: 2023, condition: excellent (used), functionality: fully functional, FIBIR FED 35 – Industrial Tumble Dryer in Excellent Condition Prjdpfx Ajxqh Afsdijd For sale: High-quality industrial tumble dryer, model FED 35 from FIBIR – ideal for laundries, hotels, nursing homes, or service providers. 🔧 Technical Specifications & Highlights Manufacturer: FIBIR (Italy) – FED Series Model: FED 35 – Capacity approx. 35 kg Construction: Drum in stainless steel (AISI 304) Drive: Belt drive system Operation: Front control panel, simple and user-friendly Filter: Large, front-mounted, easily accessible stainless steel filter – ensures optimal airflow and reduces maintenance effort Year/Build: 2023 Condition: "Very good used", fully functional Location: 26810 Westoverledingen Used machinery ✅ Why choose this dryer? High capacity for large laundry loads – perfect for heavy-duty drying requirements Professional quality (stainless steel, robust drive system) – durable and easy to maintain Ready for immediate use – no general overhaul needed with good maintenance Good condition and proven model – a reliable investment ℹ️ Additional Information & Notes The sale is for a used item, price and terms by agreement Inspection possible by appointment – see for yourself on site Pickup or optional transport arrangement available Proper invoicing provided. Feel free to contact me with any questions, requests for more images, or to receive a short demonstration video. _____ Industrial dryer with stainless steel drum • Belt drive system • Controls located at the front, easy to operate • AISI 304 stainless steel filter easily accessible from the front; its large size ensures optimal air circulation and minimal maintenance 35 kg Operational, ready-to-use machines Listing and price refer to one machine // 2 units available

Condition: good (used), Year of construction: 2003, machine/vehicle number: 3101, Kaeser TD51 Refrigerated air dryer Serial: 3101 2003, Refrigerant R34A, 18Bar Podpfjqqhkpsx Adisrd

Condition: used, machine/vehicle number: 05-96, MASPELL DRYER TYPE PRESS M: Wood capacity: 1.6 m3 Hot water heating system, New heating element, 5 plates of 1000 x 5000, Prodpfx Adexuv Nneisd Stainless steel chamber dimensions: 6000 x 1700 x 1000

Condition: used, Year of construction: 2018, functionality: fully functional, Type: Air dryer Manufacturer: HANKINSON Model: SPXFLOW HFQ2400 Year of manufacture: 2018 Prjdjxz D E Depfx Adied Serial number: 1018003 Condition: Used Quantity: 1

Condition: excellent (used), Year of construction: 2021, ATLAS COPCO CD335+ adsorption dryer (demonstration unit) like new Capacity: 19.80 m3/min Year of manufacture: 2021 Operating hours: 10 h Pjdpfx Aoxy Ht Iodijrd The dryer is fully functional; We provide servicing. Net price: PLN 16,200 Gross price: PLN 19,926

Year of construction: 1994, condition: used, dryer dry-air KOCH CKT 300, 300 m³/h, year: 1994, price: 4.900 €, contact: Mr. Rainer Eckerle Podpob Hu S Tsfx Adisrd

Year of construction: 2022, condition: excellent (used), Technical Specifications Process airflow approx. : 50 m³/h for DP604 (range for the series: 50–150 m³/h) Process air blower: 0.25 kW (DP604) Prodpfx Adexxywqjied Heating power (process heater): 2.5 / 3.5 kW Maximum process air temperature: up to 200 °C (HT version) Dew point (dry air): lower than –50 °C Weight: 235 kg Drying hopper capacity: 30–400 dm³, depending on configuration (1 or more hoppers)

Condition: good (used), Nilfisk Prof scrubber dryer Serial: SC410 Podsqqhq Ispfx Adierd Floor cleaner, scrubber dryer

Year of construction: 2025, condition: new, functionality: fully functional, Professional rotary drum through-flow tubular dryer for small fraction raw materials: plastic granules, mint leaves, herbs, tobacco, flax, hemp, etc. The unit is equipped with a burner from the renowned Lamborghini brand. All components are included in the price—dryer is ready for operation. The processed material does not come into any contact with flame or smoke whatsoever. Drying is carried out using hot air (operating temperature can be adjusted). The main advantages of our dryer are quiet, reliable, and economical operation. Additional information: - Drum drive power supply: 1.5 kW - Infinitely variable drum rotation speed control (material conveying) Prsdpfx Ajv D Hdxedied - Heating capacity: 40-100 kW - Fans: 2 x 2500 m³/h - Burner powered by heating oil/diesel fuel (ON) - Temperature display inside the heating chamber - Minimum and maximum temperature controllers inside the heating chamber - Automatic burner start and stop during operation - Exhaust gas outlet - Moisture removal - Safe and easy to use - Drum rotation: left/right - All electrical connections carried out by a qualified electrician - All spare parts available immediately—we are the manufacturer of the machine - Custom modifications available according to individual customer requirements - We have a complete machine park and a spacious production hall, operating at the same location for several decades—we do not engage in misleading practices, we are always available by phone and ready to provide assistance.

Year of construction: 2025, condition: new, functionality: fully functional, Professional Drum Dryer: SB-3000 OPTIMECH For sawdust, wood chips, peat, flax, hemp, grain, biomass, manure, corn, rapeseed, tobacco leaves, mint, herbs, plastic granulate, copper, aluminum, sand, fruits, vegetables, stones, seeds, mushrooms, bread, etc. Complete unit, ready for operation. Our dryers have been operating trouble-free at our clients’ facilities for over 15 years. The machine is adapted for almost any type of raw material. The material has absolutely no contact with exhaust gases or open flame. Drying is carried out by a heat exchanger, exclusively using hot air. No risk of self-ignition or scorching of material (drying temperature is adjustable). The dryer operates best in enclosed spaces with an ambient temperature of at least +10°C. Efficiency: removal of approx. 10-15% moisture/hour; Podpfx Asv D D Axodiord - drum rotation power supply: 1.1 kW (very low power consumption thanks to a large gear wheel); - hot air heater power supply: heating oil/diesel fuel; - heating oil consumption: approx. 5 L/hour; - total electricity requirement: approx. 3 kW; - high-performance Italian fans (2x 2500m3/h); - exhaust gases discharged exclusively in one location; - mechanical steam extraction with cyclone separator; - rotary heat recovery system (entirely made of stainless acid-resistant steel); - safe and easy to operate; - drum rotation: left/right; - control cabinet and all electrical connections performed by a qualified electrician; - all spare parts available immediately, we are the manufacturer of the machine; - possible custom modifications according to individual customer requirements; - we have a complete machinery park and a spacious production hall at the same location for 40 years, we are honest, transparent, always available by phone, and ready to assist. Single batch capacity: up to 1.5 m3. Thermal power: 40-100 kW. Drying temperature adjustment (controller with temperature sensor). Reliable oil burner from renowned brand: LAMBORGHINI. Option to purchase the machine without the horizontal conveyor visible in the photos and video.