Used Edge Contouring for sale (4,276)

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Codpfxelht H No Apherd Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg Csdpfxehqb Rco Apherd - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Crsdpfjv Sk Nnjx Aphod Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Cjdoxgvcxspfx Aphjrd Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2025, The Hebrock K 36 Top model with motorized adjustment - showroom model - new machine - - immediately available - This popular Hebrock model offers unparalleled possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By providing the option to equip the machine with a stepped milling cutter and a multi-radius draw knife, Hebrock sets new standards in the field of perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 minutes. Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed rate: approx. 15 m/min. Ready for operation: approx. 6 min. Max. power consumption: approx. 7.4 kW Csdpfx Apji Am Ukjhjrd Electrical connection: 400 V – 3-phase – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; edge trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue reservoir with replaceable reservoir preparation incl. glue outlet device, high-frequency double-motor trimming saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable milling cutter (combination version), corner rounding cutter, radius draw knife, flat draw knife (incl. pneumatic retracting device), finishing station, robust chain drive, ball-bearing double roller pressure, aggregate sight window from the rear of the machine and the operator side, signal lamp for workpiece sequence, extendable workpiece support, feed rate approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius draw knife 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25. Protective spray for edge 36/27 Nesting (1 milling station + 1 radius draw knife) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package with motorized adjustment for panel, edge thickness and rabbet milling depth Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius scraper blade, corner cutter, surface scraper blade, finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue outlet device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combined version), corner rounding cutter, radius scraper blade, surface scraper blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius scraper blade F5/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: In stock, 54634 Bitburg Available in calendar week: 4/2024 Cjdpfx Asi Anadophsrd

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: Cjdpfx Ajd R Ev Djphord • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Crodpfxey Iu N Aj Aphod Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, total length: 4,150 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Brandt-Homag KDF 220 Highflex edge banding machine, year of manufacture 2012 from a small carpentry business Last inspection: March 20, 2026 Type: KDF 220 Machine number: 0-261-20-6136 Wiring diagram number: 0-261-20-6136 Year of manufacture: 2012 Supply voltage: 400Y/230 Units controlled via the display Gluing unit: 2 x 2.2 kW Trimming saw unit: 2 x 0.18 kW Flush trimming unit: 2 x 0.27 kW Profiling milling unit: 2 x 0.35 kW WD 40 Codpszdb Ivsfx Apherd -additional function: structural base Radius draw knife Straight draw knife Edge thickness: 0.4 - 6 mm Fsbq Uvmsyy S Ade Rnjph Workpiece thickness: 8-60 mm Feed rate: 11 m/min Total power: 16 kW Length: 4150 mm If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Crsdpfxjy Dd Igj Aphod Location: Nattheim

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. Crsdpertn Nzefx Aphod A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit.

Condition: used, Year of construction: 1994, Belt height: 150 mm Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Csdszd Hngspfx Aphsrd Veneer sanding mechanism End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Belt direction: right/left Location: Nattheim

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Crsdpfx Apsyzxa Eshod Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit Cjdpfxjyrp Uao Aphord - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 Contour Measuring Machine Measuring range, horizontal X = 100 mm Measuring range, vertical Z = 50 mm Travel range, column Z2 = 350 mm Tilt +/- 45° Dimensions (W, D, H) 745 mm x 450 mm x 885 mm Csdpfezhuigsx Aphord Total weight approx. 150 kg Includes PC system Includes cross table 218-001 Includes rotary vise 2028-003 Further data can be found in the brochure (PDF).

Condition: used, Year of construction: 2006, operating hours: 67,130 h, machine/vehicle number: R77, Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph Credpfxewbhdao Aphed Upgrade in 2024, excellent condition and warranty on the replaced spare part Overview of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers advanced aseptic filling performance for dairy-based beverages and fruit juices. Originally, Tetra Pak manufactured this A3 FLEX 100V model in 2006. However, in 2024, the company upgraded it to the 100V version. As a result, the machine now complies with modern standards for process control, performance, and operational safety. Therefore, it remains a highly relevant and reliable option for current production needs. Packaging Format and Technical Configuration The Used Filling Machine A3 Flex supports the 1000 ml Edge format, a version of the Tetra Brik package that features an inclined top edge. Consequently, the design improves ergonomic handling and simplifies the application of screw caps. Furthermore, the system uses a single filling valve, which aligns with the standard architecture of A3 Flex machines. These machines perform the filling process vertically under aseptic conditions. In addition, the setup preserves a sterile environment throughout all stages: forming, filling, and sealing. Output Capacity and Operational Hours The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers a nominal output of 7000 packs per hour. Hence, it ranks among mid-to-high performance solutions in the aseptic filling sector for non-carbonated beverages. Over time, the machine has logged 67,130 working hours, which technicians can use as a key metric for technical assessment. Despite the machine’s age, its solid maintenance history and the 2024 upgrade ensure that it can continue operating effectively in demanding production environments. Product Applications and Hygienic Design The Used Filling Machine A3 Flex handles dairy and juice products with ease. Moreover, it meets all aseptic packaging requirements, including sterilization and hermetic sealing. The manufacturer built the internal circuits and filling chamber with stainless steel. As a result, the design enables efficient sanitation and ensures compatibility with clean-in-place (CIP) procedures. Additionally, the hygienic design aligns with current food safety standards for the beverage industry, thus making it suitable for sensitive applications. Integration and Control System of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex offers a compact footprint and a modular structure. Therefore, technicians can integrate it seamlessly into existing bottling lines. Alongside its structure, the machine includes a centralized HMI control panel. Operators use this interface to manage daily activities. Not only does it simplify the workflow, but it also allows for quick adjustments to production parameters or packaging formats. Conse...

Condition: good (used), Iseli EBW edge grinding machine. Csdpsd Ncg Ajfx Apherd

Condition: like new (used), Year of construction: 2013, IMA COMBIMA 2013 - 2x loading / unloading station - for PVC, ABS & solid wood edges Cedstxtkxopfx Apherd - U-form layout - with KFA 20 aggregate - immediately available For more Info, Video and technical specs, please contact us.

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) Crodpfx Apey Id Nlohsd - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Cedsy T S Rnepfx Apherd Description: - PIN code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg Crodpfx Apsziyvhjhsd

Condition: excellent (used), Preliminary milling cutters Gluing unit for cartridges Guillotine Edge trimming cutter (front and rear) Straight milling cutters Angle milling cutters Rounding profiling cutter Corner rounding Straight profiling cutter Dadoing saw Crsdpfxozik R Ao Aphed Polishing machine Year 2002

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Cedpfx Aoy Ruzqsphjrd

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips Crodpfor A Eq Rox Aphjd High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW Credporx S Ipsfx Aphjd - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.