Used Emco Super 11 for sale (111)

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs Gkedpsu Ixw Ajfx Akhod *

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Gjdjw Dfhuepfx Akhskd

Condition: used, Year of construction: 2024, travel -x axis 5.550 mm travel -y axis 4.000 mm travel -z axis 2.000 mm control HEIDENHAIN - TNC 640 surface area 4.000 x 2.000 mm Gsds Ai Ughspfx Akhekd faceplate diameter 3.500 mm turning speed range - faceplate 0 - 150 U/min max. workpiece weight on faceplate 20.000 kg Spindle speed 15 - 6.000 min -1 tool adaptor HSK 100-T spindle drive 38 kW numbers of positions in the tool changer 40 Travelling Column Gantry Milling Machine for 5-Axis Simultaneous Machining with Integrated Rotary Turning Table | MECOF / EMCO – DYNAMILL HP5 equipped with Coolant system with internal coolant supply ITC (40 bar), Chip conveyor, Heidenhain TS 460 touch probe, 40-position automatic tool changer, The machine has only approx. 1.108 H spindle hours. Additional Equipment and Features: - NC milling head (infinitely variable positioning) - Heidenhain HR 550 FS wireless handwheel - Kinematic optimisation of the milling heads - Laser tool measurement system - Interpolation turning The machine is in a very well-maintained, like-new condition and can be inspected under power at any time in the factory location. Videos of the machine at its current location are available upon request. Please refer to our quotation for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DYNAMILLHP5 | DYNAMILL HP 5 | DYNAMILL HP-5

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted Gjdpfxoycvaqj Akhjkd - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,941 h, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This EMCO Emcoturn 325 features a 3-phase supply voltage of 400 V and a rated current of 9.5 A. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 325 machine we have for sale. Contact us for further details. Gjdpfx Aksy A Hw Uehskd • Supply voltage: 400 V • Phase: 3-phase (3/PE – three phases + protective earth) • Frequency: 50/60 Hz • Rated current (IM): 9.5 A • Maximum current (Imax): 18 A • Short-circuit current (Ik): 6 kA • Duty cycle: S6 – 40% Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm Gkedoyhcfkjpfx Akhjd • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: excellent (used), Year of construction: 2024, S45 TCM – SINUMERIK 2-AXIS CNC TURNING MACHINE WITH TAILSTOCK AND POWERED TOOLS, INCLUDING A C-AXIS 11 kW motor power, 0-6300 min-1 speed, linear guide system, digital drive system, direct rotary encoder on the spindle. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. NEW COLOR SCHEME Includes: Gkodpfx Aj Ai Ttkokhsd • 12-position tool turret VDI 30, axial with direction logic for up to 6 powered tool holders! max. motor power 4 kW max. torque 16 Nm speed range: 0-5000 rpm • C-axis for main spindle • Mechanical spindle brake (min. division 0.01°) • Tailstock Tailstock diameter: 60mm Tailstock stroke: 120mm Morse taper: MK 4 max. tailstock force: 5000N • Headstock, size 45 with spindle connection KK5 (DIN 55026) • Hollow chuck cylinder incl. draw tube • Control system Sinumerik 828D - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 10.4" TFT color monitor - 3D simulation - and more • Machine light • Coolant system • Hydraulic unit • Interface for chip conveyor • Documentation Year of manufacture: 2024 R2L240501

Condition: used, Year of construction: 2003, functionality: fully functional, control 840D-PCU 50 V1 3 Gedpsqn A Rrofx Akhjkd coolant ja chip conveyor ja kW generator - rated current 110 A connected load 56 kW

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min Gedpfx Aewkpzlekhskd • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: S5E261602, spindle bore: 59 mm, spindle speed (max.): 6,200 rpm, spindle motor power: 30 W, total height: 2,275 mm, total length: 4,015 mm, total width: 2,156 mm, workpiece weight (max.): 160 kg, type of input current: three-phase, overall weight: 4,400 kg, distance table center to spindle nose: 1,015 mm, spindle nose: KK5, Equipment: documentation/manual, EMCO UT50 MY (Siemens ONE), S5ES103 Versatile universal lathe with main spindle, tailstock, and turret, including a milling drive. Designed for machining medium-sized chuck, shaft, or bar parts. It impresses with its user-friendly Gkedo Aiuxlepfx Akhjd operation, high accuracy, fast changeover times, and efficient cost-effectiveness. Main spindle (belt drive): • Connection A2-5" (DIN 55026) • Max. bar capacity: ø50 mm • Max. drive power: 30 kW • Max. torque: 143 Nm • Max. speed: 6200 rpm (depending on the clamping device) Tool system: 12-station tool turret VDI30 axial, with direction logic for powered and stationary tools. • Max. power: 4 kW • Max. torque: 16 Nm • Max. speed: 5000 rpm • C-axis on the main spindle Tailstock: • Programmable tailstock, hydraulically operated, robust construction without a quill, max. contact force 6000 N, Morse taper MT4. Y-axis: • Travel range: +40 / -40 mm • Rapid traverse speed: 10 m/min Includes: • Hollow clamping cylinder incl. draw tube • Mechanical holding brake (main spindle) • Sinumerik ONE control system o 15" multi-touch display o SHOPTURN dialog programming o 3D simulation and monitoring o Rest material removal cycle o Execution from external storage o CAD reader (DXF import) o TRANSMIT and TRACYL o USB interface / network drive (Ethernet) o PC keyboard incl. HMI hotkeys, and much more. • LED machining area lamp • Coolant system including coolant pump (7 bar/50 Hz or 10 bar/60 Hz) • Work area flushing (additional pump 3.5 bar) • Air gun with spiral hose • Hydraulic unit • Preparation for mechanical/electrical oil mist extraction • Interface for chip conveyor • Vibration-absorbing leveling feet • High-performance anchor bolts • Documentation / CE certificate - PARTS CATCHER / UT50 Max. finished part length: 120 (200) mm Max. finished part diameter: 51 mm Max. finished part weight: 2 kg - EMCO BAR LOADER INTERFACE FOR ECONDPARTY BAR LOADERS - MACHINE STATUS LAMP (LED) - TOOL PRESETTER / UT50 - 14 BAR HIGH PRESSURE COOLANT PUMP / 50 Hz - CHIP CONVEYOR 1200 MM / UT50 - CLEANING GUN / MULTIFLOW - FOOT PEDAL - Instruction Manual UniversalTurn 50 EN - Standard packing - Control language / ENGLISH

Condition: used, Year of construction: 2008, overall weight: 5,000 kg, input voltage: 400 V, type of input current: AC, We are offering this used EMCO E-1200 vertical machining center, manufactured in 2008. Manufacturer: EMCO Model: E-1200 Serial Number: M-0640208 Year of Manufacture: 2008 CONTROL MANUFACTURER: SIEMENS CONTROL MODEL: SINUMERIK 810D MACHINE WEIGHT: 5300 KG TABLE LENGTH: 1300 MM TABLE WIDTH: 570 MM TRAVEL Gsdpfxo Ai Sdwj Akhekd NUMBER OF AXES: 3 X-AXIS TRAVEL: 1200 MM Y-AXIS TRAVEL: 550 MM Z-AXIS TRAVEL: 500 MM TECHNICAL SPECIFICATIONS SPINDLE SPEED: 10000 RPM TOOL STATIONS: 20 If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Gedpfjyxxhqex Akhekd

Condition: good (used), Year of construction: 2003, EMCO HYPERTURN 665MCPLUS Turning center with C/Y-axis Portal loading system and bar loader magazine Turning and milling operations performed in a single setup Year of manufacture 2003 Control system: SIEMENS SINUMERIK 840D Equipment: Portal loading system with 20 base pallets Automatic bar loader magazine, manufacturer IEMCA, type MASTER 880 MP 2 tool turrets, each with approx. 12 stations Main spindle with C-axis Counter spindle with C-axis Chip conveyor, manufacturer KNOLL Cooling unit, manufacturer KELVIO Included in the scope of delivery: VDI tool holders Powered tools Tool cabinet Drawer cabinet Operating manual/documentation Machine parameters on storage medium Technical data and equipment – see PDF. All technical information, illustrations, and content are non-binding and without warranty. Subject to change and errors. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only the accessories that are explicitly listed here, in the order confirmation, and on the invoice. EXW D-40721 Hilden, Germany (Incoterms® 2020) excluding disassembly, removal, and loading Gedo Ah Evmspfx Akhekd Delivery time: immediately, subject to prior sale Payment: 100% prepayment upon order placement

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: Gjdpfjzcplyex Akhjkd - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered).

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Coolant tank: 30 l Flow rate: 15 l/min Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-rib belt EQUIPMENT Quill clamping device Cooling system with 30-liter tank Coolant tank with quick-release closure Control panel Work light Coolant hose Gkodpozhm Afefx Akhod CE marking

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: R6L211501, EMCO Turn S65 TM – 2-axis CNC lathe with EMCO SL1200 short bar loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4,200 rpm spindle speed - Linear guideway system - Digital drive technology - Direct spindle encoder - Sinumerik 828D with ShopTurn conversational programming Equipment - 12-position VDI 30 axial tool turret with direction logic for up to 12 live tooling stations (5 kW, 20 Nm, 0–5,000 rpm) - C-axis for main spindle - Mechanical spindle brake (minimum increment 0.01°) - Size 65 headstock with KK6 spindle nose (DIN 55026) - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Hydraulic power unit - Interface for chip conveyor - Documentation Other features - EMCO SL1200 short bar loader ----- Attractive offer – flexible & worry-free Gksdpfoyzn H Usx Akhjd We offer you not only a high-quality product but also tailored financing solutions adapted to your needs. Whether down payment, installment plans, or individual financing models – together we will find a solution that fits. If you wish, we can also handle the complete logistics and transportation. From planning to punctual delivery, we ensure a smooth and reliable process, so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide personal and professional advice. ----- Subject to prior sale, errors, and changes.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Godpfjxp Hudox Akhekd

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Tool Milling Machine Emco C40 Linear with Digital Display and Path Control – Excellent Condition, Tool Holders, CE-Compliant! Technical Data: >> Year of manufacture: 2009 Machine No.: BA1GX1201 >> Milling table clamping area: 800 x 400 mm Number of T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 taper >> Manual drawbar system Godpfx Ajyliffjkhekd >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Folding machine enclosure >> Coolant system >> Machine lamp >> Tool trolley with tool holders About the machine: Offered is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in an almost mint condition. It comes from a government facility where it was only used minimally. The control system is very user-friendly. Switching from vertical to horizontal operation is very easy by simply swivelling away the vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to view and test the machine under power at our facility.

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height Gjdpfxsz Rzh Ho Akhokd of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Gkodpfx Akoxzq Ncohsd Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 340 mm turning dia. over face-slide: 158 mm turning length: 300 mm facing movement (x-axis): 300 mm longitudinal traverse (z-axis): 300 mm control: Siemens 810T revolution per minute: 60 - 4.000 U/min Gsdpfsylt Nzex Akhekd max. torque on the spindle: 106 - 145 Nm external spindle dia. in forward position: 80 mm feed motor: 8500 N rapid motion - x-axis: 6 m/min tool turret - number of stations: 8 tailstock adjustment: 120 mm Main spindle capacity: 11/15 kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 20 KVA The EMCO TURN 340 TC is characterized by its compact design, robust machine construction, and proven Siemens control system. It is particularly suitable for companies looking for a reliable CNC lathe for machining small to medium-sized workpieces. It is a compact and robust CNC lathe designed for the precise machining of turned parts in both single-part and series production. The machine is equipped with the proven Siemens Sinumerik 810T CNC control system. *

Condition: used, Emco F3 universal milling machine from a vocational training workshop With axis digital readouts Includes accessories as shown in the picture X: 350 mm Y: 300 mm Z: 200 mm Table: 600 x 200 mm Rapid traverse rate X, Y axis: 1200 mm/min Spindle speeds: 80 – 2200 (8) rpm Quill travel: 45 mm Gkedpfoztwgfox Akhed #8498 Net price

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 77 mm, turning diameter: 520 mm, center height: 260 mm, turning length: 1,500 mm, feed length X-axis: 310 mm, feed length Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 4 m/min, spindle mount: MK 6, EMCO LABOR E-260 SELF-LEARNING LATHE WITH FAGOR 8055 CNC, COMPLETE MACHINE WITH ACCESSORIES, MANUALS, AND CE DECLARATION CENTER HEIGHT: 260 mm DISTANCE BETWEEN CENTERS: 1500 mm Godpj Aa Nicefx Akhokd MAXIMUM DIAMETER OVER BED: 520 mm MAXIMUM DIAMETER OVER CARRIAGE: 300 mm SPINDLE NOSE, CAM LOCK TYPE: 6" SPINDLE BORE DIAMETER: 77 mm SPINDLE POWER: 16.5 KW SPINDLE SPEED: 2500 RPM (2 RANGES) CNC: FAGOR 8055 MOTORS AND DRIVES: SIEMENS

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, total height: 3,000 mm, total width: 2,330 mm, table load: 250 kg, overall weight: 9,200 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 20,000 W, tool weight: 8,000 g, product length (max.): 2,880 mm, number of axes: 5, This 5-axis EMCO MAXXMILL 500 was manufactured in 2016. It features a maximum spindle speed of 15,000 rpm and a tool magazine capacity of 40 tools, allowing for efficient machining operations. The machine includes a swivelling-rotary table with a clamping area of 600 x 600 mm and a maximum workpiece size for 5-side machining of 500 x 500 x 475 mm. If you are looking to get high-quality milling capabilities, consider the EMCO MAXXMILL 500 vertical machining centre. Contact us for further details. • B-axis (tilting): ±100° • C-axis rotation: 0–360° continuous • Rapid traverse X/Y/Z: 30 m/min • Max rotational speed B/C axes: 25 rpm / 25 rpm • Spindle nose to table distance: 150–650 mm • Max acceleration X/Y/Z: 3 m/s²Main spindle • Max torque: 100 NmWorking table • Type: Swivelling-rotary table • Clamping area: 600 × 600 mm • Max workpiece size for 5-side machining: 500 × 500 × 475 mm • T-slots: 5 • T-slot spacing: 100 mm • Table-to-floor distance: 776 mmTool changer • Magazine type/capacity: Drum magazine, 40 tools • Tool change system: Double-gripper arm • Tool-to-tool time: 2 s • Max tool diameter: 80 mm (125 mm without adjacent tools) • Max tool length: 250 mm • Max total magazine load: 100 kg • Tool management: RandomAccuracy (manufacturer nominal) • Positioning accuracy X/Y/Z: 8 µm • Repeatability X/Y/Z: 3 µm • B-axis positioning accuracy: ±20 arcsec • C-axis positioning accuracy: ±10 arcsecCoolant system • Tank capacity: 250 L • Standard pump pressure: 2 bar • Max flow at 2 bar: 40 L/minCondition, refurbishment, and status • Comprehensive refurbishment by specialist: • Complete refurbishment and installation/adjustment of swivelling-rotary table • Extensive cleaning and reconditioning • Installation and setup of workpiece and tool measurement probes • Automatic kinematic calibration (KINEMATIC AUTO) • Brand-new main spindle installed • Machine connected to power and operational • Milling test possible Additional equipment • Automatic workpiece probe • Laser tool measurement system • Through-spindle coolant system, 20 bar • Chip conveyor (chip discharge height: 1,100 mm) Gkjdo Ah H Nqepfx Akhod • Linear scales on X, Y, Z • Automatic machine door • Automatic kinematic system (KINEMATIC AUTO) • Oil supply for machining fixtures via rotary joint at table centre • Spare spindle available (inclusion in sale to be confirmed) Technical Specification Taper Size ISO 40

Year of construction: 2007, condition: used, X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible. Gkedpfx Aez Sr Nwokhjd