Used Elumatec Slk 118 for sale (143)

Year of construction: 2005, condition: used, functionality: fully functional, machine/vehicle number: 1223030045, elumatec SBZ 122/30 profile machining centre, 3-axis controlled, machining length 3,850 mm - 2 tool magazines - 2 mitre heads - profile length measurement - 4 pneumatic clamps - automatic clamping adjustment - manual control panel Itedpfx Acezgv Hwopen - E550 control unit - spindle with 6 kW power - light curtain safety system Video of the machine in operation available upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Excellent technical condition of machine. Ijdpszzxpksfx Acpjtn

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Itedpjy Ah Tkefx Acpsn Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: excellent (used), Year of construction: 2011, The machine in a very good condition. 7,6 meters long, 2 working places. Possible to give a warranty up to 6 month. Isdpfx Aceyia Ezjpjtn

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Itedpfszzw Edex Acpon Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: excellent (used), Year of construction: 2022, operating hours: 52 h, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, Do ekonomicznej i wydajnej obróbki profili z aluminium, tworzywa sztucznego i cienkościennych profili stalowych Wszystkie procesy obróbcze jak frezowanie, wiercenie i gwintowanie odbywają się na nieruchomym profilu, dzięki czemu powierzchnia profilu jest chroniona Lepsze wyniki pracy dzięki zastosowaniu inteligentnej techniki sterowania Szybkie pozycjonowanie zespołu obróbczego z prędkością sięgającą 60 m/min dzięki zastosowaniu dynamicznych serwonapędów Gwintowanie bez uchwytu kompensacyjnego Automatyczne rozpoznawanie zacisków i pozycjonowanie Automatyczny magazyn narzędzi z czterema półkami na narzędzia (bez narzędzi) Nowoczesne, 3-osiowe sterowanie Ergonomiczna praca dzięki zastosowaniu nowoczesnego łoża pochyłego Brak konieczności wykonywania ruchu referencyjnego osi dzięki zastosowaniu systemów opartych na enkoderach absolutnych Unikanie kolizji dzięki automatycznemu rozpoznawaniu zacisków i pozycjonowaniu Silnik frezarki Power-Torque z zamkniętym układem regulacji obrotów zapewnia krótki czas rozruchu i wyhamowania wrzeciona Certyfikowana, zintegrowane z napędem funkcje bezpieczeństwa Niskie zużycie prądu dzięki zastosowaniu inteligentnej techniki sterowania Większa efektywność energetyczna dzięki połączeniu napędów osi pomiędzy obwodami Awaryjne zasilanie elektryczne (UPS) System operacyjny Windows Panel PC 15,6", procesor i3, przyłącza USB oraz złącze sieciowe Łatwe i wygodne wprowadzanie programów za pomocą eluCam na panelu operatora również w czasie obróbki Zdalna konserwacja online Wyposażenie maszyny Chłodzone powietrzem wrzeciono frezu 8 kW, S1 Kabina do ochrony operatora Cztery poziome dociski pneumatyczne do mocowania materiału Ogranicznik materiału, po lewej stronie Uchwyt narzędzi HSK-F63 Smarowanie ilością minimalną Wysokowydajny płyn chłodzący Ręczny pulpit sterowniczy Szablon głębokości Ijdpfxswgmyqs Acpjtn Opcje Narzędzia Uchwyty narzędzi Automatyczny magazyn narzędzi do maks. czterech narzędzi standardowych Automatyczny magazyn narzędzi do głowicy kątowej Obrotowa głowica kątowa HSK-F63 na dwa narzędzia Urządzenie chłodzące Green-line do szafy sterowniczej z obniżonym zużyciem energii Czytnik kodów kreskowych Kabina ochronna, opcjonalnie z zamknięciem dookoła Standardowo cztery zaciski. Możliwe jest rozszerzenie do ośmiu zacisków Prawy referencyjny ogranicznik materiału do przykładania elementów z obróbką nadmiarowych długości Dodatkowy ogranicznik do obróbki nadmiarowych długości po lewej stronie Obustronny pomiar długości Zacisk podwójny oraz dodatkowe akcesoria po złożeniu zapytania Panel PC 18,5", procesor i5 Panel PC 21,6", procesor i7 Uchwyt na notatki Osłona dźwiękochłonna Utylizacja wiórów z wykorzystaniem wanien na wióry

Year of construction: 2001, condition: used, Max. drum length: 7,500 mm Max. saw blade diameter: 550 mm Control E 550 Swiveling inside and outside motorized up to 140 degrees at both units (3-axis machine) Pneumatic tilting of the angle between 45 and 90 degrees with digital angle display Minimum quantity spray device Iedpfx Aezzmixocpjtn Machine is loaded free

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode Itodpfxex E Rd Ds Acpjn In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request Itjdpfx Aswwtw Dscpsn

Condition: used, Year of construction: 2013, We are offering for sale a two-head Elumatec ZS 720/00 LV welding machine, manufactured in 2005, designed for welding PVC profiles for the production of windows, doors, and frames. The two-head configuration allows for the simultaneous welding of two corners of the frame, ensuring precise processing and good productivity. The machine is characterized by its robust Elumatec construction and is suitable for professional use in companies that manufacture PVC window and door frames. Itsdpfx Acozmhuaepjn Technical specifications: Manufacturer: Elumatec Model: ZS 720/00 LV Year of manufacture: 2005 Type: two-head welding machine Application: welding of PVC profiles Electrical supply: 3/N/PE – 380/400 V Frequency: 50/60 Hz Installed power: 5.2 kW Operating pressure: 7 bar CE marking Made in Germany The machine is used and is available at our location in Termini Imerese, Palermo. It can be viewed by appointment. Additional photographs, technical information, and videos can be provided upon request.

Year of construction: 2008, condition: good (used), machine/vehicle number: 0733337043, Offer 26310 Technical data: Itodpfx Aez Iyz Ejcpsn - Saw blade diameter 380 mm - Miter adjustment 45° - 90° - 45° - Automatic saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 3 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1500 x D 900 mm - Weight approx. 300 kg - Outfeed roller conveyor with stop, adjustable via handwheel + digital display 3000 mm - Infeed roller conveyor 6000 mm

Condition: used, Year of construction: 1993, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Itsdpez Hx Ibsfx Acpsn Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Itsdpfx Aswwau Njcpen Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2007, condition: ready for operation (used), Itjdpfxjyt E D Tj Acpon

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: Itsdpfozxc Swjx Acpsn - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Ijdpfxow A Rv Ij Acpstn Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Complete external and internal corner machining. Support table. Itodpey U Rbnefx Acpsn

Year of construction: 2010, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control Windows XP with Elusoft Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle Right-angle gearbox with saw blade diameter up to 254 mm (only 90° cuts possible) Tensioner detection and automatic displacement 8 pneumatic material clamps Iedpozx D Ruofx Acpetn Oscillating operation possible Photoelectric sensors

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Itodezbb Rropfx Acpon

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type Itsdpfjyv H Tiex Acpsn • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1420099235, Ideal machine for high-volume series production when cutting at 90° and 45° Equipped with E 111 digital display and handwheel adjustment. Vertical pneumatic material clamping unit Cutting length variant 3,000 mm Tilting range pneumatically from 90° to 45° Saw blade diameter 500 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Ijdpszx Eqcjfx Acpotn Power output 4 kW Compressed air supply 7 bar

Year of construction: 2014, condition: good (used), The Elumatec SBZ 130 is a 3-axis profile machining center designed for efficient processing of aluminum, steel, and stainless steel profiles. All operations, such as milling, drilling, and threading, are performed on a stationary profile, which protects its surface. - Axes: 3-axis control, with a tool spindle as an additional axis. - Machining length (X-axis): 7200 mm - Travel (Y-axis): standard 485 mm (Vmax. 60 m/min) - Travel (Z-axis): standard 340 mm (Vmax. 60 m/min) - Spindle speed: standard 6000 rpm, optional high-speed spindle (18,000 rpm) - Spindle power: 5.5 kW - Tool magazine: integrated revolving tool head for 8 tools or 4 angled heads, ensuring short tool change times - Control: Windows operating system with eluCam software; 18.5" PC panel, with USB ports and network connection - Clamping system: automatic positioning of pneumatic clamps - Compressed air supply: 7 bar Itsdpfx Aeyt H Uyocpen MACHINE: Prepared tooling dedicated to PVC and steel processing: - Tool holders, - Reducer for steel processing, - Special tools with chip breakers, - Dedicated programs for processing door profiles. The head was replaced in 2025.

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Machine no.: 20 192 Voltage: 230/400 V Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Operating pressure max.: 8 bar Isdpjy D I R Sjfx Acpetn If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Excellent technical condition of machine. Itsdpfjwltqasx Acpjn

Year of construction: 2005, condition: used, CNC Machining Center Elumatec SBZ 122, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, highly regarded for its machining precision and operational continuity. Main features: - 3-axis CNC machining center - High-rigidity steel frame - Vertical spindle for milling, drilling, and complex operations - Worktable with pneumatic vices for stable and precise clamping - Long-travel longitudinal axis, ideal for processing profiles of considerable length - Protective enclosure with chip conveyor - Elumatec CNC control unit - Ideal for medium to high production and repetitive operations Applications: - Milling - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Key data: - Manufacturer: Elumatec - Model: SBZ 122 - Year of manufacture: 2005 - Condition: Used Condition: - Machine in good overall condition - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete workbench - Pneumatic clamping system Itsdpeyg Ht Aofx Acpsn - Control panel - Original covers and safety guards