Used Ess Mig Mag 205 M for sale (92,765)

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) Bjdpfowbillex Aczslr ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. Bodpfxewbh Ifo Aczjlr ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), FRONIUS TPS 2700 with FK 4000 (SYNCHROPULS 270A DEVICE) Alu Edition ✅ Scope of delivery: ➤Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤Fronius FK 4000 water cooling system ➤Fronius hose package with display on the torch (arc, amperage jobs, etc. can be adjusted from the torch) Blsdpfewbitvox Aczor ➤Fronius trolley ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) ➤Gas hose ►►► Perfect for aluminum The Fronius TPS 2700 Alu Edition is particularly suitable for welding aluminum. Precise welding technology - user-friendly operation ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the devices in? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding system series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are familiar with these devices and do not sell anything we don't know anything about.

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! Blsdpfx Acjvlwh Dszsr All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: good (used), Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm Blsdpfewu Axlex Aczor -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: MA0120, screw compressor ALMIG BELT 30 with 10 bar Aircontrol Basic control Year of construction: 2021 Operating hours: 0 h Technical specifications Type: BELT 30 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Appendix C: 4.12 m³ / min Degree of protection / insulation class drive motor: IP 55 / F Nominal power drive motor: 30 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 part 13): 76 dB (A) Length: 1270 mm Width: 890 mm Height: 1190 mm Weight: 560 kg Compressed air connection: G 1 1/2" Delivery time on request. Blsdpfxjxd T Nwe Aczsr Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: like new (used), Year of construction: 1994, AIR COMPRESSOR DEMAG MARATHON 301 Producer: DEMAG Type: MA301/9AS Pressure: 9 BAR Capacity: 28 m3/min. Serial No. 50557900 Motor: 260 kW Production date: 1994 Counter: 36.170 h *Auxilary systems available AIR DRYER PARKER HIROSS POLESTAR SMART Bedei Ewinjpfx Aczslr Producer: PARKER HIROSS Type: PST460 Serial No. 398037030001 Voltage: 400 V Frequency: 50 Hz Max air in: 65 celsius Serial No. 50557900 Motor: 6,26 kW Production date: 03/2011 Weight: 525 kg Refrigerant: 407C 7,5 kg

Year of construction: 2021, condition: as good as new (ex-display), NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD990 Blodpjipm Aqofx Aczjr Type: ALM-RD990 incl. 2 x air filters Delivery quantity: 15,50 m³ / min * Compressed air connection 2 " Dimensions L x W x H: 948 x 728 x 1370 mm Weight: 220 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 16, Used ALMIG ALM 180 air dryer Year 2016 used good condition immediately available Volume: 2,67 m³/min working pressure 7 bar maximum working pressure 16 bar connection : 1" elektrical voltage : 230 V Elektr. power: 0,60 kW Blodpfx Aceffyctozjr Dimension and weight: height: 601 mm width: 393 mm length: 891 mm weight: 53 kg

Year of construction: 2022, condition: as good as new (ex-display), NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD660 Type: ALM-RD660 incl. 2 x air filters Delivery quantity: 10.38 m³ / min * Compressed air connection 2 " Dimensions L x W x H: 678 x 648 x 1157 mm Weight: 165 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Bljdpfx Aceipm Huezsr Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2016, condition: excellent (used), machine/vehicle number: ALM1320400 0816004, used ALMIG dryer ALM1530 year 2016 very good condition Technical specifications: Model: ALM1320 Medium: compressed air, free from aggressive components Flow rate: 20.00 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 2 1/2" Electric power supply: 400 V±10%/3/PE ; 460 V±10%/3/PE Blodpoix Al Refx Aczjr Frequency: 50/60 Hz Dimensions, weight Height: 1510mm Width: 1129 mm Length: 857 mm Weight: 314 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0171, Screw compressor ALMIG BELT XP 15 - 10 bar (air cooled) Year 2022 / IMMEDIATELY AVAILABLE! Blsdpoityz Djfx Aczer Technical specifications Type: BELT XP 15 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1,95 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 15 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 71 dB (A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 370 kg Compressed air connection: G 3/4" Visit our store.

Year of construction: 2023, condition: as good as new (ex-display), functionality: fully functional, Exhibit, immediately available: new screw compressor ALMIG BELT XP 22 - 10 bar with Aircontrol Basic control The compressor is in very good condition, but visually has a dent. year: 2023 Operating hours: 1,5 Bh Specifications Type : BELT XP 22 Operating pressure : 10 bar(ue) Flow rate, according to ISO 1217 Annex C : 3.34 m³/min Degree of protection / insulation class drive motor : IP 55/ISO F Nominal power drive motor : 22 kW Operating voltage / frequency : 400/50 V/Hz Sound pressure level (DIN 45635 T.13) : 74 dB(A) Length : 1250 mm Width : 880 mm Height : 1515 mm Weight : 681 kg Compressed air connection : G 1" Visit our shop in Erlangen. Bjdpfx Acelnlt Ujzolr We always have a wide range of new and used compressors in stock.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3 h, overall weight: 610 kg, total length: 1,250 mm, total width: 880 mm, total height: 1,520 mm, Screw compressor ALMIG BELT XP 16 - 10 bar (air cooled) Year 2024 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 16 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 2.13 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 15 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 73 dB (A) Length: 1250 mm Width: 880 mm Height: 1515 mm Weight: 610 kg Bjdpjtuc Drjfx Aczolr Compressed air connection: G 1" Visit our store.

Condition: used, High pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Siemens, blower radial fan type 2CF2 052-2EA2 -Engine power: 0.06 kW / 2900 rpm -Volume flow: 0.026 m³/s -Pressure: 500 N/m² Blodpfxsun Dvvj Aczjr -Protection class: IP 55 -Fan wheel: Ø 200 x 25 mm -Connection input: Ø 75 mm -Connection output: Ø 42 mm -Number: 3x blowers available -Price: per piece -Dimensions: 310/270/H270 mm -Weight: 5.5 kg/piece

Condition: used, Year of construction: 2019, functionality: fully functional, Rehm MIG/MAG welding machine FOCUS.ARC P 450 W incl. Rehm Advanced carriage for 50 l bottle with drive-on ramp and parking brake from specialist welding technology dealer - Water-cooled - Max. 460 amperes - 60% duty cycle at maximum current - 100% duty cycle at 400 amperes Bodpfxjwvqwxs Aczolr - Year of construction: 2019 - Connection: 400V/32A - Weight: 59 kg - Year of construction - With SIRIUS control panel - Equipped with all Rehm FOCUS welding processes (FOCUS.PULS, FOCUS.ROOT, POWER.PULS, FOCUS.ARC) - Job memory for up to 500 jobs

Condition: used, Year of construction: 2021, functionality: fully functional, We are the official COBOT Partner of LORCH Sweisstechnik GmbH. in Hungary. LORCH Cobot PushpullTIG + MIG/MAG DEMO Welding System (2 in 1) The system is used, used as a DEMO system. Bedpfxjwnc Aqo Aczolr 2 in 1 system Can be used as either MIG/MAG or TIG system. The system includes: • UR 10CB 3 robot arms • LORCH COBOT MIG/MAG welding system • LORCH COBOT PushPull TIG welding system • EN 14732 Cobot machine operator international certification (for 1 person, valid only for Hungary) • Siegmund welding table is optional, the price does not include • The price does not include the cost of delivery and training Contact us for details!

Condition: refurbished (used), functionality: fully functional, welding current (max.): 280 A, Note: This is a Trade-in. For sale: Saf-Fro Safmig 300 BLX 30-280 AMP 400 Volt 2/4 Step 4 Roller drive 12 Steps adjustable Soft start Spot welding Interval welding Steel – Stainless Steel welable Refurbished, serviced, and tested. Including a Parweld PRO3600 wlding torch, earth work lead, gas cable, and interconnection hose. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Bodpfjx Av Awex Aczolr The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of cooling: air, welding current (max.): 280 A, For sale: VLH TR 280 C 280 AMP 400 Volts 21 steps adjustable 2/4 Step Spot welding Steel and Stainless Steel weldable Refurbished, tested, and Serviced Test welding possible Including: 3 Meter Mig welding torch, earth work lead with clamp, and gas cable. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Blodpfsx Af Agsx Aczor OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 30-400 AMP 50% ED 400A 60% ED 365A 100% ED 283A 400 Volt Water-cooled Bledpjxz Av Iofx Aczer Pulse Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, & tested Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 60% duty cycle: 350 A, welding current at 100% duty cycle: 300 A, welding current (min.): 20 A, welding current (max.): 350 A, For sale: Kolarc XM350 20-350A 400 Volt +- 10% Water-cooled Pulse Double Pulse XRoot XDeep Blodpexyh Akjfx Aczor Position XStabil XCold 406 Fixed programs Program memory 4 Roller drive New Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and interconnection package. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (max.): 300 A, Zu verkauf: Lascentrum Multimig 300 MV 300 AMP 400 Volt Gas-cooled 2/4 Step 4 Roller drive Stick option Steel and Stainless Steel weldable Refurbished, tested, and serviced Including MIG Welding torch, earth work lead with clamp, and gas cable. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Blsdpfx Acoxyhx Eezor We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: air, welding current at 60% duty cycle: 273 A, welding current at 100% duty cycle: 212 A, welding current (min.): 30 A, welding current (max.): 300 A, OTC CPTX-i 300C 30-300A Synergic 4 Roller Drive Fixed Programs Steel & Stainless Steel Weldable Including: 4 meter PRO2500 Mig Welding Torch 5 Meter Earth Work lead with Clamp and Dinse plug Gas cable 0,8-1,0mm Wire feed rolls Pressure regulator Manual Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Blsdpoxtuhaefx Aczsr OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, warranty duration: 36 months, type of cooling: water, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 370 A, welding current (min.): 30 A, welding current (max.): 500 A, Because the Demo time is over for this machine, we can provide you with a one time offer for the P503L. For sale: OTC ARXIS P503L 30-500 AMP (100% 370A) 400 Volt Synergic Pulse Double Pulse Low Spatter 2/4 Step 4 Roller drive Digital display Pre gas Post gas Up slope Down slope Start current End current Hot start Soft start Steel – Stainless Steel – Aluminum – CuSi – CuAl – Inconel – Titanium weldabke Blodjxtfn Rjpfx Aczor Demo Model Including 4 Meter PRO5000 Welding torch, ground cable with clamp, gas hose, 0,9M interconnection package, and 3 Years Warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of cooling: water, welding current (max.): 380 A, Note: This is a Trade-in. For sale: VLH TR380C 380 AMP 400 Volt Water-cooled 21 Steps adjustable 2/4 Step 4 Roller drive Spot welding Steel – Stainless Steel weldable Refurbished, serviced, and tested Including Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Blsdpfsxr U E Nsx Aczjr We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.