Used Emco Maximat Super 11 for sale (127)

Condition: good (used), turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 600 mm Bdjdpoyz Dg Rofx Al Ajh weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min total power requirement 1,4 kW dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,716 h, travel distance X-axis: 260 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 3,450 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: 828D, product length (max.): 2,800 mm, number of axes: 3, This 3-axis EMCO Emcoturn 65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details. • Number of spindles: 2 • Spindle motor power: Main spindle: 17 / 22 kW; Counter spindle: 11 / 16.5 kW • Spindle speed range: 60 – 3500 rpm • Spindle bore: Ø105 mm • Number of tool slots: 12 • Rotating tools: yes • Lubrication tank: 10 l • Pump drive power: 0.57 / 2.2 kW • Air pressure: 6 bar • Cooling pressure: 3.5 bar (optional 14 bar) • Air supply: 5 l/min • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø95 mm • Main spindle spindle nose: A2-8 Bsdpfx Aloztc Rco Aodh • Main spindle bearing inner Ø: 160 mm • Main spindle bore diameter: 105 mm • Main spindle torque (40% DC): 380 Nm • Max. chuck size: Ø250 mm • Counter spindle torque (40% DC): 80 / 125 Nm • Counter spindle spindle nose: A2-6 • Counter spindle max. chuck: Ø200 mm • C-axis resolution: 0.001° • Turret type: VDI30 • Turret max. speed: 5000 rpm • Turret max. power: 6.7 kW • Turret max. torque: 25 Nm • Turret indexing time: 0.2 s • Rotary tools: VDI30 • Rotary tools speed: 0 – 5000 rpm • Rotary tools torque: 25 Nm • Rotary tools power: 6.7 kW • Coolant system tank capacity: 230 l • Coolant system flow rate: 15 / 65 l/min • Hydraulic unit max pressure: 50 barBigBore 95 version. Technical Specification Through-spindle Coolant No Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2019, functionality: fully functional, EMCO EMCOMAT FB-450 MC | DEMO | Sinumerik 828D | Warranty Description EMCO EMCOMAT FB-450 MC – DEMO machine in like-new condition Universal CNC toolroom milling machine equipped with a SIEMENS Sinumerik 828D control. The machine was manufactured in 2019 and has never been used in production. It was used solely as a demonstration machine and has very low operating hours. Bdodpfez Dib Tjx Al Aoh The machine is in excellent, near-new condition and is offered with extensive accessories included in the price. 6-month warranty on spare parts included. The EMCOMAT FB-450 MC is a highly versatile machine suitable for toolrooms, prototype production, maintenance departments, and precise single-part or small-batch production. It allows both vertical and horizontal milling. Technical specifications Working area X-axis travel: 450 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle center distance: 40–440 mm Rapid traverse X/Y/Z: 5,000 mm/min Working feed X/Y/Z: 10–5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Table Clamping surface: 800 × 400 mm Maximum table load: 300 kg Spindle Spindle speed: 10–5,000 rpm Spindle power: 10 kW Tool interface: ISO 40 Machine CNC control: SIEMENS Sinumerik 828D Dimensions (L × W × H): 1,980 × 2,030 × 1,990 mm Machine weight: approx. 2,270 kg Year of manufacture: 2019 Included equipment SIEMENS Sinumerik 828D CNC control Electronic handwheel Rotary table/turntable for vice Support arm for horizontal milling Installation rubber pads Side storage holders for 27 milling tools Set of 12 ISO 40 milling tool holders, including holders for horizontal milling Machine manual 6-month warranty on spare parts Condition DEMO / LIKE NEW The machine has never been used in regular production and was operated only for demonstration purposes. Machine can be inspected and demonstrated under power by prior appointment. Available for delivery.

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Bsdpfx Alezv Sdko Aedh

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt driven): Bodjy Enr Eopfx Al Aedh • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2021, operating hours: 4,393 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, NEW: EMCO EMCOTURN E45 (year 2021) CNC lathe – FANUC 0i-TF, 4,393 hours, like new! Bdedpfx Aezkhuhjl Ajh Includes a parts collection device for removing finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of manufacture: 2021 • Serial number: S4E213351 • Control system: FANUC 0i-TF incl. manual control wheel • Operating hours: 4,393 hours (see image 263.599 minutes = 4,393 hours) • Machine type: Single-spindle lathe with parts collection device • Number of tool positions: 12-position VDI-30 axial turret with two hole circles • Condition: like new, fully functional • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Further pictures and videos of the running machine will be sent upon request. _____ Item description For sale is a high-precision CNC turning center, EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 4,393 and in very good condition. Special features: • Control system: Modern FANUC 0i-TF control system for easy programming, including handwheel. • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 carefully transports finished workpieces out of the working area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical data: Working area and travel distances: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers (spindle nose - tailstock center): 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travel (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Main spindle drive power: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two hole circles • Mounting shank according to VDI (DIN 69880): VDI 30 • Tool section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse speed (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positioning accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & terms of sale: • CNC lathe EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included. • FANUC operating manuals and machine documentation • Loading by forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior arrangement. Subject to prior sale and errors.

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 13,067 h, functionality: not functional, Equipment: documentation/manual, Control system issues (under Programs) Bsdpfxoznvm Hj Al Aedh Electrical fault (control boards) Suitable for spare parts Tool changer – chain conveyor included Without tools Already disassembled and stored separately!

Condition: good (used), Year of construction: 2007, operating hours: 7,638 h, functionality: fully functional, EMCO E45 CNC lathe Used, fully functional. Includes chip conveyor and Emco Compact Load magazine. Working area Swinging diameter over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar diameter: 45 mm Distance between centers: 687 mm Travel distances Saddle travel X: 160 mm Saddle travel Z: 310 mm Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positional accuracy P₉ according to VDI 3441 in X/Z: 3 / 3 µm Main spindle Spindle connection according to DIN: 55026 KK5 Bdedez A T S Topfx Al Ash Spindle bearing diameter, front: 80 mm Through-hole with max. diameter: 45 mm Max. chuck size: 160 mm Speed range, continuously adjustable: 0–6,300 rpm Max. torque: 78 Nm C-axis Resolution: 0.001° Spindle indexing for driven tools (disc brake): 0.01° Tool turret Tool holder: VDI 30 Tool positions: 12 Of which driven: 6 Machine data Total power requirement: 17 kW Footprint (L × W × H): 2.25 × 1.63 × 1.94 m Machine weight: 3.3 t The machine is immediately available and can also be inspected. Upon request, we can also arrange transportation.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Universal milling machine EMCO FB-4 with 3-axis digital display Heidenhain, in very good condition. Technical data: >> Year of manufacture: 1997 >> Fixed angular table (clamping area 800 x 400 mm) >> Speed: 18 speed stages from 63 - 3150 rpm >> Mechanical feed: 18 stages Feed rate X and Y: 16-800 mm/min Feed rate Z: 8-400 mm/min Rapid traverse X and Y: 2400 mm/min Rapid traverse Z: 1200 mm/min >> Travels X/Y/Z: 450/300/350 mm >> Equipment: Vertical & horizontal spindle Bdodjzq Efqopfx Al Aeh >> Vertical quill, extendable 100 mm >> Tool holder: SK40 >> Weight approx. 1500 kg >> Machine dimensions L x W x H: 1485 x 1475 x 1680 mm >> Motor brake >> Connection value: 4 kVA Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray, machine feet >> Operating manual, spare parts list About the machine: Offered is a universal milling machine EMCO FB-4 in very good condition. The EMCO runs very smoothly, even at high speeds. The vertical milling head is fastened with four screws and can be easily swung to the side using the articulated arm visible on the left side of the machine. Feed and rapid traverse in each axis. The Emco comes from a training workshop and has been used very little. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 65 rpm, overall weight: 170 kg, total length: 1,200 mm, total width: 450 mm, Single-phase 230-volt, 2-speed motor is running smoothly. Geared headstock, gears running in oil. 8 spindle speeds adjustable from 65 to 2800 RPM. Power feed in sideways directions. Thread cutting possible, gear changes included. MT2 tailstock spindle. Made in Austria. Emco cabinet. Quick-change toolpost. Distance between centers: 620mm Center height: 105mm Spindle bore: 20mm Emco FB2 milling column. Geared head, gears running in oil. 6 spindle speeds adjustable from 120 to 2000 RPM. Bodpfx Aljz E Ryme Aodh Head adjustable in height and angle. MT2 spindle. Overall dimensions: 120x45x115cm Includes all accessories as shown in front of the machine. Contact us for shipping options! €2,650.00

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 650 mm center height over bed 140 mm centre distance 650 mm bed width 155 mm spindle taper KK 4 CAMLOCK DIN 55029 spindle bore 40 mm turning speed range - stepless 4.000 U/min 4-jaw-chuck diameter 140 mm quick change toolholder MULTIFIX Typ A drive capacity - spindle motor 7,5 kW taper in tailstock-quill MK 2 dia. of quill 30 mm quill stroke 80 mm voltage 400 V total power requirement 7,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1,30 x 0,70 x 1,60 m Bdedpfx Aljz Abwyo Ash - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder

Year of construction: 2013, condition: ready for operation (used), A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible. Bdedpfey H I Hxox Al Ash

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,200 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, For sale is a powerful and precise CNC lathe EMCO TURN 365 / E65, manufactured in 2007. The machine is equipped with a Siemens control system, powered tools on all 12 stations, a C-axis, a tailstock, and a matching EMCO COMPACT LOAD E65 short bar loader. The machine is in well-maintained condition and is ready for immediate use. Technical data: Manufacturer: EMCO MAIER Machine operating hours: 17,842 h Production operating hours: 3,369 h Model: EMCOTURN 365 / E65 Year of manufacture: 2007 Control system: SIEMENS Working area & travels: Travel X: 210 mm Travel Z: 610 mm C-axis: 360° (resolution 0.001°) Max. turning length (part length): 520 mm Max. turning diameter: ø 310 mm Diameter over bed: ø 600 mm Max. bar diameter: ø 65 mm Main spindle: Speed range: 60 – 4,200 min⁻¹ Drive power (100% / 60% ED): 15 / 18 kW Max. torque: 192 Nm Spindle connection: KK 6 (DIN 55026) Tool turret: Bdjdpfx Asz Aknhjl Ajh Type: 12-position VDI 30 axial turret Powered tools: Yes, on all 12 stations (for milling & drilling) Accessories & equipment: Automation: Short bar loader EMCO COMPACT LOAD E65 Tailstock: Hydraulically operated (500 mm travel, MK4) Chip conveyor: Included Measuring arm: Tool setting measuring arm directly in the working area Part catcher, storage at chip conveyor Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying/selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Very nice machine, originally used for vocational training, with a digital display and good accessories. Available in our warehouse from the middle of week 37. Estimated price: €18,500 net. Bdedezxycmopfx Al Aoh

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2DU2101, CNC lathe with main and sub spindle, featuring two 12-position turrets and double bar feeder. Make: EMCO, Model: TURN 332MC Plus Year of manufacture: 2006, Serial number: R2DU2101 Control system: Siemens Maximum turning diameter: 220 mm ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment plan, or individual financing model – together, we will find the solution that fits your needs. Upon request, we can also arrange complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so that you do not have to worry about a thing. Bdodeyzn U Eepfx Al Aeh 📞 Feel free to contact us for more information or a non-binding quote. We provide personal and professional advice. Subject to prior sale, modifications, and errors!

Condition: like new (used), Year of construction: 2008, functionality: fully functional, turning diameter: 340 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, turning length: 650 mm, total length: 1,750 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, The machine is as good as new, comes from educational use, and is equipped with a complete collet system. Bodpfx Ajywfrtol Aodh

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Bjdjyvtugepfx Al Asdh

Condition: used, Year of construction: 1999, operating hours: 72,805 h, functionality: fully functional, spindle bore: 65 mm, total length: 3,074 mm, total width: 1,941 mm, type of input current: three-phase, overall weight: 4,000 kg, spindle nose: Kk6, Equipment: documentation/manual, We are offering this used EMCO EMCOTURN 365/65 CNC lathe, manufactured in 1999. Model: EMCOTURN 365/65 Supply voltage: 400 V Phases: 3/PE Bdedpfxozzrwho Al Ajh Frequency: 50/60 Hz Maximum current Imax: 59 A Rated current Im: 27 A Short-circuit current Ik: 6 kA Duty cycle S6: 40% Year of manufacture: 1999 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: S4ES_V16, CNC lathe with main spindle and 12-position turret Make: EMCO, Model: EMCOTURN E45 Year of manufacture: 2019, Serial number: S4ES_V16 Control: Siemens, type Sinumerik 828 Maximum turning diameter: 220 mm Chip conveyor: Manufacturer Bürener, type SPE62/12 ----- Attractive offer – flexible & worry-free Bsdpfxeyzn Tns Al Aedh We offer you not only a high-quality product, but also tailored financing options to suit your needs. Whether down payment, installment payment, or custom financing models – together we will find the right solution. On request, we also take care of the entire transport organization. From planning to reliable delivery, we ensure a smooth and on-time process, so you don't have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding quote. We provide personal and competent advice. Subject to prior sale, modifications, and errors!

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Bdjdpezhm Afefx Al Ajh Coolant tank: 30 l Flow rate: 15 l/min Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-rib belt EQUIPMENT Quill clamping device Cooling system with 30-liter tank Coolant tank with quick-release closure Control panel Work light Coolant hose CE marking

Condition: excellent (used), Year of construction: 2022, EMCOTURN E65 SMY - SIEMENS 3-AXIS CNC TURNING MACHINE WITH A TAILSTOCK AND POWERED TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal turning machine for complete machining with stable and precise linear guides. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. Main spindle: • Connection A2-6" (DIN 55026) • Max. bar diameter: ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Tailstock: • Connection A2-6" (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-position tool turret VDI 30 radially arranged with direction logic for up to 12 powered tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40mm Includes: • Hollow chuck cylinder incl. draw tube • C-axis for main/tailstock • Mechanical spindle brakes • Sinumerik 828D control with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 15" multi-touch color monitor - 3D simulation, etc. • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the tailstock • Air gun with spiral hose • LED machine bay light • Hydraulic unit • Interface for chip conveyor • Vibration-damping leveling feet • Mounting angle and high-performance anchor • Documentation / CE certificate Machine No. S6E222101 Year of manufacture: 2022 • Sinumerik 828D with dialog programming • Tool turret • 12-position tool turret VDI30 • Hollow chuck cylinder, C-axis for main and tailstock • Coolant system with coolant pump, part ejector • Hydraulic unit • Chip conveyor Jomatec 1200 mm • Tool breakage and wear monitoring • Part collection device • Short bar loader interface SL1200 • Tool measurement • 14 bar high-pressure coolant system • 3-jaw chuck BB-D 210/3 KK6 • Maximum machining length 175 mm • Maximum finished part diameter 65 mm Bdsdezi Rr Topfx Al Aeh • Maximum finished part weight 4.5 kg • Internal tool holder • Straight milling holder 90 mm • Angle drilling and milling holder • Door automation E 65

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Bedpfxjxyvaqs Al Asdh Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: excellent (used), Year of construction: 1994, EMCOTURN ET 342 Siemens Bdsdpfxez Hn Ahs Al Ash Year of manufacture: 1994 Machine no.: R3XH8005

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model TNC 620 Table Table load 1500 kg Main Drive Number of axis 4 Spindle Speed 15000 RPM Tool taper SK 40 Movement X-Axis Movement 1200 mm Z-Axis Movement 500 mm Y-Axis Movement 610 mm Tools Slots in storage 32 Bdodjx D Dzdjpfx Al Aeh This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2006, EMCO E65 TCM CNC turning machine Technical specifications •Manufacturer: EMCO •Model: E65 •Year of manufacture: 2006 •Machine number: R6EU1351 •Control system: Fanuc 0i •Bar diameter: Ø 65 mm •Axes: X / Z / C – 210 / 610 mm / 360° •Tool turret: 12 driven tool stations •Tool holder: VDI 30 Equipment •Bar loader •Chip conveyor Bdjdpezvpqhefx Al Ajh •12 driven tool stations •VDI 30 interface Software options •Manual Guide i •Polar interpolation •Cylindrical interpolation •Helical milling