Used Elumatec As 70 for sale (109)

Condition: excellent (used), Year of construction: 2008, Maximum cutting lenght : 3000 mm Minimum cutting length at 90° 350 mm Ibjdjxc Tyyepfx Ag Njc Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying WINDOWS 2000 Software

Year of construction: 2003, condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. profile height: 150 mm Ibsdpfew Tbqijx Ag Nsc Pneumatic material clamps Manual feed minimum quantity spraying Weight: approx. 200 kg

Year of construction: 2000, condition: defective spare-parts repository (used), functionality: unexamined, Elumatec SBZ 130 bar machining centre for sale as a parts donor. Offered as: untested, it may be non-functional. Please refer to the images (manual/nameplate) for the technical specifications. Inspection by appointment. Machine dimensions: Ibsdpsw Talxefx Ag Nsc 9000 mm × 2400 mm × 1420 mm (L × D × H) Control panel dimensions: 870 mm × 680 mm × 1570 mm (W × D × H)

Year of construction: 1985, condition: good (used), Offer 22556 Technical data: - Saw blade diameter 420 mm - saw blade bore 30 mm - max. cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - cutting range see diagram enclosed Ibedpfjimdlrjx Ag Noc - tilting range inwards manual 90 - 22,5 ° - inclination range inward manual 90 - 45 ° - Saw blade speed 2800 rpm - drive 380 V / 2 x 4000 Watt - Compressed air supply 7 bar - Air consumption per working cycle approx. 64 l - space requirement approx. W 4500 x H 1950 x D 1600 mm - weight approx. 1400 kg - with: - cutting length adjustment with positioning control - positioning control renewed approx. 2002 by WOLFF - saw unit swiveling and tilting for high and wide profiles, - as well as shift cuts

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1500050209, bar length: 12,000 mm, Bar machining center was purchased in 2022 as part of a partial business acquisition. For this purchase, an appraisal was prepared by the original owner. (Appraisal attached) The machine has hardly been used over the past three years as we have two other machining centers. Bar machining center ex works (can be dismantled and collected at any time) Ibedpoxlq Rbsfx Ag Noc

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Iedpfx Agerwlwvs Njbc Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1300030903, We offer on behalf of a client: elumatec AG, Profile Machining Centre SBZ 130 Description - 3-axis profile machining centre - Machining length 7.2 m without end-face machining - Machining length 7.08 m with end-face machining - 3-axis eluCam control system - Automatic clamp repositioning - 8 clamps with special island clamping management - 8-position tool changer with - Angle heads for lateral and end-face machining - 18.5" panel PC, USB ports and network connection - Handheld operating device - Light barrier - Small workbench Options - Pendulum processing - Automatic length measurement - Mobile operator terminal - 2 rotary angle heads 2 high-speed spindles, 15,000 rpm 1 high-speed spindle, 50,000 rpm Retrofitted in 2019: Ibodpexd Rvbjfx Ag Nec - 4 vertical spindles, 6,000 rpm - 4 tool holders BT 30 - 2 quick-release chucks for drills 1-13 mm - 2 collet chucks ER 32 for collets Ø2-20 mm - 1 BT 30 holder for disc milling cutter Additional information: - The protective screen was replaced in 2022 - The Windows PC at the operator terminal was replaced in 2020, so Windows 10 is available

Condition: ready for operation (used), Year of construction: 2005, CNC for profiles elumatec SBZ 122/30 from 2005. Equipped with a double-sided lateral unit for side machining. Five-position tool changer. Profile length measurement. Four clamps for profile fixing, positioned automatically. Photoelectric safety barrier during operation. Machine in good condition. Invoice. Ibedpfxsxmrate Ag Noc

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Elumatec KF 78/23 – 2-Spindle Copy Router Professional milling machine for aluminium, plastic, and light metal profiles Horizontal machining area (with stop): 300 × 100 mm Horizontal machining area (with copy template): 270 × 70 mm Horizontal travel: 80 mm Vertical machining area (with stop): 290 × 100 mm Vertical machining area (with copy template): 230 × 70 mm Vertical travel: 120 mm Spindle speed: 12,000 rpm Profile clamping range: 150 × 150 mm Motor power: 0.74 kW Power supply: 230 / 400 V, 3-phase, 50 Hz Compressed air connection: 7 bar Air consumption per cycle: approx. 12 l (without cooling), 24 l (with spray operation) Machine dimensions (L × W × H): 940 × 1,150 × 1,600 mm Weight: approx. 260 kg Ibodpfx Aoxl Hp Tsg Noc

Year of construction: 1994, condition: used, machine/vehicle number: 20542, Lg.no. 24238 Ibjdpfxoviuk Re Ag Nec Technical data: - Pressure capacity at 10 bar 60 kn - Plunger stroke 40 mm - Projection 100 mm - Installation height approx. 140 mm - Table size approx. 280 x 200 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 800 x H 1450 x D 1000 mm - Weight approx. 160 kg - with: - Foot pedal - original machine base frame - Pressure gauge + pressure regulator - Round shuttle table for 6 punching tools - Various punching tools

Condition: excellent (used), Year of construction: 2015, operating hours: 20,223 h, functionality: fully functional, machine/vehicle number: 1500050376, travel distance X-axis: 7,520 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 300 mm, controller model: eluCam, spindle speed (max.): 24,000 rpm, operating hours of spindle: 3,040 h, spindle motor power: 15,000 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, SBZ 150 Profile Machining Center 7.3 m 5-Axis CNC eluCam Year of manufacture: 2015 8 clamping devices Automatic length measurement on both sides Indexing unit with clamping carriage, software version Complete tool set (HSK-63F) including two saw blades D=400 mm + D=180 mm Ibodpfx Ajw Rcdlog Nsc Machine is in excellent condition and immediately ready for operation Machine is ready for collection in a 40' HiCube sea container and can be inspected at any time by appointment

Condition: like new (used), Year of construction: 2016, operating hours: 22 h, functionality: fully functional, saw blade diameter: 500 mm, Elumatec Double Mitre Saw DG 142 with E580/1 Control – Precision Saw for Aluminium and PVC Profiles For sale is a high-quality Elumatec DG 142 double mitre saw equipped with electronic control system E580/1. This machine is ideal for the precise cutting of aluminium, PVC, and light metal profiles – particularly suited for window, door, and façade construction. Technical specifications: Isdsw D Rv Depfx Ag Nobc Manufacturer: Elumatec Model: DG 142 Control: E580/1 (automatic positioning and angle adjustment) Mitre cuts: 45° – 90° (automatically adjustable) Cutting length: up to approx. 5,000 mm (depending on configuration) Blade diameter: approx. 500 mm Speed: approx. 2,800 rpm Connection: 400 V / three-phase Condition: used, technically flawless Availability: immediate +++ Operating hours: 22 HRS +++ Special features: - Automatic positioning of both saw units - Precise and clean cuts thanks to stable machine guidance - Programmable control for highly repeatable series cuts - Excellent cutting quality, also on demanding profiles - Ideal for metal fabrication, window production, and conservatory construction The machine is network-capable incl. extraction unit + SICK light curtain

Condition: used, Year of construction: 1999, gebraucht 1999 6173 Deutschland 11900 € Ibjdpfx Agewirfde Njc 1 10700 € 500 mm 2800 U/Min Rund 180 mm, Quadratprofi Rund 120 mm, Quadratprofi 1100 mm 1450 mm 1350 mm 490 kg hydropneumatic saw feed new HM saw blade pneumatic material clamping device vertical automatically opening protective cover Discharge roller conveyor with stop and measuring system, display E 110, 1/10mm, 4.5 m long, plastic rollers b = 250 x Ø 50mm, pneum. clamping, handwheel drive and locking in the operator area, stop can be folded up user manual in GERMAN COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Year of construction: 1999, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Iedpfxew Dplks Ag Nobc Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-hand operation 800 kg

Condition: excellent (used), Punch St 225 Hydropneumatic, air consumption 9l/per stroke Ibodpfjt Sigzsx Ag Njc Ram stroke 30 mm Punch pressure 3600 Kp at 6 bar 6000 Kp at 10 bar Pressure ratio 1:6 Foot switch Projection 100 mm, table surface 280 x 200 mm Weight 60 kg

Year of construction: 2006, condition: ready for operation (used), Smallest cutting length at 90°: 350mm, smallest cutting length at 45° inclined: 350mm, swiveling range inward: 90-45° (down to 22.5° manually with digital display), tilting range inward pneumatically: 90-45°, saw blade diameter: 420mm, saw blade speed: 2800/min, electrical connection: 230/400, power output per motor: 4kW, compressed air connection: 7bar, air consumption per working cycle: 40l without spraying, 64l with spraying, length: 4380mm, width: 2871mm, height: 1985mm. With complete documentation, without accessories. An on-site inspection is possible, but not under power. The machine is already dismantled and ready for loading. No defects known, was regularly maintained by the manufacturer. Iedpfsw Tc Shex Ag Nsbc

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps Ibjdpot Ea Tfsfx Ag Nec - SK30 tool holder - 2-layer machining

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Ibedpfjuiy Ngox Ag Njc Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: like new (used), Year of construction: 2003, functionality: fully functional, cutting length (max.): 6,000 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 500 mm, saw blade diameter: 550 mm, pivoting range: 45 °, Brand new machine - never used! TECHNICAL DETAILS Maximum cutting length: 6,000 mm Minimum cutting length at 90°: 375 mm Minimum cutting length at 45° (inclined): 375 mm Ijdpfxev Rf Uvo Ag Nsbc Saw blade diameter: 550 mm Saw blade speed: 2,250 rpm Inward tilt range (pneumatic): 90° - 45° Manual tilt range: up to 22.5° inward and up to 140° outward (with digital display) Inward tilt range (pneumatic): 90° - 45° Feed and connections X-axis feed length: 5,000 mm Y-axis feed length: 500 mm Input voltage: 400 V Compressed air connection: 7 bar Motor power per unit: 4 kW MACHINES DETAILS Total width: 1,350 mm Total height: 1,550 mm Total weight: 1,850 kg EQUIPMENT - 2 additional heads included (4 heads included in total) - Bottom cutting possible for precise cuts - Pivoting and tilting saw units; intermediate angle manually adjustable - Includes cutting/excess length module, protective covers, and pulsed coolant system

Year of construction: 2008, condition: used, Saw blade diameter: 420 mm Max. cutting length: 6,000 mm Min. cutting length: 335 mm Automatic length positioning and angle adjustment via E 555 control with Windows and USB connection Motorized angle adjustment for swiveling both saw heads Iedpfx Agsw Axmbe Nebc Moving roller conveyor Minimum quantity spray device Weight: approx. 1800 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. Isdpfxswwau Nj Ag Nebc 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Isdpfx Aow Syzqsg Nsbc Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Ibjdpjuiy Nyjfx Ag Nec Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-way tool changer for aluminum, PVC or steel profiles Max. processing length: 7200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Iodpfxeu T Nm Ns Ag Nsbc E 500 control Speed infinitely adjustable up to 6,000 rpm minimum quantity spraying 2 angle heads High-speed spindle clamp detection and displacement 8 pneumatic material clamps Pendulum operation possible through 2 light barrier areas Loading included in the price Weight: approx. 5,000 kg

Year of construction: 2007, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm E 500 control Speed infinitely adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection Iedpfew Axfqjx Ag Nobc 8 pneumatic material clamps Light barrier