Used Electronic Painting for sale (11,454)

Condition: used, This listing is for a Liebherr Hausgerate SN-ST 3910 Refrigerator The unit is in full working condition and is ready for immediate release The Liebherr LKv 3910 MediLine is a laboratory refrigerator designed to meet the stringent requirements of pharmaceutical and laboratory environments. It ensures efficient, Pharmacopoeia-compliant storage with precise temperature control and robust safety features. Key Features: Precise Temperature Control: The electronic controller with a digital display allows temperature adjustments between +3°C and +16°C, accurate to 0.1°C. Temperature Monitoring: The digital display continuously monitors internal temperatures, triggering visual and audible alarms for persistent over- or under-temperature conditions. The system records the last three alarms for review. Construction: The exterior is made of white painted steel, while the internal compartment is constructed from polystyrene (PS), ensuring durability and ease of cleaning. Iiodpfx Aexwcz Njciog Safety Features: A power failure warning light, temperature calibration capabilities, and a safety thermostat to prevent freezing enhance the reliability of the unit. Technical Specifications: Capacity: Gross/Net: 360 liters. Dimensions: Exterior (W x D x H): 600 x 620 x 1840 mm. Interior (W x D x H): 440 x 440 x 1630 mm. Shelving: Equipped with 5 adjustable shelves. Cooling System: Features an internal fan for uniform temperature distribution. Control Panel: Digital display for easy monitoring and adjustments. Alarms: Open door alarm. Visual and acoustic alarms for minimum and maximum temperature deviations. Adjustable alarm settings. Connectivity: Includes a dry contact and RS 485 interface for data monitoring and integration. Defrost: Automatic defrosting mechanism. Additional Features: Porthole for PT 100 sensor insertion. Insulation: 40 mm thickness for energy efficiency. Noise Level: Operates at 48 dB. Climate Class: SN-ST, suitable for ambient temperatures up to 43°C. Energy Consumption: 0.865 kWh/24h. Electrical Specifications: 220 - 240 V / 50 Hz with a connection rating of 1.5 A. Weight: 68 kg.

Condition: excellent (used), Year of construction: 2023, Schulz Schulz Electronic Power Test Cabinet with 8× Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023 For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. Isdpfjzix A Hox Acisig This system comes from a professional laboratory environment and is ideal for development, testing, burn-in, and automated test processes. Features & Functions: - 8 × independently usable laboratory power supplies SM330-AR-22 - Each unit offers precise voltage and current regulation - Sequence/automatic mode for complex test routines - Large control cabinet with: • Main switch • Start/Stop • Emergency stop • Side panels with optimal ventilation • Casters for easy transportation - Network labels present (e.g., CTSK05 #01 172.25.108.201) Technical Data: Control Cabinet (SE6607X-23BA0065-1): - Input: 400 VAC (three-phase) - Maximum current: 63 A - Total output: 8 × 3.3 kW = 26.4 kW - Protection rating: IP20 Power Supplies (Delta SM330-AR-22): - Output up to approx. 330 V / 22 A - High-resolution display - Fully programmable - Industrial grade – extremely reliable Condition: used The test cabinet is in very good condition. Displays are clear, controls clean, cabinet is solid. No visible damage. Scope of delivery: (see picture) - Complete Schulz Electronic test cabinet - 8 × Delta Elektronika SM330-AR-22 power supplies - Integrated control/operation section - Casters mounted (Technical specifications and details are subject to change and error!) If you have any further questions, we will gladly assist you by phone.

Year of construction: 2022, condition: used, machine/vehicle number: 22220001LWD, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Iijdpfjw Npywjx Aciog

Year of construction: 2021, condition: used, machine/vehicle number: 21095009LWD, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Iiodpfx Acow Npv Eoiog

Condition: new, Year of construction: 2009, operating hours: 3 h, Cold Jet Aero 80 – Machine for professional use. New price: €35,000. Excludes applicator nozzles and hoses. This machine is suitable for industrial cleaning, including large-scale projects. An advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most robust machines on the market and is in excellent condition. Cold Jet Aero 80 FP – Dry Ice Blasting Machine, complete with the following equipment: COLD JET Aero 80 FP (3 hours of operation) 1 x 20’ blasting hose 1 x air hose 1 x Coldjet applicator 2 x nozzles We have various new parts in stock for Cold Jet machines. This is one of the best machines in the world. It contains no electronics, which makes it reliable and cost-effective to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance of Cold Jet machines are also available. Worldwide shipping. Iodpfxjznnyxe Acioig Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up Iedpfx Acsy Tlc Deisig - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Year of construction: 2022, condition: used, machine/vehicle number: B2212/041, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Ijdpfxsym N Ipe Acioig

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,830 mm, controller manufacturer: KUKA, controller model: KRC4, The most popular robot series from KUKA, the KR 360 R2830 is sturdy, sleek, versatile, and outfitted with high performance features. Ijdjzl Sgkopfx Acioig The KUKA KR 360 R2830 robot has a repeatability of 0.05 mm. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR360 R2830 Condition: Used & Tested Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. As PLC Merkezi EOOD, we have more than 400 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; Iedpfx Aoygxc Aocijig - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 54 mm, turning diameter: 410 mm, center width: 950 mm, center height: 200 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, Equipment: documentation/manual, Dear Sir or Madam, Iijdpfxeyalulo Aciog We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 540-02 painting robot, serial number IRB0540-02-0087 The ABB Robotics IRB 540-02 (serial number IRB0540-02-0087) is a specialized 6-axis painting robot designed for precision applications such as coating plastic parts, electronic components, and furniture. It is known for its excellent surface quality and high process repeatability. Technical specifications: • Payload: 5 kg handling capacity • Number of axes: 6 • Robot weight: Approx. 240 kg • Mounting options: Floor or overhead mounting • System integration: Uses the S4P robot controller as standard and can be equipped with precision paint dispensing systems. Key advantages of the series: • High finish quality: Specifically calibrated for water-based, solvent-based, and powder coating processes. • Low material consumption: By integrating paint regulators and color change valves, overspray and paint waste can be drastically reduced. • Flexibility: Offers a large working area and a compact design, making it possible to coat even complex 3D geometries evenly. Iisdpfxozm Hmbs Acijg Used item – normal signs of wear. "Sample photo. The actual product may vary." Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Iodpoykqhfsfx Acijig Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Condition: used, Year of construction: 2015, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 210054, tank capacity: 225 l, usable tank capacity: 200 l, total length: 800 mm, total width: 1,600 mm, total height: 1,020 mm, inner diameter: 1,498 mm, overall weight: 315 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 50 mm, manhole location: front, reception height: 250 mm, discharge height: 250 mm, operating temperature: 300 °C, operating pressure: 20 bar, input voltage: 230 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, The Firex Easybratt 200L Gas Variant (BM1G200I) is a heavy-duty industrial tilting bratt pan engineered for bulk cooking, braising, shallow frying, and boiling. While marketed in the 200-liter chassis tier, its precise volumetric breakdown consists of a 225-liter total geometric capacity with a 170-to-200-liter usable working capacity. The comprehensive breakdown of dimensions, weight, and utilities sourced from the manufacturer's technical specifications includes: 📐 Physical Dimensions & Cooking Vessel Overall Width: 1600 mm Overall Depth: 900 mm Overall Unit Height: 1020 mm (with lid closed) Vessel Internal Width: 1498 mm Vessel Internal Depth: 564 mm Vessel Internal Height: 250 mm Cooking Surface Area: 84 dm² 🏋️ Weight & Construction Details: Net Weight: 315 kg. Pan Base Thickness: 10 mm to 15 mm high-thickness compound steel for balanced heat distribution. Chassis & Tank Material: High-grade AISI 304 stainless steel throughout. Tilting Mechanism: This is a motorized model; the suffix is BM1G200I. Iijdpfxjz Ad Stj Acisg Lid: Double-skinned, counterbalanced lid with spring loading to reduce heat loss and enable hands-free opening. 🔥 Gas & Burner Specifications: Total Gas Power: 40 kW. Burner Type: High-efficiency stainless steel multi-tube gas burners. Gas Connection Size: 1/2" inlet. Thermostatic Control: Micro-adjustable range between 45°C and 300°C Safety Features: Automated pilot valve safety shut-off; when the tank is tilted/lifted, burners drop down to a pilot-only mode and automatically re-ignite when lowered back into place. 🚰 Water & Electrical Supply Requirements Water Connection Size: 1/2" cold water inlet Water Supply Pressure: 50 to 300 kPa Water System: Integrated swivel water fill tap built into the top surface for automated pot filling and seamless cleaning. Electrical Feed: Requires a basic 230V / 1-phase supply solely to power the easy-light electronic ignition and internal control array.

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Isdpfxozumxme Acisig Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 06-04-04, For sale: Göpel Electronic PXI-LIN V1.1 LIN Controller Module (PXI 3071), in fully functional condition. Manufacturer: Göpel Electronic Model: PXI-LIN V1.1 (PXI 3071) Serial Number: SN: 06-04-04 Year of Manufacture: 2006 Condition: Used – Tested and Functional Interface: PXI Application: LIN bus controller for automotive test systems Connector: 25-pin D-Sub Iisdpjzn Htwjfx Aciog Fully tested and operational. Ideal for automotive LIN bus testing, restbus simulation, and ECU testing. Compatible with Göpel automotive testing software. Removed from a working industrial environment; no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. Iiedpfxewzl Hxs Acijg * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Iodpfx Ajzi D T Djcisig Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Condition: ready for operation (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200-2 COMP Payload: 200 kg Reach in mm : 2700 mm Condition: Used & Tested Year: 2007 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Iedpfx Ajzl Si Sjcieig Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: good (used), Automatic strapping machine Mosca RO-TRP-4 Features: - Can be integrated into any line - Direct transport system with frequency control, adjustable from 0.15 - 0.8 m/s - IFM Ecomat 100 control unit with display - Hot welding system with electronic heating control - Fully automatic strap threading system - Adjustable strapping distance via the control panel - Adjustable strap tension - Determination of the strap end with ejection of remnants - Automatic ejection of the strap rings in the event of incorrect strapping - Structure painted blue - RAL 5010 Iisdpfet Srxgex Acisg The opening is 74cm wide and 53cm high Strapping capacity: Up to 46 strappings / min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 KVA Weight: 300 kg. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027-60 KN - 90 KN or 120 KN also possible! BROACHING MACHINES MADE IN GERMANY. Note: The machine can also be offered and manufactured in a version with a pulling force of 90 KN (9 tons) or 120 KN (12 tons). ==> Information for manufacturing companies or dealers with their own production: If desired, the drawings, rights, spare parts, customer and prospect data, planning and manufacturing documents (including plans for a version with 9 tons of pulling force) for the broaching machine can be purchased from us. Please contact us if you are interested. ==> The new machines are manufactured by us on a project-specific basis after placing an order. Short-term production and delivery are possible. ==> Spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are currently available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaches for internal gearings, etc.) and accessories available. Please inquire separately. All broaching tools and tool holders from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly at our plant in Germany. Furthermore, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and all other required components - including electrical components). Vertical broaching machine Type SRM 2027 - NEW MACHINE: Iijdpfxouqbnhe Acijg 60 KN version: The main application is in the production of keyway grooves from 3-28 mm (and even larger) and profiles of similar dimensions. The compact and space-saving machine can therefore be successfully used in small, medium, and large companies. The low price justifies the purchase even for small series and individual production. The drive is via a pole-changing gearbox brake motor. The maintenance-free double spindle drive ensures smooth operation and a central pull point, as well as constant cutting performance. The free tool table allows large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be firmly clamped. Stroke adjustment is carried out by adjustable limit switches with stroke limitation. For short hubs/workpieces, several workpieces can be placed on top of each other. Broaching pins, mandrels, and spare parts available on request. Technical data: Pulling force: 60 KN at 3m/min, 40 KN at 6m/min. Broaching speed: 3m/min + 6m/min. (Optional: stepless speed adjustment (from 0 m/min to 6 m/min possible with extended electronics) Return speed: 6m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350 mm Table through-hole: 140 mm Weight: approx. 510 kg Floor area: 750 x 570 mm Overall machine height: 1510 mm Drive power: 3.7 / 4.4 KW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PELLET SANDER (€2000) With this machine, you can also use loose 3mm pellets! And of course, blocks. As good as new, 1-year warranty Includes hoses and nozzle. The COLD JET machine is suitable for industrial cleaning, both small and very large projects. The advantage of this machine is that it's not loaded with new-generation electronics. It's one of the most aggressive machines on the market. This machine is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Blasting complete with the following equipment: COLD JET i3 Microclean (12 HOURS OF USE) 1 x 20' blast hose 1 x Coldjet applicator 1 x nozzle We have various new parts in stock for Cold Jet machines. One of the best machines in the world. No electronics. That's why it's reliable. And it's inexpensive to maintain. For questions or to schedule a viewing, please contact DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance are available for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Isdpfx Acexga Tzeieig Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Iijdozxf Inepfx Acijg Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Condition: good (used), functionality: fully functional, mileage: 682,000 km, power: 353.04 kW (480.00 HP), first registration: 06/2018, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, car registration, central locking, compressor, fog lights, low noise, navigation system, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, spoiler, traction control, IVECO STRALIS MY2016 AS 440S46 EVO – CHASSIS WJMM62AT20C392089 – LICENSE PLATE GM579RZ YEAR 2018 – EURO 6 – 682,000 KM Color: SIGNAL BLUE (similar to RAL 5005) Cab: ACTIVE SPACE – STRALIS EVO Engine: CURSOR 11, 460 HP Tyres: size 315/60R22.5 STRUCTURE: Wheelbase 3,800 mm, Double Bunk, Rear Air Suspension, ZF 12-speed Transmission 12TX 2210 TD – Payload 9,700 kg – GVW 18,000 kg – Towing Capacity 3,570 kg TRUCK EQUIPMENT: Rear Air Suspension, ZF 12-speed Transmission – 12TX 2210 TD, Hydraulic Retarder, Parking Air Conditioner, Automatic Climate Control, Independent Air Heater, Electronic Brake System + Brake Assist System, AEBS (ABS+ASR) + BAS, ESP, Adaptive Cruise Control, Hi Cruise (Predictive GPS), Lane Departure Warning System (LDWS), Ecofleet, Hill Hold, IVECO Connect, Expansion Module, Pneumatic and Heated Driver’s Seat, Sun Visor, Roof Spoiler + Side Spoilers, Plastic Parts Painted to Match Cab Color, 80 L Heated AdBlue Tank, Immobilizer, Central Locking, Integrated Fog and Driving Lamps Iijdsykih Rjpfx Aciog BODYWORK: TRACTOR UNIT

Condition: used, mileage: 39,712 km, power: 121 kW (164.51 HP), first registration: 06/2024, fuel type: diesel, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 18, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1354. RR77105 ----EQUIPMENT * LED exterior light, high-mounted, downlight, rear * Paint: Metallic * Transmission: 6-speed manual * Anti-lock Braking System (ABS) with Electronic Brakeforce Distribution (EBD) - Electronic Stability Program (ESP) with Traction Control System (TCS) - Hill Start Assist - Crosswind Assist - Safety Brake Assist - Rollover protection - Emergency Brake Assist incl. emergency brake light Iiodpfx Acoziv U Tjisg * Airbag, driver side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, short arm - with integrated turn signals * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, high - incl. luggage compartment along the passenger compartment (overhead) * Roof, overhead storage compartment in the front * Headliner in the driver's cabin and in the passenger compartment * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper * Third brake light * Windows: Vent window, 4th row left and right * Windows: Sliding window 2nd row left * Power windows, front - with quick down/up function for driver's side * Parking brake, mechanical * Fire extinguisher - for passenger double seat in front of the seat - for passenger single seat next to the handbrake * Ford Easy Fuel - comfortable fuel filler flap and misfueling protection * FordPass Connect incl. live traffic information and WLAN hotspot 5G modem - Information on the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the FordPass app - Real-time traffic information (in conjunction with navigation system) - WLAN hotspot (up to 5 G/LTE, for up to 10 mobile devices) * Windshield, heated * Speed limiter 100 km/h - not switchable off * Glove compartment, additionally lockable * Interior lighting - additionally with reading lights in the front * Interior lighting: Passenger compartment lighting with delay function * Interior mirror * Air conditioning, front and rear - incl. water heater in the rear - incl. automatic climate control * Fuel tank 70 l * Steering wheel: Artificial leather steering wheel * Steering column, adjustable in height and reach * Package: Rear seat package 8 - 17/18 seater - 1st row: Double seat left with one ISOFIX bracket - 2nd row: Double seat left, single seat right - 3rd row: Double seat left, single seat right - 4th row: Double seat left, single seat right - 5th row: Four-seater row (double seat in the middle/single seats on the outside)) * Technology package 6P Exterior mirrors electrically adjustable, heated and automatically folding Blind Spot Assist incl. Cross Traffic Alert Audio system 3 LED downlight Pre-Collision Assist, camera and radar-based Rear parking assist Lane Keeping Assist incl. Lane Keeping Warning Traffic Sign Recognition System, extended Parking pilot system front/rear Cruise control - Navigation * Particle filter: Diesel particulate filter * Radio accessories: 12" multifunction display and Ford SYNC 4 communication and entertainment system with voice control as well as Bluetooth and USB interface - Integration of various telephone functions and hands-free system with voice control - SMS reading function with display in the multifunction display - Integration of storage media - Emergency call assistant - Ford Power-Up software updates - Support for Android Auto and Apple CarPla

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 031022140047, Year of construction: 2022, operating hours: 126 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, overall weight: 145 kg, laser power: 30 W, feed length X-axis: 130 mm, feed length Y-axis: 180 mm, feed length Z-axis: 330 mm, We are offering for sale a professional industrial SLS 3D printer, the Sinterit Lisa X, from our company's assets. The machine has been used very little, exclusively for development purposes, as evidenced by its total runtime of only 126 printing hours. The printer is in like-new condition, fully functional, and ready for immediate deployment in your production. Iedozyagzepfx Acioig Before the sale, the machine underwent a complete diagnostic check, software update, and professional service by an authorized partner. During this service, the printer received a significant hardware upgrade. The original wire-based powder deposition mechanism was replaced with a new and highly reliable system using a strip (so-called Recoater Strip retrofit) as part of the authorized intervention. This ensures maximum reliability and trouble-free operation. Furthermore, the seals of the printing chamber were replaced, the machine was professionally cleaned, the electronic contacts were treated, and the paint was restored. The machine has successfully completed a calibration print under load and is running on the latest firmware. Regarding the technical specifications, it utilizes Selective Laser Sintering (SLS) technology with a 30W IR laser. The printing speed reaches up to 14 mm/h, which is ideal for rapid prototyping and small-batch production. The printing volume is 130 x 180 x 330 mm for PA and PP materials and 130 x 180 x 340 mm for flexible materials. A major advantage is the open system of the Sinterit Studio Advanced software, which allows full support for third-party printing materials and access to dozens of printing parameters. As a huge bonus, we are including the available stock of printing powder completely free of charge with the printer. If interested, it is possible to purchase the complete set of accessories for subsequent processing of the prints (cleaning manipulator, sandblasting station, certified ATEX vacuum cleaner) after mutual agreement. We will be happy to provide you with more information, send you the complete machine specifications, or arrange a personal inspection.