Used Emco Maxxmill 500 for sale (140)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R2AP3901, turning length: 700 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, total height: 1,940 mm, total length: 1,980 mm, total width: 2,630 mm, TECHNICAL DETAILS Working Area Swing diameter over bed: Ø430 mm Distance between centers with standard tailstock: 700 mm Maximum turning diameter: Ø220 mm Maximum workpiece length: 510 mm Maximum bar capacity: Ø45 mm Cross-slide travel X: 160 mm Cross-slide travel Z with manual tailstock: 310 mm Main Spindle Spindle mount according to DIN 55026: A5 Spindle outer diameter at front bearing: Ø80 mm Solid clamping cylinder with drawbar for chuck parts up to: Ø165 mm Hollow clamping cylinder with draw tube max. through-hole: Ø45 mm Maximum chuck size: Ø160 mm Main Spindle Drive AC motor, power (100% / 40% duty cycle) with integrated holding brake: 9 / 13 kW Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotary Axis) Rotary axis resolution: 0.001° Rapid traverse: 100 rpm Feed Drives AC motors for X and Z axis feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position scatter Ps according to VDI 3441 in X/Z: 3 / 5 µm Tool System Disk turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations: 12 Turret indexing time: 0.14 s Standard Tailstock Travel: 460 mm Pedpfxowxw Aas Ah Ujrf Quill stroke: 120 mm Quill diameter: Ø60 mm Internal taper for live center: MT4 Quill thrust: 5,000 N MACHINE DETAILS Footprint: 2.63 m x 1.98 m x 1.94 m Space requirement: 3.0 x 1.92 m Height: 1.88 m Weight: 3.8 t

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: A8EW4982, turning diameter: 250 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, controller model: Sinumerik Operate, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 100 mm Z-axis travel: 300 mm C-axis for main spindle: available Podpfxjv Dlr Ie Ah Ujrf C-axis speed: 0 - 1,000 rpm Main drive power: 5.5 kW Main drive speed: 60 - 6,300 rpm Tool turret: 12-way VDI16 Driven tools: 6 pieces Driven tool speed: 200 - 6,000 rpm Driven tool power: 1.2 kW Max. finished part length: 120 mm Max. finished part diameter: 25 mm Max. finished part weight: 0.5 kg EQUIPMENT - Coolant system - Pneumatic hollow clamping cylinder - Pneumatic tailstock - Full enclosure - Central lubrication - WinNC for Sinumerik Operate -I/M - Machine license M.M - SINUMERIK Operate key module - MOC: Integrated PC with 12" color display, keyboard and mouse - Safety devices in accordance with CE - Various tool holders (radial tool holder M4 (2x), radial tool holder M3 (1x), collet holder ESX 16 (2x), set of collets ESX 16 (1x), indexable insert drill holder Ø16 mm (1x), boring bar holder Ø10 mm (1x), radial angle milling holder 90° (1x), axial milling holder straight (1x)) - Various clamping systems (RÖHM power chuck KFD #HS 895/3 with 926 mm through-hole, 1 set of soft top jaws (432 095) with 1/16" × 90° serration, set of hard reversible jaws 95/3, collet chuck 385E / 5C including draw tube (A8Z 150 010) for draw collets 385E / 842 / 5C Ø2 - 25.5 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: F4N K5 105, Emco FB5; year of manufacture 1997; accessories: sub-spindle head + approx. 10 pcs SK 40 tool holders; Prototrac control Prodpfxexqf Ewj Ah Uef

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 Pedpfx Aexp Iyhoh Ujrf A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal Tool Milling Machine Emco Emcomat FB-450 Linear with Position Indicator – Near-Mint Condition, CE-Compliant!! Technical Data: >> Year of manufacture: 2013 | Machine No.: F9A124962 >> Milling table clamping surface: 800 x 400 mm T-slots: 8 Slot width: 14 H8 Psdpfx Aowycv Ieh Uerf Slot spacing: 50 mm Maximum load: 150 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rates: 10–5000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 10 kW >> Spindle brake >> Technical documentation, spare parts plans, operating manual included >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head >> Rotary table >> Machine vice >> Steady rest About the Machine: For sale is a Universal Tool Milling Machine Emco Emcomat FB-450 Linear with position display, in near-mint condition. The machine comes from a government operation and was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal operation. Conversion from vertical to horizontal mode is very simple due to the tilting vertical head. The Emco has been mechanically and electrically tested in our workshop. Take advantage of the opportunity to inspect and test the machine under power at our facility.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,261 h, functionality: fully functional, machine/vehicle number: M-077.084.07, empty load weight: 4,800 kg, Equipment: chip conveyor, MACHINE DETAILS Weight: 4,800 kg Operating Hours Spindle hours: 11,261 h Control system on hours: 125,668 h EQUIPMENT Conveyor belt (FAMUP 405-1498-1, 352 kg) Pedpjxpvwzofx Ah Ujrf

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: R2EV3502, turning length: 310 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, total length: 1,630 mm, total width: 2,250 mm, overall weight: 3,300 kg, bar passage: 45 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS Swing diameter over bed: ø 430 mm Maximum turning diameter: ø 220 mm Maximum turning length: 310 mm Maximum bar capacity: ø 45 mm Distance between centers (spindle nose - tailstock center): 687 mm Carriage Travel Carriage travel X-axis: 160 mm Carriage travel Z-axis: 310 mm Main Spindle Spindle connection according to DIN 55026: KK5 Spindle outer diameter at front bearing: ø 80 mm Main Spindle Drive AC motor, power (100%/40% duty cycle): 9/13 kW With integrated holding brake for driven tools Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotational Axis) C-axis resolution: 0.001° Input for Sinumerik/Fanuc drives: 1,000 / 100 rpm Podpjwxwvaefx Ah Uerf Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives AC motors in X and Z axis Feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position dispersion Pₛₙ according to VDI 3441 in X/Z: 3 / 3 µm Tool System Disc turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool interface for square tools: 20 × 20 mm Shank diameter for boring bars: ø 32 mm Number of tool stations: 12 Turret indexing time: 0.14 s MACHINE DETAILS Total connected load: 17 kW Machine weight: approx. 3.3 t Space requirement: 2.25 x 1.63 x 1.94 m

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Psdpfow Tg Adjx Ah Ujrf Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D Prsdewx R Rkspfx Ah Ujf travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 1 x 12 tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

Year of construction: 2007, operating hours: 8,500 h, condition: excellent (used), functionality: fully functional, Vertical BAZ Emco FAMUP MCX 750-1200 with IKZ 40bar year of construction: 2007 Control: Fanuc 21i Running hours: 8.500h Chip Blaster high pressure system - Max. Speed 8.000 min. - Tool magazine with 24 magazine places (ISO 40), - Tool magazine ISO 40 - 24 tightening bolts ISO 40 - Standard painting: red - gray - black - Spindle is prepared for high pressure cooling (connection A) - Tapping without compensating chuck - Central lubrication system - Chip removal from the housing via flushing device - Flushing gun for cleaning of working area, clamping devices, parts - Coolant device with 3 adjustable nozzles - Coolant tank 500 l - Spindle blowing device for cleaning the fixture during tool change - Illumination of the working area by halogen lamp 24 V - Two-color alarm lamp Psdpfx Ahoh Akhks Ujrf TECHNICAL DATA MCX 750 axis X - longitudinal: 750 mm axis Y - transverse: 500 mm WORKING RANGE axis Z - vertical: 640 mm clamping area: 900 x 520 mm T-slots: number, width, spacing 5x18x100 mm max. table load: 400 KG TABLE distance table surface - floor mm 925 speed range: 50 ÷ 8.000 min spindle motor power: 13/9 KW tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive Belt drive rapid traverse X,Y,Z m/1' 24 Working feed X,Y,Z m/1' 20 AXIS DATA Axis acceleration (X,Y,Z) G 0.25 One-way positioning accuracy in total stroke range XYZ µm ± 8 One-way repeatability X, Y, Z µm ± 8 PRECISION Reversal span µm 5* Number of tool positions: 24 Tool selection random Max. Tool diameter with (without) adjacent tools ø 75 (150) Max. Tool length: 250 mm Max. tool weight: 6 KG TOOL CHANGE Tool change time (tool/tool): 1.5". Connected load: 20 KVA dimensions LxDxH: 2,650x2,400x3,050m weight: 5,5to

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg Prjdpfx Ahowxxd Es Usf >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: S6AT2502, travel distance X-axis: 250 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 5,000 rpm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! Predpfewvi Eusx Ah Ujf TECHNICAL DETAILS Travel X-axis: 250 mm Travel Y-axis: mm Travel Z-axis: 600 mm Max. spindle speed: 5,000 rpm Feed force Y-axis: 7,000 N Rapid traverse: 12 m/min DRIVE & PERFORMANCE Max. drive power: 6.7 kW Main spindle speed range: 0–5,000 rpm SUB SPINDLE Chuck diameter: max. 200 mm Speed range: 0–7,000 rpm Travel range: max. 580 mm ELECTRICS Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 85 A MACHINE DETAILS Total height: 2,100 mm Total length: 5,000 mm Total width: 2,000 mm Total weight: 8,000 kg Tool holder: 30 mm Control manufacturer: SIEMENS Control model: SINUMERIK 840D Number of tool magazine positions: 12 EQUIPMENT Continuously variable spindle speed Chip conveyor With Y-axis and sub spindle Tool turret with 12 stations, all driven Tool holder: VDI 30 Includes 3-jaw chuck (RÖHM, Ø 250 mm)

Year of construction: 2001, condition: excellent (used), Digital display Heidenhain. Slide travel range Slide travel longitudinal (X) 450 mm Carriage travel transverse (Y) 300 mm Slide travel vertical (Z) 350 mm clamping surfaces 800 x 400 mm Tool holder SK 40 quill stroke 100 mm Swiveling vertical milling head ± 90 Speed range 50-2500 rpm Pjdjnab A Nspfx Ah Ujrf Machine dimensions: Length 1485 mm width 1475 mm height 1475 mm Weight approx. 1500 kg

Year of construction: 2006, condition: excellent (used), Control system Siemens 840D –Chop Mill—Carte Eternet Spindle recently changed stroke X axis 2000 stroke Y axis 800 stroke Z axis 700 rotation speed range 30 000 tr/min coolant through spindle (CTS) 30 bars with 2 metal filters 60 microns Electronic handwheel Linear scales Psdsl Dr D Uopfx Ah Usrf Pressurized optical rulers for X and Y axis motion control Chip conveyor Coolant gun

Condition: used, Year of construction: 1995, functionality: fully functional, turning diameter: 25 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, bar passage: 25 mm, bar diameter (max.): 25 mm, Emco ET425 2 main spindles, 2 pick-off spindles 2 turrets, 12 tools per turret or 4 driven tools with double bar feeder magazine Prjdpfx Ajw Adxpsh Uef

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Psdog Rcf Ispfx Ah Ujrf

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 Prodpfxjwxxdfs Ah Uef >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R6CQ2401, turning diameter over cross slide: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis in rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Outer spindle diameter of front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and workpiece sizes Distance between main spindle and tailstock: 805 mm Distance between main spindle and counter spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Counter spindle / tailstock Internal taper of counter spindle/tailstock: MK4 Tailstock travel: 500 mm Max. clamping force: 8,000 Nm Feed and Rapid traverse Feed force X/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool carrier Tool turret: 12-station Tool holder: VDI 30 Driven stations: 12 Psdpfx Aswu Ecgeh Uorf Speed range of driven tools: 0–4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK three-jaw chuck with 220 mm diameter - Tailstock included - Machine can be transported on a standard truck

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Predpfek Nk I Nsx Ah Ujf

Condition: repair required (used), Year of construction: 2008, operating hours: 9,000 h, functionality: not functional, machine/vehicle number: R65EW1851, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 4,200 rpm, No reserve price - guaranteed sale at the highest bid! Prjdpfovrz A Sex Ah Uef Nimble and precise machine with lots of accessories, driven tools and collet chuck with various collets, including square and hexagon. Condition: Used machine, previously used in Thailand. Due to the climatic conditions on site, the machine shows external signs of use. The pneumatics show signs of wear, especially from the distributor: brittle hoses, some broken. It is not possible to assign the hoses from the distributor valve without a diagram. The pneumatics must be repaired. TECHNICAL DETAILS Swing diameter over bed: Ø 600 mm Swing diameter over cross slide: Ø 360 mm Distance main spindle (clamping flange) - tailstock center: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel ranges Travel path X: 210 mm Travel path Z: 610 mm Main spindle Spindle connection according to DIN 55026: KK 6 Outer spindle diameter in the front bearing: Ø 100 mm Spindle bore: Ø 73 mm Hollow clamping cylinder with draw tube, max. passage: Ø 66.5 mm Max. chuck size: Ø 250 mm AC motor, power (100%, 60% ED): 15 / 18 kW Speed range (infinitely adjustable): 60 - 4,200 rpm Max. torque: 192 Nm Tailstock Automatic tailstock: hydraulically operated Tailstock travel: 500 mm Max. tailstock pressure force: 8,000 N Travel speed: 20 m/min Inner taper of the tailstock quill: MK 4 Feed drives Rapid traverse speed X/Z: 24 / 24 m/min Feed force X: 5,000 N Feed force Z: 7,000 N Acceleration time from 0 to rapid traverse: 0.2 s Position spread (according to VDI 3441 in X/Z): 3 / 5 µm C-axis (spindle 1 and 2) Resolution of the rotary axis: 0.001° Rapid traverse: 1,000 rpm Spindle indexing (disc brake): 0.01°

Condition: excellent (used), Year of construction: 2018, HT 45 SM2Y / SIEMENS - with driven tools + Y-axis CNC turning machine for complete machining of turned/milled components with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on the main and sub-spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Sub-spindle - 15 kW Speed range: Main spindle 0 - 7,000 rpm Sub-spindle 0 - 7,000 rpm Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity Ø 45mm) Sub-spindle: KK5 Y-axis: • Travel range: +40/-30mm • Rapid traverse: 15m/min Includes: • Hollow clamping cylinder on the main spindle • Draw tube for main and sub-spindle • Mechanical spindle brake (main/sub-spindle) • Part ejector and flushing through the sub-spindle • Sinumerik 840D-sl / OPERATE control o SHOPTURN dialog programming o USB interface o Network drive / Ethernet o 15" TFT color monitor Psdpfx Aewvlvvjh Uorf o 3D simulation o and much more • 2x 12-station tool turrets VDI 25 radial version with directional logic for up to 2x 12 driven tool stations! Swivel speed adjustable via feed switch! Performance data: o Max. 4kW at 2080 rpm o Constant torque 16 Nm o Speed range 0-6000 rpm o C-axis for main and sub-spindle o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1100mm (Type "hinged belt") • Coolant system integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar each 2 pcs. flushing pumps, 3.7 bar each • Hydraulic unit • Machine light • Documentation Includes: DE6400 1 pc Control language German S3Z580 1 pc 22-inch multitouch operating unit HT45 X3Z160 1 pc Tool monitoring Siem. 840Dsl X3Z690 1 pc SHOPTURN/MILL expansion kit 840DSL/828D X3Z710 1 pc 4-axis turning/balance 840DSL/828 S3Z20S 1 pc Glass scale X1 SIEMENS S3Z21S 1 pc Glass scale Y1 SIEMENS S3Z23S 1 pc Glass scale X2 SIEMENS X1Z140 1 pc Loader interface A8, S2, S3, S4, S6, R2, R6, R9PM S30593 1 pc Surcharge for flat chip conveyor S3Z610 1 pc Tool measurement HT45 S4Z140 1 pc Coolant gun S3Z160 1 pc Cooling unit HT45 S3Z010 1 pc Oil mist separator MT45/HT45/E45 S3Y300 1 pc Band filter 600l+conveyor HT45 S30605 1 pc Preparation HT45 sub-spindle unloading S30595 1 pc Robot interface HT45 S30596 1 pc Interface to measuring station S30597 1 pc Interface for unloading unit S30598 1 pc Wireless measuring probe Renishaw S30599 1 pc Tool layout by Emco 990717 1 pc Loading system IRCO ILS-RBL-8008 990718 1 pc Unloading system IRCO ILS-REX-8008 ..... Year: 2018 Machine No. S3A182001

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Prsdpfog Rcf Sjx Ah Usf

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm Podpfx Ahowag Sto Usrf >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Pjdpfxsk Nk Iwe Ah Uorf

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Psdpswvuf Tefx Ah Uorf Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.