Used Electro Hydraulic Press for sale (27,062)

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Pedpfxjyxgr Re Aknjgr

Condition: ready for operation (used), Punching force: 3000kN, table surface: 2200x1600mm, clearance at maximum stroke position: 190mm, punching stroke, adjustable: 20-160mm, working height without punching pad: 1050mm, punching speed V (down): 63mm/s, V (up): 71mm/s, V (high pressure): 6,8mm/s, punching sliding table, usable area: 2200x1600mm, travel, constant: approx. 120mm, in/out travel time, adjustable: approx. 2s, voltage: 400V, phases: three-phase, frequency: 50Hz, rated current: 55A, upstream fuse: 80A, control voltage: 230/24V, rated power: 30kW, protection class: IP54, operating pressure: 6bar, weight: 18t, with hydraulic unit type 250, with documentation. An on-site inspection is possible. Pgsdpjzukrdofx Akner

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm Psdpfx Akszrppvsnsgr feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) Pgsdpfx Aeu Au U Tekner *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: used, Year of construction: 2015, machine/vehicle number: 1606.18, functionality: fully functional, pressing force: 163 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,400 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, inserting, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm ==== General Information - Manufacturer: HYMAG - Type: Hydraulic 4-Column Press - Model: HS 4 160-K3 - Machine Number: 1606.18 - Year of Construction: 2015 - Pressing Force: 163 T - Rated Force: 1,600 kN - Table Size (Working Area): 2,000 × 1,400 mm - Ram Plate Size: 2,000 × 1,400 mm - Table Height: 800 mm - Open Height: 1,300 mm - Stroke: 700 mm - Front Clearance: 2,010 mm - Side Clearance: 900 mm - Overall Height: 5,200 mm - Overall Width: 3,200 mm - Overall Depth: 2,400 mm - Total Weight: 28 T - Basement Required: No ==== Hydraulic Cylinder - Max. Working Pressure: 305 bar - Return Speed Downwards: 220 mm/s - Return Speed Upwards: 150 mm/s - Initial Pressing Speed: 45 mm/s ==== Hydraulics & Drive - Main Motor: 55 kW - Additional Hydraulics: 7.5 kW - Auxiliary Motor: 7.5 kW - Cooling Motor: 1.5 kW - Oil Tank: 600 l Pgodpszq Apgjfx Aknor - Drive Type Pump (Drive I): V30D115RKN - Drive Type Additional Hydraulics (Drive II): PGH3-2X/016 - Cooler Type: TFS/A-20-400 ==== Tooling - T-Slots: M20 according to DIN 650 ==== Control System - Valve Voltage: 24 V ==== Safety - Shear Pad Dampening - Maintenance Platform - Follow-Up Travel: 17 mm - Follow-Up Time: 90 ms - Safety Distance: 180 mm ==== Electrical Connection - Operating Voltage: 400 V - Main Motor Current Draw: 98 A - Auxiliary Motor Voltage: 400 V - Auxiliary Motor Current Draw: 15 A - Cooling Motor Voltage: 400 V - Cooling Motor Current Draw: 4 A ##### Application Areas: Forming, deep drawing, straightening, inserting, embossing, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-Column Press, 4-Column Press, Hydraulic Press, HYMAG, HYMAG HS 4 160-K3, 163 T Press, 163 Ton Press, Forming Press, Deep Drawing Press, Straightening Press, Inserting Press, Assembly Press, Industrial Press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these. Our core strength is in the design and construction of custom machinery and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket Pgsdpfoxabcwjx Aknjr - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, Year of construction: 2026, neu 2026 070240 Oktober 2026, Zwiswchenve Türkei 8300 € 160.19 € 1 100 to horizontal verschiebbar 300 mm 1070 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2430 mm 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH Pjdpfowirtzjx Aknjgr

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve Pjdpfx Akezkl Huonsgr - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: used, Year of construction: 1999, Hydraulic press Dunkes HEZ 100-40, year of manufacture 1999 Hydraulic press Dunkes HS2 63, year of manufacture 1999 Pgedpfx Aezu Arveknsr Eccentric press Ebu 75, year of manufacture 1985

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t Pgodox Uru Nepfx Aknsr dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), pressure 250 t Pgsdpfx Aoxcblwjkner passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, power: 26 kW (35.35 HP), pressing force: 230 t, stroke length: 470 mm, throat depth: 400 mm, clearance between the columns: 2,550 mm, total width: 3,750 mm, total height: 3,750 mm, overall weight: 16,200 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: DARLEY, Type: EHP-LS 230.31/25 Year of manufacture: 2003 Technical data Manufacturer: DARLEY Type: EHP-LS 230.31/25 Year of manufacture: 2003 Capacity: 230 t Usable length: 3,100 mm Distance between uprights: 2,550 mm Stroke: 470 mm Installation height: 700 mm Upright overhang: 400 mm Motor power: 26 kW Oil tank capacity: 200 liters Weight: 16.3 t Dimensions: Width 3,750 mm x Depth 2,700 mm x Height 3,550 mm (plus 200 mm for the control arm) Equipment • Control system: Delem DA-66W • Automatic Wila/Trumpf tool clamping system + tool holders (top and bottom) • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • CNC-controlled crowning • Lazersafe safety light curtain (front) • Rear safety guard via door/grille • 2 adjustable support arms Pjdpfx Aszmi Hqoknsgr • • Tool set: Top tool: straight, H 158 mm, R3, 28°, 100 t/m, 3000 mm, segmented Top tool: slightly bent, H220 mm, R1, 86°, 2000 mm, segmented All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1959, machine/vehicle number: 4501, hydraulic table press Podjzp Nxrjpfx Aknogr

Year of construction: 1994, condition: ready for operation (used), Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible. Pgedpfxonxk I Rj Aknsr

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Pgsdolyr Adepfx Aknsr

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg Psdpfxezp Ex Uj Aknogr ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Pedpelc N Ryjfx Aknogr

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Pgjdslc N R Djpfx Akner

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. Psdpfezv Nlxjx Aknogr The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Pgedpjxmr Rxefx Aknsr Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Pjdpovvkmbjfx Aknsgr Storage location: Nattheim

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Psdezucxcepfx Aknjgr Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: new, Year of construction: 2026, functionality: fully functional, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, control type: CNC control, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years Pgedpsxhc Spofx Akner EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Pgjdpfx Akei Amnpjnsr Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Pgedpfx Akozqzcronsr