Used Edm Machine Edm for sale (91,787)

Year of construction: 2011, condition: good (used), Additional equipement not included. Hodpfx Agjpxnwzj Nofn

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P0050I553, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Hjdpfjv Iazljx Ag Nefn Max. workpiece weight: 500 kg Travel paths X-axis: 320 mm Y-axis: 220 mm U-axis: 120 mm V-axis: 120 mm Z-axis: 180 mm Rapid traverse X-axis: 900 mm/min Y-axis: 900 mm/min U-axis: 450 mm/min V-axis: 450 mm/min Z-axis: 900 mm/min MACHINE DETAILS Machine weight: 1.2 t Connected load: 13 kVA EQUIPMENT - Water bath machine - Automatic wire feeder - Many spare parts and wear parts

Condition: excellent (used), Year of construction: 2015, operating hours: 6,609 h, functionality: fully functional, machine/vehicle number: SL600Q-A0256, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, workpiece height (max.): 340 mm, workpiece width (max.): 800 mm, workpiece length (max.): 570 mm, TECHNICAL DETAILS Workpiece dimensions flushing: 800 mm x 570 mm x 340 mm Workpiece dimensions submerged: 800 mm x 570 mm x 280 mm Maximum workpiece weight: 1,000 kg Work table dimensions: 1,050 mm x 850 mm X-axis: 600 mm Y-axis: 400 mm Z-axis: 320 mm UV-axis: 120 mm x 120 mm Maximum cone angle: ±25° (for workpiece thickness 130 mm) Wire diameter: 0.1 - 0.3 mm Maximum wire speed: 420 mm/s Wire tension: 3 - 23 N Weight of wire spool: 8 kg Processing method: flushing, submerged Table height: 995 mm Dielectric tank External dimensions (W x D): 825 mm x 2,400 mm Weight (empty): 500 kg Tank capacity: 850 l Filtration method: 3 replaceable paper filters Ion exchanger: Ion exchange resin (18 liter type) MACHINE DETAILS Without accessories: 2,635 mm x 2,865 mm x 2,300 mm With accessories: 3,920 mm x 4,215 mm Machine weight: 4,500 kg Transport dimensions: 2,635 x 2,865 x 2,200 mm Hfedsvw Ag Aopfx Ag Non Operating hours: 67,181 h Cutting time: 6,609 h Air pressure: 0.5 MPa Air flow: 30 NL/min Power consumption: 13 kVA EQUIPMENT - Wire chopper (L-Cut) - Taper Flex 3D Optional extension: Solidworks and DemaCut can be purchased for an additional EUR 5,000.

Condition: excellent (used), Year of construction: 2018, operating hours: 21,250 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, table width: 840 mm, overall weight: 4,090 kg, table length: 640 mm, A Mitsubishi MV2400R is for sale. Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V-axis: +/- 75 mm Design: 4-sided frame table, hardened with automatic vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece size: max. 1050 x 820 x 305 mm Workpiece weight: max. 1500 kg Wire ¯: 0.1 to 0.3 mm for wire spool holder 10 kg Control: MITSUBISHI M800 with 19" full-touch monitor (including handheld pilot with configurable LCD monitor) Closed control loops Min. axis resolution 0.05 μm Generator: H-FS fine finishing generator Digital AE II Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Handheld pilot with configurable LCD monitor 20 kg wire station Angle Master Advance II Set Consumable parts box Ergolux lamp Corehold function Job planner Filter pump pressure sensor Operating data output Free software update as needed Hfsdpfx Agowlq Hlo Njn Digital electricity meter / filter pressure sensor Ethernet/DNC/FTP Automation ready McAfee AntiVirus embedded McAnywhere Service 3D CamMagic on board Machine weight: 4,090 kg Installation dimensions: 2687 x 3030 x 2150 mm Option: HIRSCHMANN clamping system (not included in price)

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 60 rpm, TECHNICAL DETAILS Travel X/Y/Z axes: 500 x 350 x 500 mm Max. workpiece dimensions (width x depth x height): 880 x 680 x 350 mm Max. workpiece weight: 800 kg Workpiece area Work tank type: Automatic lowering tank Internal tank dimensions: 1,090 x 730 x 490 mm Bath height: 0 - 390 mm Machine table Clamping surface: Grid plate with 50 mm hole grid Programmed brake position: yes Dimensions: 800 x 600 Integrated C-axis Indexing and rotation: Interpolation with X, Y and Z as well as spiral machining Speed: 60 rpm Max. working current: 72 A Electrode changer Automatic: integrated Electrode weight: 100 kg Hfodpfxevuqxbj Ag Njn Generator Type: AGIE IPG "Intelligent Power Generation" Best surface roughness Ra: 0.1 µm Dielectric unit Loading volume: 620 l Filter quality: 4 cartridges with 8 filter elements Cooling system: water/air heat exchanger Temperature control: ± 1 °C automatic MACHINE DETAILS System dimensions: 2,855 x 2,135 x 2,965 mm Distance floor - clamping height: 884 mm Net weight: approx. 3,900 kg Gross weight: approx. 5,500 kg Cooling System: water/air cooler for generator, control and dielectric Norms and guidelines Standards: Directive 89/336/CEE Electromagnetic compatibility

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM Hsdpfx Agowww Sxe Nsfn CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg C‑Axis: full rotation – ideal for rotary electrodes

Condition: excellent (used), workpiece weight (max.): 100 kg, travel distance X-axis: 200 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 2,015 mm, total length: 1,600 mm, total width: 1,750 mm, 2 units available. CNC controller: X-act SDS2 Axes X-axis travel mm: 200 Y-axis travel mm: 300 Z-axis travel mm: 300 C-axis degrees: 250 Worktable Maximum workpiece size (D x H) mm: 250x350x300 Max. workpiece weight kg: 100 Equipment Hfjdpfxju D Ap Uj Ag Njn MOS FET pulse generator 30 A max. Machining current Rated power kVA: 3.3 Basic machine dimensions / weight Length mm: 1600 Width mm: 1750 Height mm: 2015 Weight kg: 550

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Hodpfju Tq Hwex Ag Nofn Machine weight approx. 2600 kg.

Year of construction: 2020, condition: ready for operation (used), Movement Hfjdpjwmg T Rofx Ag Nen X-Axis Movement 350 Y-Axis Movement 250 Z-Axis Movement 250 This 5-axis +GF+ Agie Charmilles CUT E 350 was manufactured in 2020, featuring a work area of 820 × 680 × 250 mm and a maximum workpiece weight of 400 kg. It supports a cutting speed of 0 – 3 m/min and includes an Integrated Collision Protection System. If you are looking to get high quality wire EDM capabilities consider the +GF+ Agie Charmilles CUT E 350 machine we have for sale. Contact us for more information. Application Types EDM

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Hsdpfx Agoxfaqks Njfn Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Hfjdpfx Agevuqtfo Non Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: HU50610, Controller 15" touch screen with Windows Operation System Interface Table size 630 x 360 mm Dimension of tank LxWxH = 940 x 550 x 350 mm X travel 400 mm Y travel 300 mm Z travel 300 mm Distance between the table and chuck 100 ~ 400 mm Max weight of electrode 11/50 kgs Max weight of wpc on table 500 kgs Max Output power 50A Best surface quality of work 0,08 Ra Input power 10 kVA Dielectric capacity 300 litre Dimensions of the machine LxWxH = 1320 x 1380 x 2150 mm Weight 1450 kgs Accessories, features - No. of filters 3 pcs. - C axis (max loading 11 kg) - Dielectrictank - Machine mouths Hodpfjwktkkjx Ag Nsfn - Manuals - Handtools

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 4,985 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 800 mm, A DEMO machine from our TOOL SHOP in Sofia, Bulgaria. Table length: 640 mm Table width: 540 mm Maximum workpiece dimensions: 810 x 700 x 215 mm Travel distances (X / Y / Z): 400 x 300 x 220 mm V-axis: 120 mm U-axis: 120 mm Maximum workpiece weight: 500 kg Control: M800 D-CUBES Wire diameter: 0.1 - 0.3 mm Machine weight: approx. 3.1 t Space requirement: approx. 2.8 x 2.1 x 2.1 m Machine construction: Hybrid design Hfjdpfx Aew Ni Tqsg Nen Machine includes: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection for XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole detection - Easy 3D setup for workpiece position detection - 5 controlled axes, prepared for additional axes - PFC – Precise Finish Circuit - H-FS – Fine finishing mode - LLS – Long Life System - 10 kg wire station - 4-sided frame table, hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric Control M800 D-CUBES: - 19" full-touch monitor with gesture control - Hand pendant with configurable LCD display - Job planner including job interruption function

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2758, TECHNICAL DETAILS Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25 mm wire) Control unit: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC “ADVANCE Plus” Hfedpfx Ajwr Aclog Non Replacement of X and Y linear scales: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of current: Three-phase Input frequency: 50 Hz EQUIPMENT - ODS optical drive system - Direct drive motors for the X and Y axes - Linear scales on the X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening unit - Automatic wire cutter (for thicker wires) - Automatic hole detection - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC precision machining (Precise Finish Circuit) - LLS longevity system - 10 kg wire spool holder (reel) - U-shaped, hardened, segmented receiving table - Compressor dielectric (water cooling) - Preparation for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming with ESPERADVANCE interactive dialog system - Control unit prepared for receipt of 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld control device - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Year of construction: 2003, operating hours: 10,000 h, condition: ready for operation (used), General Data Measurements width 1513 mm Measurements depth 1685 mm Measurements height 1962 mm Machine weight 1500 kg Control Unit Brand BROTHER Model CNC-A50 Main Drive Number of axis 5 Movement X-Axis Movement 410 mm Y-Axis Movement 260 mm Z-Axis Movement 170 mm Workpiece Workpiece weight 350 kg This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine. Application Types EDM Hfodpjwm Spkjfx Ag Nsn

Condition: used, Year of construction: 2000, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 2,300 mm, total width: 2,200 mm, overall weight: 3,600 kg, For sale Agiecut Challenge 2 spark eraser. Specifications: Range of motion: X: 350 mm Y: 250 mm Z: 250 mm Controller: Agie Maximum workpiece weight: 250 kg Hfsdsvdyhqspfx Ag Njn Year of manufacture: 2000 Dimensions: Machine weight: 3600 kg Machine dimensions (H, W, D):2300x2200x2200

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,370 h, functionality: fully functional, machine/vehicle number: 592.100.023, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, table width: 400 mm, table length: 600 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-Y-Z travel paths: 350 x 250 x 300 mm X/Y axis speed: 6 m/min Z axis speed: 15 m/min Hsdpjvxrqtofx Ag Njfn Integrated C axis: ACURA-C Working area Working tank dimensions: 900 x 630 x 350 mm Dielectric unit content: 500 l Max. table dimensions: 600 x 400 mm Distance floor/table: 1,000 mm Min./Max. Distance between table and quill: 170 / 520 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Filling height: 0 - 290 mm Tool and electrode changer Electrode changer: 40 places Number of tools: 60 Generator type: ISPG Working current: max. 60 A Robot Easy ERE-009410 Base: Robot Easy UPC Max. transfer weight: 250 kg (for UPC pallets) Control: EROWA control and interface cable Control: Pneumatic chucks Gripper: RCS 5 Magazine plate: UPC with 4 positions (320 x 320 mm) Total weight: 1,500 kg Cooling Control cabinet: Integrated air/water heat exchanger Dielectric: Integrated dielectric/water heat exchanger Control Operating system: Windows XP Data input: 15" LCD color screen, mouse or touchscreen Software: AGIEVISION 5 or DPControl MACHINE DETAILS System dimensions: 1,410 x 2,460 x 2,660 mm System dimensions including robot: 2,600 x 2,500 x 2,700 mm Net weight without dielectric: 3,830 kg Space requirement: 3,400 x 4,400 mm Fire extinguishing system: Automatic CO2 fire extinguishing system Form 2000 Switch-on time: 100,549 h EDM hours: 41,371 h EQUIPMENT - Automatic CO2 fire extinguishing system Form 2000 - Robot Easy ERE-009410 with EROWA control, gripper RCS 5, and magazine plate UPC - MTS Gripper Link Rapid - Integrated air/water heat exchanger and dielectric/water heat exchanger - Without magnetic table

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units Hfedpfx Agjvvl Uao Non 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 921022, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, TECHNICAL DETAILS Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Taper pitch/height: ±30° / 220 mm Hfjdpfxev Ul I Dj Ag Nsn Machining type: Submerged technology Control system: Windows NT with 12" TFT screen, standard keyboard, and remote control Working area Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Bevel cut: max. ±30° / 220 mm Wire EDM system Wire EDM diameter: Ø 0.33 to 0.10 mm Diameter for Automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic rethreading: Ø 0.33 to 0.15 mm Dielectric Filter: 2 paper cartridges Dielectric temperature: ±1 °C Volume of ion exchange resin filling: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire shredder - Standard interfaces (PCMCIA, Ethernet, etc.)

Condition: used, Year of construction: 1975, Technical details: table length: 430 mm table width: 270 mm x-axis: 300 mm y-axis: 240 mm z-axis: 250 mm total power requirement: 2 kVA weight of the machine ca.: 0,72 t weight: Schaltschrank: ca. 200 kg space requirements of the machine approx.: L:0,9 x B:1,0 x H:2,1 m START HOLE EROSION MACHINE - size of cooling pond: 1000 x 510 x 900mm - incl. electric cabinet: 600 x 550 x 1400mm Machine is on sale as is, without been checked and will be sold as is! i.D. * Hfodpfx Aju Nu Elog Nen

Year of construction: 2007, condition: ready for operation (used), General Data Hfodpowl Rylsfx Ag Non Measurements width 1550 mm Measurements depth 1750 mm Measurements height 2300 mm Machine weight 2300 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 300 mm Workpiece Workpiece weight 500 kg Additional Equipment Tool Changer (C-axis): Optional – can support automatic tool changers Dielectric System Capacity: Approx. 400 liters This 3-axis CHARMILLES ROBOFORM 350 was manufactured in 2007. It features a CNC control with a graphical user interface and optional C-axis for tool changes. The machine accommodates workpieces up to 500 kg, with a dielectric system capacity of around 400 liters. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM 350 machine we have for sale. Contact us for more information about this machine. Application Types EDM

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Hfjdpfxev Tpnro Ag Nsn Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 1600 mm Measurements height 2858 mm Machine weight 4400 kg Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, it's ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information. Hfodpfx Ajwhr Iieg Nsn Application Types EDM

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand FANUC Model 310is-WA Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Workpiece X 1050 mm Workpiece Y 775 mmm Workpiece Z 300 mm Hfsdpfov Rr Rdex Ag Nen Additional Equipment Includes all accessories in the photos Includes digital documentation This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 2000 mm Measurements depth 1530 mm Measurements height 2106 mm Workpiece Workpiece weight 551 kg This Mitsubishi EA8 was manufactured in 2015. A robust die-sinking EDM machine, it features a spacious internal working tank (800 x 520 x 300 mm) and can handle a maximum workpiece weight of 551 kg. The table dimensions are 500x350mm, suitable for diverse machining tasks. For more information about this machine, please reach out to us. Application Types EDM Hfodpsw R E Itsfx Ag Non