Used Edm Machine Edm for sale (91,785)

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,240 mm, total length: 2,600 mm, total width: 2,810 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, empty load weight: 3,300 kg, warranty duration: 6 months, Charmilles Robofil 440 CCS Year of manufacture: 2010 Charmilles Millennium CNC control Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Complete system dimensions: 2,600 x 2,810 x 2,240 mm Total system weight: 3,300 kg Upon order, the machine will be cleaned and completely overhauled by us, and all functions will be tested. Upon request, we offer the following services: Hjdpfxjxlcqgo Ag Njfn - Commissioning of the machine at your site - 6-month warranty - Control system training - Accessories such as chiller and clamping devices

Condition: used, Year of construction: 2011, table length 900 mm table width 900 mm ampere 32 A Control MF 20 weight of the machine ca. 6 t Hfedpfx Asxf Nbfsg Njn dimensions of the machine ca. 2070x2850x2980 m

Year of construction: 2005, condition: ready for operation (used), This 3-axis Sodick AQ327l wire EDM machine was manufactured in 2005. Despite a permanent short circuit due to a defective circuit board, it includes replacement belts and has had its axis drives and controls replaced. Operated via a PC monitor, it comes with a repaired computer and SolidWorks software. Consider the opportunity to buy this Sodick AQ327l wire EDM machine. Contact us for more information about this machine. Hodpfx Agjxf N Nio Nsfn Application Types EDM

Condition: used, Year of construction: 2003, Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of working container: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filled weight: approx. 4200kg, control: AgieVision. Documentation available. Hfodpfxew T Rqlj Ag Nsn

Condition: used, Year of construction: 2017, X = 600 mm Y = 400 mm Z = 310 mm incl. cooler Hjdpfxswzu Hbj Ag Nefn

Condition: used, functionality: fully functional, Year of construction: 1999, machine/vehicle number: 1270, DISINTEGRATOR FOR SPARK ERODING BROKEN DRILLS AND TAPS - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm Hodpfx Aexniv Usg Nefn - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collet Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No. 1270

Condition: used, Year of construction: 2012, Wire EDM machine Mitsubishi BA 8, year 2012. Technical data available as PDF file. Hjdpfsxnqdysx Ag Njfn

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test the machine under power. The price is ex works, without disassembly. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 Model: MV4800 Operating hours: approx. 7,166 hrs Application type: EDM wire cutting Machine type: Wire EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Hfjdoxnxmcepfx Ag Nen Diameter over bed: 1,250 mm Diameter over carriage: 1,020 mm Workpiece diameter: 505 mm Max. table load: 3,000 kg Worktable Outer length: 1,080 mm Outer width: 780 mm Price significantly reduced.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg Hedpfxexggdms Ag Nefn The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services.

Condition: excellent (used), Year of construction: 2002, operating hours: 34,000 h, functionality: fully functional, Agie Excellence 2F, year 2002. Machine in excellent condition. Can be inspected at our premises in Semsales, Switzerland. Hfedpfx Aow N Tazeg Nen

Condition: good (used), Year of construction: 2008, operating hours: 16,000 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Work tank dimensions W x D: 1,264 x 973 mm Max. workpiece weight: 1,500 kg Distance floor to table surface: 1,000 mm Machine dimensions W x D x H: 2,100 x 2,800 x 2,350 mm Machine weight: 5,300 kg Travel of U and V axes: 770 x 520 mm Hfjdpfsxg Il Sox Ag Nsn

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 3000 mm Measurements depth 2000 mm Measurements height 2290 mm Machine weight 3200 kg Control Unit Brand MAKINO Model MGF Hfodsxdflkepfx Ag Non Main Drive Number of axis 3 Movement X-Axis Movement 300 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Workpiece Workpiece weight 500 kg This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Hfedpfswtd Edsx Ag Non

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Hsdpfx Aewt N Uqeg Njfn More pictures and data will follow shortly.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, High-Precision Wire EDM Machine AGIE Vertex 1 Year of manufacture: 2008 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): +/- 40 mm Taper cutting: Up to 3° at 80 mm height Available wire diameters: 0.05 mm to 0.2 mm Best achievable surface finish: Ra = 0.05 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg Including AGIEJOGGER handbox for convenient machine setup 15" LCD color display with lift-up keyboard and mouse AGIEVISION control Hfedpfx Agoxf Dwne Nen Including AGIESETUP 3D Including AGIEDUO dual-wire system for automatic switching between two wire diameters The machine is cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your site and provide training in control and machine operation.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey Hfsdpfx Agoxlchfs Njn MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: used, Year of construction: 2004, Travel path: X 500 mm Hfodow Emfdopfx Ag Nsn Y 350 mm Z 300 mm incl. cooler incl. large wire spools

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 2350 mm Measurements height 1680 mm Machine weight 2500 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 300 mm Workpiece Workpiece weight 500 kg Hfedpoxcztnefx Ag Njn Table Number of tslots 3 This 3-axis CHARMILLES Roboform 35 die-sinking EDM machine was manufactured in 2000. It features a stabilized cast iron machine bed, a C-axis with 360° rotation, and a maximum electrode weight of 50 kg. The machine offers X, Y, Z travel paths of 350 mm, 250 mm, and 300 mm respectively. Ideal for precision mold making with its robust construction and reliable performance. Contact us for more information about this machine. Application Types EDM

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600) Hsdpfx Agoxnx Ito Nefn

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading Hfsdpfx Agexf I D Es Non can be seen in good working condition year 2002

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2015 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): ±40 mm Max. taper: 3° at 80 mm height Includes F-Module, suitable for wire diameters from 0.02 mm to 0.2 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15” LCD color display with lifting keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Hedoxfvfwjpfx Ag Nsfn Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg The machine will be cleaned, completely overhauled, and thoroughly tested by our specialist technicians. We are happy to install the machine at your site and provide training for both control system operation and machine handling.

Condition: excellent (used), Year of construction: 2012, Offer very good flexo imprinting machine. Manufacturer is the company Sondermaschinenbau Oschersleben. Flexo machine 1 color. Very well maintained condition and ready for immediate use incl. various extras. Hedpfx Aeqmnfheg Nefn

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand MITSUBISHI Model 64 bit CNC Movement X-Axis Movement 525 Y-Axis Movement 400 Z-Axis Movement 450 Workpiece Workpiece weight 1000 kg Table Outer length 730 mm Outer width 630 mm Hsdpfxjxbihqj Ag Nefn This 3-axis die-sinking EDM machine manufactured in 2004 features a Mitsubishi 64-bit CNC control system and a powerful 70 Ampere generator. It has a travel range of 525 x 400 x 450 mm and includes a 20-fold electrode changer. The work table measures 730 x 630 mm with a load capacity of 1000 kg. Consider the opportunity to buy this OPS INGERSOLL Gantry 500. Contact us for more information about this machine. Application Types EDM

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises Hsdpfx Ageuuz Iio Njfn - Training on site - Cooling unit - Transportation - Clamping bar set

Year of construction: 2020, operating hours: 4,200 h, condition: ready for operation (used), General Data Measurements width 2680 mm Measurements depth 2790 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-WB Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Hfodpfx Asxbihwog Non Workpiece weight 1000 kg Media Power consumption 13 kVA Air pressure 0.5 – 0.7 MPa Additional Equipment Automatic Front Door Option 45° Die Guide: Max Taper Angle ±45° / 70 mm 30 kg Wire Feed Unit: Max Wire Weight 30 kg This 5-axis FANUC Robocut alpha iB600 wire EDM machine was manufactured in 2020. It features a maximum workpiece size of 1050 × 820 × 300 mm and can handle weights up to 1000 kg. The machine includes UV axis travel of 200 × 200 mm and a maximum taper angle of ±30°. Equipped with a FANUC 31i-WB controller, it offers precise control and efficient operation. If you are looking to get high-quality EDM capabilities, consider the FANUC Robocut alpha iB600 machine we have for sale. Contact us for more information. Application Types EDM