Used Ending Range for sale (18,009)

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Iijdpfx Aodfx Hcepnjb

Condition: used, We offer this used BUSCK WE250M-4 machine, type butt-end reduce, year of manufacture unknown. Type: WE250M-4 Insulation class/operating mode: S1 Degree of protection: IP55 Rated voltage: 400 V Iiedey Stwmspfx Apnsb Frequency: 50 Hz Rotational speed: 1480 rpm Rated power: 5.5 kW Rated current: 9.5 A Cos φ: 0.89 Rated voltage (Y): 690 V Frequency (Y): 50 Hz Rotational speed (Y): 1480 rpm Rated power (Y): 5.5 kW Rated current (Y): 5.1 A Cos φ (Y): 0.89 Rated voltage: 400 V Frequency: 60 Hz Rotational speed: 1780 rpm Rated power: 6.3 kW Rated current: 9.26 A Cos φ: 0.88 Bearing: NU314 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner Iedpjx Ezuysfx Apnoib - Drying oven - Production capacity: up to 600 ends per minute

Condition: excellent (used), shipping EU ~300euro Ijdpjl Skk Ujfx Apnsib

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Isdpfoghl Emex Apnsib Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Ijdpfoyrh Rgsx Apnsib Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D30L/7913, Offer Number: D30L/7913 Machinetype: spring end grinding machine Make: WAFIOS Type: FEL3 Isdewi Szropfx Apnsib Constr. year: 1980 wire diameter: 2-10 mm spring diameter: 120 mm legth of springs: 10 - 240 mm Location: In our warehouse

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps - Mist lubrication system - depth adjustment - 400V Iisdpfx Aer Iiimjpnob

Condition: used, Year of construction: 1990, Double tenoning machine with 3+3 motors, equipped with protective and soundproof cabins, 6-metre opening. Iiodpoyzralefx Apnjb

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20404, elumatec AF 222 For machining transoms and door profiles made of aluminium or plastic Manual feed of the routing unit Large cutting range of up to 400 mm Continuously adjustable table height The material stop can be pivoted up to 60° to the left and right. Notching up to 30° (acute angles, left and right). Detent at 90° with index pin. With quick tool change system and "Spindle Lock" for easy tool changing Precise, smooth-action and low-wear recirculating ball guides Horizontal and vertical pneumatic material clamping provides flexibility Adjustable depth stop Pulsed coolant system Iiodpfxoy Hcb Dj Apnsb Cutting tool diameter max. 280 mm Cutter bore 40 mm Profile height max. 165 mm Cutting height 145 mm Cutting depth 110 mm Cutting length 400 mm Spindle speed 2,800 rpm Travel 550 mm 2.5 kW of power at 400 V / 50 Hz Compressed air supply 7 bar Power output 2 kW Air consumption 10 l per working cycle, 20 l with minimum-volume lubrication system Length 1,540 mm, depth 905 mm, height 1,000 mm, weight 248 kg Machine is ready for operation. Tool was sharpened

Condition: good (used), Year of construction: 2024, Year of manufacture: 2024 3D AOI inspection system with intelligent DLP projection 1 x AOI database structure Web Apache server 1 x teaching station (offline programming) 1 x verification station (verification or repair station) 1 x Q-up (analysis station) 1 x administrative interface for AOI management PCB thickness: 0.4-4 mm PCB weight: up to 4 kg Iiodpoyw Nxwofx Apnob PCB warp: +/- 10 mm Compressed air: 0.3x0.6 Mpyi, 10 l/min Lighting: RGB color high-light method 2D camera and 3D measurement Resolution: telecentric lens with 15µ + 4 side cameras with 10µ each Height measurement up to 25 mm PCB size: 50x50 – 510x460 mm Component clearance: top 40 mm, bottom 40 mm

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Iedpfeyz Si Hjx Apnoib Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 300 Iedpfx Apsyz Siasnjib Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: new, Spindle speed 9000rpm, Spindle motor 4kw, Cutter cycle motor 0.75kw, Maximum tenon width 100+2RMmm Maximum tenon thickness 30mm Isdpfxon Nwdlj Apnoib Maximum tenon depth (shoulder) 50mm Table tilt upwards 0-15 degrees Table tilt downward 0-30 degrees Table tilt side 0-20 degrees Table fence adjustable 90 to 45 degrees Pneumatic adjustable work place clamps x 2 PLC operation TCT disposable tip cutter block Overall dimensions 1300 x 1200 x 1600mm Weight 950kg

Condition: new, New hydraulic grapple bucket in very good quality with removable side panels. Iijdpfsy N A R Rox Apnsb Suitable for mini skid steer loaders such as Kubota, Ditch Witch, Vermeer, Toro Dingo, Vmeng, Derette, Pippa Price without VAT (+23%) Available shipping to anywhere in EU

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Iedjwnx Uiopfx Apnjib Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: refurbished (used), EVERY TYPE OF CELASCHI FEEDING CHAIN FULLY RECONDITIONED Iiedpfx Ajv Hmyxjpnjb

Condition: new, Year of construction: 2025, power: 71 kW (96.53 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, * incl. STOLL Solid 38-20 front loader * enclosed cab * air conditioning * all-wheel drive * rear power lift (three-point hitch) * rear hydraulics * front hydraulics * creeper and super-creeper gears * FARMotion 4-cylinder diesel engine * 5-speed manual transmission * work lights * height-adjustable jaw-type trailer hitch * air brake connections for trailer operation * tire size front: 480/65R24 * tire size rear: 540/65R34 * fuel tank: 100 liters * AdBlue tank: 15 liters * technical gross weight: 6,500 kg * curb weight: 4,360 kg * permissible trailer load: 28,000 kg * overall length: 4,240 – 4,275 mm * wheelbase: 2,350 mm ----- Vehicle number: 11938 ----- Errors and interim sale excepted. Advertising and various lettering have been digitally removed. We are happy to assist you with all formalities involved when purchasing a vehicle. Simply let us know your requests and suggestions, and we will take care of the rest. Iisdpfxjyvnw As Apnsb Among other services, we can offer you the following for an additional charge: - Trade-in of your old vehicle - TÜV/SP inspection - Complete export processing - Arrangement of financing - Application for export license plates - Vehicle transport and delivery - Vehicle registration - Vehicle recovery and transport YOUR VTS TEAM

Condition: excellent (used), Gauge block connectors and universal holders Ijdsylkdpjpfx Apnjib System KOBA Z 101 Hommelwerke as a set in case (108149)

Condition: used, Machine for longitudinal and transverse profiling of parquet. Motors 6+6. Iedpfx Apoy Hmlysneib

Condition: refurbished (used), End mill Make Garant type EQ 753200 Slot milling cutter Ijdpfxjiuh Eyj Apnjib Corner milling cutter shank diameter 20 mm cutting length 38 mm used freshly ground and coated material HSS Co 8

Condition: refurbished (used), End mill, flute cutters, Iedeiuh E Ijpfx Apnoib Corner milling cutter Make Walter type prototype P 31 23017-20 shank diameter 20 mm cutting diameter approx.19 mm cutting length 38 mm freshly ground and coated Material HSS Co

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 32664, collet bore: 40 mm, saw blade diameter: 220 mm, main saw diameter: 220 mm, overall weight: 1,200 kg, table length: 5,000 mm, positioning accuracy: 0.1 mm, table width: 250 mm, working range: 250 mm, pressure: 6 bar, type of input current: three-phase, total width: 250 mm, cutting width (max.): 250 mm, compressed air connection: 6 bar, cutting diameter: 220 mm, extraction nozzle diameter: 120 mm, working height: 30 mm, Friulmac Randomat E 001 Serial No: 32644 Year 2001 in excellent condition specially made for End Matching all types of wood flooring. Fitted with a Sound & Safety Enclosure with front sliding doors and an entrance door at each end. 2 x 4kw motors do the cutting of the tongue & groove. Will machine random or fixed lengths from 250m/m up to 6m. long. Iiodpfx Apsx Ec Hnenob 6m. Long Infeed Belt Conveyor, and a 6m. Long Outfeed Belt Conveyor. Siemens Simatic OP7 Control System. Complete with documentation for Operating and Programming.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. Ijdpfxsv Er Nie Apnjib With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp.

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Iedpfx Aewm Nd Eopnsib