Used Eccentric Press for sale (28,113)

Condition: used, ECCENTRIC PRESS TABLE 1250 X 850. BRAND ERFURT MODEL PEE II/250 250 TON (1068) Offered by auction due to end of activity and definitive closure of a pre-owned industrial machinery dealer. Brand: ERFURT Model: PEE II / 250 Year of manufacture: 1966 Frame type: Gooseneck Number of connecting rods: 1 Pressing force: 250 t Stroke: 40 – 160 mm Shut height: 500 mm Slide adjustment: 110 mm Table dimensions: 1010 x 760 mm Slide dimensions: 670 x 900 mm Plate thickness: 100 mm Lateral opening: 440 mm Safety fuse: Mechanical Machine weight: 17,500 kg Overall dimensions: 1445 x 2680 x 3275 mm Height above floor: 3,275 mm Tedpfx Asxzr Hvedlef Strokes per minute: 50 Main motor: 22 kW

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Tjdpfxjfrzlmj Adlof Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: used, Russian manufacturing, Max. pressing force: 25 t Table size: 550 x 400 mm Todpfx Aoxbf Sfedlsf

Condition: good (used), – Capacity 25 tons – Table 525 x 405 mm Tjdpfxsxk Tm No Adlsf – Stroke 75 mm – 120 strokes/min. – Foot control or two-hand operation – Central lubrication system – 380V

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Ram Stroke, adjustable in steps: 30...120 mm Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Machine Weight: 7,500 kg - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel Todpsw Ec A Eofx Adlsf - Two-hand operation, stroke gate protected by limit switches - Centering groove - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Tsdjt Ei Hnjpfx Adljf Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: used, STANKO DOUBLE UPRIGHT & DOUBLE CONNECTING ROD ECCENTRIC PRESS, 200 TN WITH 2 FIXED STROKE CUSHIONS, TABLE 2000 x 1250 mm, SIDE STROKE 630 160 TN (637) Liquidation by auction due to business activity termination and definitive closure of a second-hand industrial machinery tool company. Brand: STANKO Model: K-160 Frame: DOUBLE UPRIGHT Number of beams: 2 Press capacity: 200TN Stroke: 200 mm Table size: 2000x1250 mm Ram size: 1900x100 mm Table plate thickness: 130 mm Distance between uprights: 2000 mm Lateral stroke: 750x340 mm Tjdpfxoxzfnye Adljf Safety: Mechanical fuse Machine weight: 30,000 kg Strokes per minute: 36 Cushions: 1 Number of cushions: 2 Motor power: 25 kW

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Tjdpfxjw Tukio Adlef Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug Tsdoxabvkspfx Adljf compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: used, Year of construction: 1965, pressure 250 t throat 450 mm stroke 20 - 140 mm table-size 1210 x 850 mm no. of strokes 35 Hub/min ram adjustment 80 mm ram surface 750 x 320 mm Todpfxew In Dfe Adlof table pass 400 x 250 mm total power requirement 200 HP weight of the machine ca. 16,8 t dimensions of the machine ca. 2,8 x 1,7 x 3,0 m

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. Tedpfxjdzqddj Adlef throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Year of construction: 1966, condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets Tjdpfeir I Slex Adlef pressure 1500 kN (150 tons) stroke 60 mm ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Condition: used, Eccentric press with pneumatic clutch. ARISA 250 brand, table size 1200 x 800 mm, model G 250 TN (5383) To be liquidated by auction due to end of activity and permanent closure of a used industrial machinery dealer. Brand: ARISA Model: G 250-1200-800 Frame: Swan Neck Nominal force (ton): 250 t Stroke: mm Shut height: 600 mm Tedpfexzdh Eex Adljf Slide adjustment: 300 mm Table dimensions: 1200 x 800 mm Plate thickness: Distance between uprights: mm Safety: Machine fuse Machine weight: 32,000 kg Height above floor: mm Ram dimensions: 1200 x 800 mm Number of strokes per minute: 30 Cushion force: 5 bar, 500 kN Cushion stroke: 150 mm Main motor: 25 HP Ram adjustment motor: HP

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Todpfx Ajuqdwxjdljf Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: new, pressure 20 t throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm Tedpfx Adexabrrjlof table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg range L-W-H 1310 x 1250 x 1860 mm

Condition: good (used), Year of construction: 1970, Data : Power 6 tons Stroke rate 220 / min Tedpfsxq R Absx Adljf Stroke adjustment 6 - 60 mm Projection approx. 120 mm Installation height without clamping plate approx. mm Table approx. 400 x 200 mm Weight approx. 0.3 tons Motor 0.7 HP

Condition: good (used), Manufacturer: WEINGARTEN Type: ER 125 Table size: 800x620 mm Tsdpfsn D Ebasx Adljf A small crack is visible on the load-bearing part of the press; it has been used this way for years. !!

Condition: used, ZDAS LUD BRAND DOUBLE UPRIGHT PRESS 500 TON (5310) Liquidation by auction due to end of operations and permanent closure of a pre-owned industrial machinery and tooling company NOMINAL FORCE: 500 metric tons CLAMPING FORCE: 100 metric tons CLAMP EJECTION FORCE: 12 metric tons UPPER EXTRACTOR FORCE: 8 metric tons Todpfjxzdgnjx Adlof LOWER EJECTOR FORCE: 19 metric tons RAM STROKE: 315 mm DISTANCE BETWEEN UPRIGHTS (B): 2500 mm RAM MOVEMENT: 130 mm UPPER EXTRACTOR STROKE: 90 mm CLAMP STROKE: 120 mm USABLE RAM CLAMPING AREA IXB: 2400 x 870 mm DIMENSIONS OF LOWER TABLE CLAMPING PLATE: 2490 x 950 mm / Actual size 2490 x 1300 mm THICKNESS OF CLAMPING PLATE (H2): 160 mm OPENING IN TABLE (OXP): 2298 x 700 mm EXTRACTOR CHUCK DIAMETER: MAIN ELECTRIC MOTOR POWER: 55 kW AIR CONSUMPTION PER CLUTCH ENGAGEMENT: 25 dm³ PRESS DIMENSIONS: LENGTH X WIDTH: 4325 x 2890 mm HEIGHT ABOVE/BELOW FLOOR: 5400 mm PRESS WEIGHT: 42,960 kg STROKES PER MINUTE (VARIABLE SPEED): 1 - 22 spm

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Tsdpeuqcxnefx Adlef Weight of machine approx.: 3,5 ton

Condition: new, pressure 10 t throat 160 mm stroke 0 - 40 mm table: 270 x 370 mm table: 100 mm - Bohrung Todpfjxaad Hox Adlsf no. of strokes 200 Hub/min bore 25,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 180 mm total power requirement 0,75 kW weight 590 kg range L-W-H 1.168 x 1.010 x 1.670 mm

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! Todpfxexq Rz Rj Adljf With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: used, (1366) DOUBLE UPRIGHT ECCENTRIC PRESS ZDAS MODEL LKDA-800 — TABLE 2500 x 1500 — GP 52 — STROKE 100 — 800 TON Liquidation by auction due to cessation of business activity and permanent closure of a used industrial machinery and tooling company Brand: ZDAS Model: LKDA 800/100 P Year of manufacture: 1993 Year of general overhaul: 2004 Frame: Double upright Number of cylinders: 2 Force (ton): 800 ton Stroke: 100 mm Shut height: 1150 mm Slide adjustment: 300 mm Table dimensions: 2200 x 1500 mm Todjxzc Ukspfx Adlof Slide dimensions: 2000 x 1500 mm Distance between uprights: 2,550 mm Side clearance: 1600 mm Safety fuse: Hydraulic Machine weight: 95,000 kg Machine dimensions: 9000 x 4000 x 2500 mm Height above floor level: 6600 mm Strokes per minute: 52 Cushion power: 7 MP Cushion stroke: 20 mm Main motor: 75 kW Slide motor: 5.5 kW

Condition: used, Year of construction: 1979, machine/vehicle number: 4941, Capacity: 75 ton Throat depth: 300 mm Ram stroke: 8 - 100 mm Slide adjustment: 60 mm Shut height (stroke down, adjustment up): 390 mm Table surface area : 700 x 600 mm Slide area: 400 x 270 mm Number of strokes: 120 s.p.m. Required power: 4 kW Dimensions L x W x H: mm Tedpfx Adsw Tukvsljf Weight of machine approx.: 3,5 ton Extended machine accessories Dreher roller feed model WAV-MD-2Z /1060 K-AMaterial width 210 mmMaterial thickness max. 1.5 mmMax. feeding speed 80 m/min.

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Tjdpfx Asuqc Enodlsf Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton Standard configuration the electric is new from 2015.

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Todpfx Adeuqc Hfjlof Extended machine accessories Press body can be tilt