Used Electric Drill Machine for sale (84,651)

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm throat 320 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Bcsdpfxoyfwzuo Abdow Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm Bcsdjyli Sfspfx Abdsw table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine xH: 0,73 x 0,56 x 0,22 m

Condition: good (used), Year of construction: 2004, bore capacity in steel (diameter) 28 mm throat 300 mm bore stroke 150 mm distance spindle /table 60-765 mm distance spindle/base plate 1.200 mm taper MK 3 threading M20/M24 column diameter 115 mm table-size 510 X 425 mm spindle turning speed - stepless 60 - 1:400 U/min total power requirement 1,4 kW weight of the machine ca. 350 Kg. dimensions of the machine ca. 1,9 x 0,6 x 0,9 m - Digital spindle speed display Bcjdpfxjwgi Evo Abdow - Foot switch - Thread cutting device - Left-right rotation - 2-speed motor

Condition: good (used), Year of construction: 1990, table length: 1,200 mm, table width: 400 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Bcsdeyfd Nfepfx Abdsw Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 50 mm throat 350 mm bore stroke 180 mm Bcsdpfx Ajygm Sxebdow thread capacity 35 M spindle taper MT 4 MK column diameter 150 mm bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Bedjyplz Repfx Abdecw Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: good (used), Friedrich Deckel FP 2 LB Toolroom Milling Machine The accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely stable base frame and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as those found in American V8 engines. The long travel of 800 mm is also advantageous in this application. Technical Specifications: Deckel Universal Milling Machine FP 2 LB Digital Display: 3-Axis Digital Display Heidenhain X-Axis Travel: 800 mm Y-Axis Travel: 300 mm Z-Axis Travel: 400 mm Tool Holder: SK 40, Drawbar Thread S 20 x 2 Milling Head Type: Vertical Milling Head Speed Range: 40 - 2000 rpm Number of Steps: 18 Table Type: Universal Swivel/Tilt Table (± 45° / ± 15°) Bodpfxsgyw S Tj Abdscw Table Clamping Area: 1000 x 520 mm T-Slot Size: 16 mm Vise 160 mm Power Consumption: 9.5 kVA Weight: Approx. 1900 kg Dimensions: Approx. 1570 x 1675 x 1850 Financing through our bank is also possible. komplett-konzept.leasingo.de Other Items - New and Used - can be found in our shop! International shipping costs on request!

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Bsdpfx Abswiucfedscw Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1971, Webo BR 35 V / 1250 Radial Drilling Machine Working Area Distance from spindle to column: smallest 280 mm / largest 1250 mm Distance from spindle or drilling distance to table top: smallest 0 mm / largest 900 mm Distance from spindle to base plate: smallest 200 mm / largest 1400 mm Drill diameter: smallest 860 mm / largest 2800 mm Swivel range: 2,200 mm / clamping diameter approx. 240 mm Bcodpfx Abjihfw Nsdew Clamping area: upper 650 x 500 mm / side 770 x 500 mm Drill spindle diameter 40/85 mm Speed: 30 - 1800 rpm Year of manufacture: 1971 For further technical data, please refer to the machine card. Item condition: used, immaculate, and well maintained. Auction items: Only the Webo BR 35 V / 1250 without the reversible clamp shown. This can be purchased individually or as a bundle in our other auctions. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more metalworking machines – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2012, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, load hours: 55,400 h, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request Bcedeylpy Aspfx Abdew terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2012, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, load hours: 55,800 h, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bcedoylpyvspfx Abdow

Year of construction: 1970, condition: good (used), Type / Model: BST 13 machine number: 37749 Bcedpfx Abefir T Uedjw drilling capacity: 13 mm spindle mount: MK 2 Speed range: 475 to 2,400 rpm Projection: 190 mm Table: 230 x 220 mm clamping surface: 165 x 170 mm height adjustment: 300 mm stroke: 100 mm Total connection: 0,45 kW Accessories/equipment: Multi-spindle drilling head ( 4-fold ) verm. Sigloch & Schrieder condition: good Footprint: 220 x 400 mm Weight: 80 kg Dimensions: 220 x 400 x 820 mm

Condition: new, Year of construction: 2026, Standard equipment: - Robust, high-quality, inclined rotation hood for easy reading of the speed - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control - Connection cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical interlock - Thermal overload protection - Emergency stop push button Weight in kg: 44 Motor power kW: 0.45 Single-phase 230 V Speed rpm: 250–3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Throat 220 mm - Column diameter 70 mm - Usable table surface (W x D) 300 x 250 mm - T-slot size: 2 slots, distance 100 mm, slot dimensions width 14/26 mm - Spindle taper B16 - Speed display: Digital - Drilling depth display: Scale - Drilling depth stop: Quick-adjust stop ring - Feed: Manual Option DRILLING PACKAGE 1 – Price: €272 – Vice [felix] 2.0 80 – Quick-release drill chuck B16 1–13 mm (accuracy 0.17 mm) - FACTORY WARRANTY: 3 years - Free delivery including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! Bedpfx Aoihipzebdecw CALL AND REQUEST A QUOTE!

Condition: excellent (used), Year of construction: 2012, operating hours: 79,000 h, functionality: fully functional, machine/vehicle number: 106648-11, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; delivery condition: FCA (machine location). Available machines: 5 units, identical process. Year of manufacture: 2001 - 2012 ===== Bcsdpfexzgraox Abdjw For technical data, please refer to the handout. All warranty rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sale to private individuals.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Bcsdpow Agqhofx Abdjw ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm Bodpfeylnpisx Abdscw • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 Bcodpfx Ajwywwysbdow - Control: Conventional - Motor power: 0.6kW - Spindle speed max.: 1600rpm - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. Bcjdpfx Absh Dpv Rjdsw New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 Bodpeihf Etsfx Abdscw The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 120 rpm, table length: 550 mm, table width: 320 mm, spindle mount: MK 2, total height: 1,500 mm, total length: 1,400 mm, total width: 2,100 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 3,000 rpm, drilling capacity: 75 mm, distance between stands: 600 mm, spindle motor power: 551 W, For sale is a Hauser brand coordinate drilling machine of type OP3 The machine is ready for use and fully functional Technical data: HAUSER OP3 coordinate drilling machine Table: 550 x 320 mm Bcjdovzrx Njpfx Abdew Longitudinal travel: X-axis 400 mm Cross travel: Y-axis 250 mm Vertical travel: Z-axis 400 mm Cone in the spindle: MK 2 Drilling capacity in steel: 20 mm Stroke of the drilling spindle Z-axis: 130 mm Bore diameter: max. 75 mm Distance from table to spindle: 600 mm Spindle speeds: infinitely variable: 120- 3000 rpm Feed rates: Drill spindle slide: Number (steps) 2, 0.03 mm/rev 0.06 mm/rev Spindle motor: 0.75 HP Machine weight: approx. 1500 kg Dimensions: 1400x1500x2100 Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), Year of construction: 1965, functionality: fully functional, throat depth: 930 mm, For sale is a Donau brand DR30 high-speed radial drilling machine. The machine is in good and fully functional condition. Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle mount: MK 3 Spindle speeds: Continuously variable approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Thrust: approx. 930 mm Boom swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with shut-off and reversing. Motorized boom height adjustment. Left-hand drilling control, hand and foot. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? Bcedpfx Abewal Hpsdew For further information or to contact us, visit our website.

Condition: used, total width: 1,000 mm, total length: 2,200 mm, total height: 2,500 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Control: Conventional - Motor power: 6.0kW - Drilling depth: 150mm - Spindle speed max.: 2650rpm - Model: iaalboormachine - Table width: 600mm - Table length: 1300mm - Drilling capacity: 32mm - Travel Y: 1000mm - Spindle diameter: 40mm - Travel Z: 600mm - Max. reach: 1000mm - Spindle speed min.: 30rpm - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information Bcodpfswnilxox Abdew VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Empty weight: 4.200 kg - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Drilling depth: 300mm - Spindle speed max.: 2800rpm - Digital readout: Yes Bodpfxswnifrs Abdocw - Tool holder: MK4 - Table width: 700mm - Table length: 1200mm - Travel X: 1200mm - Travel Y: 800mm - Travel Z: 715mm - Max. reach: 1300mm - Type digital: Phillips - Spindle speed min.: 45rpm - Transport weight [kg]: 4200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1998, Frame dowel and slot mortising machine by Hofmann HT 200 U with adjustable angle Special drilling machine for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and spindle drilling can be easily performed thanks to the rotating drilling unit. Motor with pole-changing switch, two speeds Bcodeyfta Tjpfx Abdsw Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via practical handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240 mm Line laser for precise workpiece positioning Drilling unit can rotate 65° to the left and right Pneumatic adjustment of working height, doweling possible on two levels without retooling Desired drilling heights can be set for each drilling level using a handwheel and digital counter. Level switching is pneumatic from the front. Cross adjustment approx. 320 mm, stepless or in 12 mm increments Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, placeable at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as front supports Mobile base Extraction port 80 mm 4 used but good drill bits: 9, 12, 16, 19 mm Few paint touch-ups, very good condition, see original photos A used tilting slot mortising machine in this condition is very rare. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are available for demonstration in our warehouse. See 'more offers from this vendor.'

Condition: used, Year of construction: 1998, - Year: 1998 - Documentation available: No - CE certificate present: No Bcodjych I Tepfx Abdjw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels