Used Drying Oven for sale (3,411)

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Model: Sprint International Podpoy Au Ubefx Abuerc Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.

Condition: good (used), drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet -Manufacturer: MLW, drying cabinet type WSU102 -Usable space: WHD 500x420x435 mm Pedpfx Aovg Hb Asbuorc -Heating power: 2.16 kW -Nominal temperature: 320°C -Individual components: see photos -Dimensions: 630/1000/H840 mm -Weight: 118 kg

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Prodpfjh Tyrwsx Abujc Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: used, Heraeus Type: UT 6060 Heraeus heated convection drying cabinet, up to 300 °C Manufacturer / Type: Heraeus UT 6060 Features: Temperature range: 300°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Psdpfx Abezdr Dyjujrc Rated current 6.8A, Rated power 1.50kW Includes 2 inserts Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Year 2007 Working width 1400mm. Podpfxoyzr Age Abusrc Total length 2,00m Very good condition, available immediately.

Condition: used, Heraeus Type: UT 6060 Pedjzd Uydopfx Abujrc Heraeus heating and drying cabinet, up to 250°C Manufacturer / Type: Heraeus UT 6060 Features: Temperature range: 250°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage: 230V, 50/60Hz Rated current: 6.8 A, Rated power: 1.50 kW Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 2391, Offer 25398 Technical Data: - Temperature continuously adjustable up to 300 °C - Power supply: 220 V - Usable internal chamber: 300 x H 530 mm Prodjygk A Iepfx Abuoc - Space requirement: approx. 700 x H 750 mm - Weight: approx. 25 kg

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W Pjdpfjx Sw N Hex Abusrc -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Condition: used, SNOL Type: SNOL 120/350 SNOL heating and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume: 120 liters Internal dimensions: 555x350x555 mm 400 volts, 50 Hz, 6 kW Vertical air circulation via built-in fan, over-temperature protection Chamber made of stainless steel Door hinge on the right, includes two shelves Low power consumption Fast heating and cooling times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (See picture) Pjdpfx Ajziiutebuerc (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Drying oven Seho GoReflow 1.8. 23101297679 unused 2023 price: €27,842 23101297680 unused 2023 price: €27,842 Pjdpfxox Tg Rcj Abuorc 22081297330 used 2022 price: €14,182

Condition: good (used), Industrial oven, drying oven Type: PKL-1 Maximum temperature: 180 ° C The temperature is adjustable Peded Tiu Ijpfx Abujrc Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Height: 1450/1900 mm Width: 1250 mm Depth: 850 mm Weight: 350 kg We have 3 pieces on Stock!

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Predpfx Asxcybkobuec Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Pedpfxjyg H Dzs Abuerc Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Vötsch Type: NTU 60/60 Rated temperature: 250°C Connection voltage: 400 V 3 (N) PE AC, 50/60 Hz Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Width 1000 mm, Height 1675 mm, Depth 1300 mm Forced air circulation fan Scope of delivery: (See image) Predpozdiyhsfx Abujc (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡 Prsdpefzb Nbsfx Abuec

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Features fan assist / air circulation (electric). Supplied with 15 x bakery racks. Located in Northern Ireland and ready to collect. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Date of manufacture - 1992 ✅ Rating 500-000 Pedsxb Alvepfx Abuorc General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Condition: used, Manufacturer : Memmert Model: B 30 Type : universal oven / incubator Predex R Aulopfx Abuoc   Maximum temperature : 70°C Power : 800 W Total volume : 48 L Inside dimensions : 380 x 300 x 380 mm

Condition: like new (used), Binder VD 23 vacuum dryer, ex-demo, like new. Manufacturer's description: PRODUCT DESCRIPTION The BINDER VD series vacuum dryer ensures gentle drying and impresses with precise temperature control. The patented BINDER expansion shelves provide optimal heat transfer. The shelves can be freely positioned, and the chamber is easy to clean. KEY FEATURES Temperature range: Ambient temperature plus 9°C up to 220°C Controller with digital pressure and temperature display Program-controlled drying monitoring with automatic ventilation at the end of the process Internal data logger, measurement values available in open format, readable via USB 1 aluminum expansion shelf, individually positionable Inert gas connection DN 16 access port – for introducing external measuring instruments Psdpfx Ajx S R A Tebujrc Safety glass window, spring-mounted with splash protection Large observation window, optionally with interior lighting PC interface: Ethernet 5 units in stock

Condition: as good as new (ex-display), Vacuum drying cabinet Internal dimensions: 700 x 700 x 600 mm (depth) Heating output: 3 kW Temperature range: 1-120°C External dimensions: 1280 x 950 x 1280 mm Pressure range: Atmospheric pressure - 0 bar (not suitable for overpressure) Podpfx Asfbl T Nebusrc A suitable vacuum pump will be supplied depending on the application. Power supply: 3-phase, N, PE, 400V, 50Hz, CEE plug The internal components can of course be completely removed!

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Pjdjfzb Nispfx Abusrc 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Pjdpfxsup R U Us Abuerc Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Condition: good (used), Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Manufacturer: Meyer, drying oven type ES 2 -Power: 0.2 kW -max temperature 110 °C -Voltage: 110 V -Usable space: Ø 100 x 430 mm / 2 packages of electrodes -Number: 18x dryers available -Price: per piece Prsdpewbdilsfx Abujc -Dimensions: 170/170/H565 mm -Weight: 7.8 kg/piece

Condition: good (used), Year of construction: 1987, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 mm Pjdpfxeryalbo Abujrc -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible Prjdpfxjyuut Hj Abuoc -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Condition: new, Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones Podpfx Ajcmrxdobuerc circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net