Used Dws for sale (111)

Condition: used, Year of construction: 2017, front tire size: 600/70R28, rear tire size: 710/70R42, Equipment: compressed air brake, front power take-off, Hydraulic cab / LED light package / 1x DW front / StarFire 3000 steering system / DAB / Radio / Refrigerator / / Contact via telephone: / Kdedpfx Agor N Dh Tj Ujn

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets Kdsdjwu D Unjpfx Ag Uen • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: ready for operation (used), Year of construction: 1996, The gravure printing machine was used for wallpaper and other substrates. Number of printing units: 7, track width: 59mm, max. printing width: 53mm, max. roll diameter: 1000mm. King shaft drive / DW 1 + 7, single drive possible. Unwinding with lifting platform aid. Intermediate dryer operated with thermal oil. Paper and non-woven printing substrate, register control. Ksdpfxjr Equys Ag Ujdn

Year of construction: 1995, condition: ready for operation (used), A complete hardening line for small components is available. 1) Tempering furnace LAG 500-650/150-4000. 2) Drum washing machine DWS 450-1100. 3) Oil bath. 4) Bunker with scales and distribution chute. Total plant length: approx. 14700mm, total plant width: approx. 8500mm, total plant height: approx. 4400mm. Documentation available. On-site inspection is possible. Kdedpjv Sctxefx Ag Ujn

Condition: used, Year of construction: 2005, Line Configuration 1. Unwinding Unit - Serame web unwinder 2. Corona Treatment System - Ferrarini & Benelli corona treatment unit; designed for double-sided treatment, currently only the top side is active 3. Web Suction System - Kelva web suction unit 4. Web Register Infeed Printing Units (Offset) 5. Printing Unit DW 1 – Offset 6. Printing Unit DW 2 – Offset - IST UV dryer 7. Web Turn Device - Web turner Possible Printing Configurations: 2 / 6-color printing Up to 8-color printing possible 8. Printing Unit DW 3 – Offset 9. Printing Unit DW 4 – Offset 10. Printing Unit DW 5 – Offset 11. Printing Unit DW 6 – Offset IST UV dryer 12. Printing Unit DW 7 – Offset 13. Printing Unit DW 8 – Offset UV drying Coating and Drying 14. Flexo Coating Unit IST UV and water-based coating Kdsdpfx Agoyhayro Usn 15. Drying Systems Adnos hot air dryer UV dryer available Inspection and Quality Control 16. BST Web Video Inspection System 17. BST 100% Inspection System – IPQ Check Rewinding 18. Rewinding Unit Serame web rewinder Additional Equipment: - Technotrans temperature control system - Web break sensors - Anti-static system - Central control console with: - Eltromat register control system - Operator monitors for machine control and visualization

Condition: ready for operation (used), EWM Integral MIG 450 DW P Pulse Welding Machine Technical data see image no. 2 You are welcome to come for an inspection. Kdsdpeyh Enrjfx Ag Usn We can organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: repair required (used), Year of construction: 2011, operating hours: 104 h, functionality: limited functionality, machine/vehicle number: KN 10 39 17, type of cooling: water, rotational speed (max.): 1,500 rpm, tank capacity: 700 l, nominal power: 128 kW (174.03 HP), nominal power (apparent): 130 kVA, fuel type: diesel, output voltage: 400 V, output current: 188 A, output frequency: 50 Hz, motor manufacturer: Deutz, For sale is an AVS Aggregatebau GmbH diesel generator with the following key specifications: Manufacturer: AVS Aggregatebau GmbH Type: DW 130 De 15 M 12 Unit No.: KN 10 39 17 Year of construction: 2011 Technical Data – Complete Generator: Power output: 130 kVA Voltage: 400V 50 Hz Speed: 1500 rpm Fuel tank: 700 L capacity Ksdpevtpv Nsfx Ag Uedn Consumption: Up to 209 g/kWh, depending on load Operating hours: 104.8 h Detailed Components: Diesel engine Deutz BF6M 1013 E Engine No.: 11021228 Power output: 128 kW Speed: 1500 rpm Water-cooled Generator Mecc alte ECP 34-1L/4 Generator No.: 0001444400 Power output: 130 kVA Cos-Phi: 0.8 Voltage: 400 V Current: 188 A Frequency: 50 Hz The generator set has the following maintenance backlog: - Replace V-belt - Replace battery - Change coolant If dismantling and pickup are carried out by the buyer, the selling price is €18,500. If dismantling is performed by Blue Energy Group AG, additional fees will apply. The components included in the purchase price can be identified in the images.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, plate width: 1,200 mm, plate length: 1,600 mm, G&J flexo plate processor, model Concept 405 DW. The machine is in excellent condition, used as backup for production. Max. plate size: 120x160 cm. Powered on and ready for tests. Kdodpfsyv Agfjx Ag Usn

Condition: used, machine/vehicle number: 0000622128, EWM Titan XQ 400 puls DW Compact, used Model: Titan XQ 400 puls EMC class: A Minimum welding current (A): 5 Maximum welding current (A): 400 Duty cycle at 40°C: 400 A / 80%, 370 A / 100% Open-circuit voltage: 82 V Mains voltage: 3 x 400 V Voltage tolerance: -25% to +20% Recommended generator power: 23.8 kVA Mains frequency: 50 Hz / 60 Hz Cooling capacity: At 1 l/min: 1000 W Pump pressure: 3.5 bar Tank capacity: 8 l Protection class: IP23 Dimensions: 1150 mm x 678 mm x 972 mm Multi-process pulse MIG/MAG welder with all welding characteristics and processes, non-compact, non-modular Kodpfxsyngdws Ag Usdn Drive XQ and Drive XQ HP wire feeders Swivel console for wire feeder "blueCool" coolant down to -10°C (14°F), 5 l, 5 l Interconnection cable set, water-cooled, 14-pin, 1.8 m Adapter for B300 basket spool MIG/MAG function torch, with OLED graphic display, water-cooled, X-technology, 4 m Ground cable with screw clamp, 450 A / 60%, 70 mm² Pressure regulator with manometer, 30 l Mains plug, installed

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Kdsdpoun Sx Ssfx Ag Ujn Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Year of construction: 2008, operating hours: 0 h, condition: new, machine/vehicle number: DW-A-414, Dental Wings Dental Wing 3D Scanner DW-5-140 Year of manufacture 2008. Serial no: DW-A-414 Accessories in a case please check the pictures, also the connection USB cables with the computer. no USB key software is available, only the installation CD. Lamp lighting is confirmed Required PC connection • Detailed operation is uninspected because details are unknown Power 100 W, Input 100—240V, 50-60 Hz Condition: Power ON ok, but not tested. The scanner is new and has never used. price Euro 1.300 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Ksdpfxehalgde Ag Usdn We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana